Wraps by car

Toyota Platz wrap

The Toyota Platz wrap page covers the first-generation sedan built from 1999 to 2005. A full vinyl wrap of this subcompact body needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film pushes the estimate to about 59 ft (18 m).

1generations15.5 mof film for a full wrap

Toyota Platz, first generation, factory photo
Toyota Platz, first generation. Factory color shown.

Toyota Platz wrap colors and ideas

  • Platz black wrap
  • Platz white wrap
  • Platz gray wrap
  • Platz silver wrap
  • Platz red wrap
  • Platz blue wrap
  • Platz green wrap
  • Platz yellow wrap
  • Platz orange wrap
  • Platz purple wrap
  • Platz pink wrap
  • Platz teal wrap
  • Platz brown wrap
  • Platz gold wrap
  • Platz chrome wrap
  • Platz color shift wrap
  • Platz carbon fiber wrap
  • Platz camo and patterned wrap

How much vinyl to wrap a Toyota Platz

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2005sedan (4 doors)163.2 in (4,145 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Platz wrap cost factors

Platz wrap cost depends on the size of the panels and the amount of film, about 51 ft (15.5 m) for a standard color change. The condition of the paint and the need for repairs also change the labor. A chrome delete or partial wrap uses less material than a full wrap.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).

Platz wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Platz, first generation, factory photo
Factory color shown

1999–2005 Platz sedan (first generation)

1999–2005sedan (4 doors)163.2 in (4,145 mm)

The first-generation Toyota Platz was built from 1999 to 2005, so the paint may be original or repainted. A test spot on a small area shows whether the film will adhere well before a full wrap. Any rust or peeling clear coat must be fixed first, because film will not hide it.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Platz

A partial wrap on the Platz covers the roof, hood, or mirror caps while leaving the rest of the paint exposed. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Platz: body, cut-outs and film

A Toyota Platz vinyl wrap suits the sedan's four-door body and compact 163.2 in (4,145 mm) length. The short roof and narrow pillars reduce the amount of film needed compared with larger cars. The trunk lid and bumpers are straightforward to cover in one piece each.

Platz wrap ideas start with the mirrors, door handles, and window trims, which need careful cut-outs. The badges and the antenna should be removed before the film goes on to avoid bubbles. The bumpers have recessed areas that take extra time to tuck cleanly.

Knowing how much vinyl to wrap a Platz comes down to the single XP10 generation. The sedan body did not change shape over the production run. A wrap shop only needs to account for a sedan, not a hatchback or wagon.

Questions about wrapping a Toyota Platz

How much vinyl does it take to wrap a Toyota Platz?

A Toyota Platz needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you use chrome or patterned film, order about 59 ft (18 m) to allow for matching the design.

Can I wrap only the hood or the roof of a Platz?

Yes, you can wrap only the hood or the roof of a Platz. Partial wraps are offered for the roof, hood, and mirror caps, and they use less film than a full wrap.

Is a Platz hard to wrap?

A Platz is not hard to wrap, but the small size and the recessed bumper areas add time. The door handles and window trims need careful cut-outs, and the old paint may need preparation before the film goes on.

How many generations of the Platz does this page cover?

This page covers one generation of the Toyota Platz. The first generation, the XP10 sedan, was produced from 1999 to 2005 and is the only body style in the catalog.