Wraps by car

Toyota Pixis Epoch wrap

The Toyota Pixis Epoch wrap page covers one generation of this mini hatchback, produced from 2012 to 2017. A full vinyl wrap on a 2012–2017 Pixis Epoch takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 52 ft (16 m) for the same body.

1generations13.5 mof film for a full wrap

Toyota Pixis Epoch, first generation, factory photo
Toyota Pixis Epoch, first generation. Factory color shown.

Toyota Pixis Epoch wrap colors and ideas

  • Pixis Epoch black wrap
  • Pixis Epoch white wrap
  • Pixis Epoch gray wrap
  • Pixis Epoch silver wrap
  • Pixis Epoch red wrap
  • Pixis Epoch blue wrap
  • Pixis Epoch green wrap
  • Pixis Epoch yellow wrap
  • Pixis Epoch orange wrap
  • Pixis Epoch purple wrap
  • Pixis Epoch pink wrap
  • Pixis Epoch teal wrap
  • Pixis Epoch brown wrap
  • Pixis Epoch gold wrap
  • Pixis Epoch chrome wrap
  • Pixis Epoch color shift wrap
  • Pixis Epoch carbon fiber wrap
  • Pixis Epoch camo and patterned wrap

How much vinyl to wrap a Toyota Pixis Epoch

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2017hatchback (5 doors)133.7 in (3,395 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Pixis Epoch wrap cost factors

Pixis Epoch wrap cost depends on the size of the car and the film type. The car is 133.7 in (3,395 mm) long, so a full cast film wrap takes about 44 ft (13.5 m) of 60-inch (1.52 m) film. Chrome or patterned film uses about 52 ft (16 m), which changes the material cost. The condition of the paint and any trim removal also affect the labor.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Pixis Epoch wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Pixis Epoch, first generation, factory photo
Factory color shown

2012–2017 Pixis Epoch hatchback (first generation)

2012–2017hatchback (5 doors)133.7 in (3,395 mm)

The first generation Toyota Pixis Epoch, built from 2012 to 2017, may have original or repainted panels. Test spots are done before a full wrap to check paint adhesion on older paint. A repainted panel can react differently to the vinyl adhesive. The wrap shop always checks this on the car before cutting film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Pixis Epoch

The Pixis Epoch can receive a partial wrap on the roof, hood, or mirror caps instead of a full color change. A chrome delete covers the window trim and badges with black film to remove bright accents. Paint protection film (PPF) on the front end uses clear film to guard the hood, bumper, and mirrors. Each of these jobs uses less material than the full wrap estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Pixis Epoch: body, cut-outs and film

The Toyota Pixis Epoch vinyl wrap suits its single hatchback body style with five doors and a length of 133.7 in (3,395 mm). The compact size keeps panel areas small, so a full wrap uses less film than on a larger car. The five-door layout means four side doors, a hood, roof, and tailgate are wrapped. The rear tailgate includes the rear glass, so the film stops at the glass edge.

Pixis Epoch wrap ideas start with the tailgate, where the installer cuts the film at the edge of the rear glass. The window trim and badges are removed for a chrome delete, which covers bright trim with black film. Door handles, mirrors, and antenna may also come off for a cleaner edge. The front bumper is wrapped in place after masking the grille and lights.

To work out how much vinyl to wrap a Pixis Epoch, count the body style and the generation of the car. The catalog lists one generation, the 2012–2017 hatchback, so the estimate stays the same for all years. A partial wrap uses less film than the full 44 ft (13.5 m) estimate. Extra film is needed if the car has a patterned or chrome film, about 52 ft (16 m) in total.

Questions about wrapping a Toyota Pixis Epoch

How much vinyl does it take to wrap a Toyota Pixis Epoch?

A Toyota Pixis Epoch takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast vinyl film for a full wrap. Chrome or patterned film needs about 52 ft (16 m). This figure covers the 2012–2017 hatchback body. A partial wrap uses less film.

Can I wrap only the hood or the roof of a Pixis Epoch?

Yes, the roof or hood of a Pixis Epoch can be wrapped alone. The partial wrap options on this car include the roof, hood, and mirror caps. A single panel uses less film than the full body estimate. These jobs are counted as partial wraps in the catalog.

Is a Pixis Epoch hard to wrap?

The Pixis Epoch is not especially hard to wrap, but the tailgate adds work. The rear glass sits in the tailgate, so the film must be trimmed at the edge of the glass. The car is small at 133.7 in (3,395 mm), which makes panels easier to handle. The five-door body has more door gaps to trim than a two-door.

How many generations of the Pixis Epoch does this page cover?

This page covers one generation of the Toyota Pixis Epoch, the first generation from 2012 to 2017. The catalog lists only that generation. There are no other generations of this model in the wrap data.