Wraps by car

Toyota Pixis Space wrap

The Toyota Pixis Space wrap covers the first generation of this mini van, built from 2011 to 2017. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, allow about 57 ft (17.5 m). The Pixis Space has one generation in this catalog.

1generations15 mof film for a full wrap

Toyota Pixis Space, first generation, factory photo
Toyota Pixis Space, first generation. Factory color shown.

Toyota Pixis Space wrap colors and ideas

  • Pixis Space black wrap
  • Pixis Space white wrap
  • Pixis Space gray wrap
  • Pixis Space silver wrap
  • Pixis Space red wrap
  • Pixis Space blue wrap
  • Pixis Space green wrap
  • Pixis Space yellow wrap
  • Pixis Space orange wrap
  • Pixis Space purple wrap
  • Pixis Space pink wrap
  • Pixis Space teal wrap
  • Pixis Space brown wrap
  • Pixis Space gold wrap
  • Pixis Space chrome wrap
  • Pixis Space color shift wrap
  • Pixis Space carbon fiber wrap
  • Pixis Space camo and patterned wrap

How much vinyl to wrap a Toyota Pixis Space

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2017van (5 doors)133.7 in (3,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Pixis Space wrap cost factors

Pixis Space wrap cost depends on film area, film type, and the labor for the sliding doors. The van needs about 49 ft (15 m) of film, and a chrome or patterned film raises the material requirement to about 57 ft (17.5 m). The sliding door tracks add cutting time because the film must be trimmed along them. A partial wrap or chrome delete uses less film than a full color change.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Pixis Space wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Pixis Space, first generation, factory photo
Factory color shown

2011–2017 Pixis Space van (first generation)

2011–2017van (5 doors)133.7 in (3,395 mm)

The first generation Toyota Pixis Space, made from 2011 to 2017, is a five-door van with sliding side doors. On these doors the tracks stay bare and decide where the film is cut. The body is 133.7 in (3,395 mm) long and shares the same wrap dimensions across the generation. Only one body style exists, so film estimates do not change between years.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Pixis Space

A partial wrap on a Toyota Pixis Space can cover the roof, hood, and mirror caps without wrapping the whole van. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF), a clear film on the front end, shields the hood and bumper from stone chips. These smaller jobs use less film than a full wrap and leave the sliding doors untouched.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Pixis Space: body, cut-outs and film

A Toyota Pixis Space vinyl wrap covers a compact van body, so its small size keeps material use moderate. The five-door van measures 133.7 in (3,395 mm) long, which is short for a van. Sliding side doors reduce the number of hinged panels to wrap. The tall, boxy shape means large flat areas but more vertical surface than a small hatchback.

Pixis Space wrap ideas start with the sliding side doors, where the door tracks stay bare and the film is cut along them. The door handles, mirrors, and badges need precise cut-outs or removal. The front and rear bumpers wrap in multiple pieces because of their curves. The roof is accessible and adds a large continuous panel if you want a contrast color.

How much vinyl to wrap a Pixis Space depends on the film type and waste allowance. The estimate for a full wrap is about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 57 ft (17.5 m) because pattern matching and extra trimming increase waste. The first generation is the only body in this catalog, so the figures apply to all years from 2011 to 2017.

Questions about wrapping a Toyota Pixis Space

How much vinyl does it take to wrap a Toyota Pixis Space?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Toyota Pixis Space fully. If you use chrome or patterned film, the amount rises to about 57 ft (17.5 m) because of extra waste. This estimate is for the newest body, the first generation from 2011 to 2017.

Are the sliding doors of a Pixis Space wrapped?

Yes, the sliding doors of a Pixis Space are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can open and close freely. The tracks themselves are left unwrapped to avoid interfering with the sliding mechanism.

Can I wrap only the hood or the roof of a Pixis Space?

Yes, you can wrap only the hood or the roof of a Pixis Space. A partial wrap can include the hood, roof, and mirror caps as separate pieces. This uses far less film than a full wrap and is a good first project on this van.

Is a Pixis Space hard to wrap?

A Pixis Space is moderately hard to wrap because of its sliding door tracks. The film must be trimmed along the tracks, and the van's tall, boxy sides create large vertical areas. At 133.7 in (3,395 mm) long, the body is small enough to manage in a home garage, but the doors add cutting time.