Wraps by car

Toyota Picnic wrap

This Toyota Picnic wrap page covers the first-generation van from 1996 to 2001 and the second generation from 2001 to 2009. A full wrap of either body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film. Add roughly 10 ft (3 m) more when the design uses chrome or patterned vinyl wrap.

2generations19.5 mof film for a full wrap

Toyota Picnic, second generation, factory photo
Toyota Picnic, second generation. Factory color shown.

Toyota Picnic wrap colors and ideas

  • Picnic black wrap
  • Picnic white wrap
  • Picnic gray wrap
  • Picnic silver wrap
  • Picnic red wrap
  • Picnic blue wrap
  • Picnic green wrap
  • Picnic yellow wrap
  • Picnic orange wrap
  • Picnic purple wrap
  • Picnic pink wrap
  • Picnic teal wrap
  • Picnic brown wrap
  • Picnic gold wrap
  • Picnic chrome wrap
  • Picnic color shift wrap
  • Picnic carbon fiber wrap
  • Picnic camo and patterned wrap

How much vinyl to wrap a Toyota Picnic

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2009van (5 doors)178.3 in (4,530 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1996–2001van (5 doors)178.3 in (4,530 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Picnic wrap cost factors

The Picnic wrap cost depends on the film coverage, the film type and the condition of the paint. A full wrap of this 178.3-inch (4,530 mm) van takes about 64 ft (19.5 m) of cast film, while a chrome or patterned design takes about 74 ft (22.5 m). Partial wraps and paint protection film use less material but add labor for cut edges and tight areas.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Picnic wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Picnic, second generation, factory photo
Factory color shown

2001–2009 Picnic van (second generation)

2001–2009van (5 doors)178.3 in (4,530 mm)

The second-generation Toyota Picnic, made from 2001 to 2009, carries body code XM20 and keeps the same five-door van shape. The sliding side doors set the main cut line on each side because the tracks stay bare. An installer trims along the track edge rather than trying to wrap over the moving parts.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Toyota Picnic, first generation, factory photo
Factory color shown

1996–2001 Picnic van (first generation)

1996–2001van (5 doors)178.3 in (4,530 mm)

The first-generation Toyota Picnic, made from 1996 to 2001, uses body code XM10 with the same 178.3 in (4,530 mm) length. Paint age matters on a car of these years because each panel may be original or repainted. A test spot on the paint comes before a full wrap to check how the film adheres.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Picnic

A Toyota Picnic partial wrap can cover the roof, the hood and the mirror caps without wrapping the whole van. Picnic chrome delete turns the bright window trim and badges black with a narrow film. Clear paint protection film on the front end shields the bumper and hood from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Picnic: body, cut-outs and film

The Toyota Picnic vinyl wrap covers a five-door minivan with a body length of 178.3 in (4,530 mm) in both generations. One size of film works for either generation because the outer dimensions stay the same. The tall roof and long sides mean a full wrap uses more film than a compact hatchback.

Picnic wrap ideas begin with the long side panels and the sliding side doors. The door tracks stay bare, and the film is cut along them so the doors keep moving freely. Door handles, mirror caps and badges are removed for a clean edge around the wrap.

How much vinyl to wrap a Picnic stays the same from 1996 through 2009 because the body length and height did not change. Both generations use about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a single-color wrap. A chrome or patterned design calls for about 74 ft (22.5 m) of the same width.

Questions about wrapping a Toyota Picnic

How much vinyl does it take to wrap a Toyota Picnic?

A Toyota Picnic takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for a full wrap. That figure is for the newest body, the second generation from 2001 to 2009, and it also fits the first generation because the dimensions match. A design with chrome or patterned film needs about 74 ft (22.5 m) instead.

Are the sliding doors of a Picnic wrapped?

The sliding doors of a Picnic are wrapped, but the tracks are left bare. The film is cut along the track edges so the doors can open and close without rubbing the wrap. Those cut lines become part of the design around the side doors.

Can I wrap only the hood or the roof of a Picnic?

You can wrap only the hood or the roof of a Toyota Picnic as a partial job. The roof, the hood and the mirror caps are the usual pieces for a partial wrap on this van. Paint protection film on the front end is another way to cover only part of the car.

Is a Picnic hard to wrap?

A Picnic is not the hardest car to wrap, but the size and the sliding doors add work. The long five-door body uses about 64 ft (19.5 m) of film, which means more time on the sides and roof. The sliding door tracks stay bare, so the installer must cut a clean line along each track.