Wraps by car

Toyota Porte wrap

A Toyota Porte wrap covers this compact minivan with cast vinyl film sized to its body. The catalog lists two generations of the Porte, the first from 2004 to 2012 and the second from 2012 to 2020. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

2generations18.5 mof film for a full wrap

Toyota Porte, second generation, factory photo
Toyota Porte, second generation. Factory color shown.

Toyota Porte wrap colors and ideas

  • Porte black wrap
  • Porte white wrap
  • Porte gray wrap
  • Porte silver wrap
  • Porte red wrap
  • Porte blue wrap
  • Porte green wrap
  • Porte yellow wrap
  • Porte orange wrap
  • Porte purple wrap
  • Porte pink wrap
  • Porte teal wrap
  • Porte brown wrap
  • Porte gold wrap
  • Porte chrome wrap
  • Porte color shift wrap
  • Porte carbon fiber wrap
  • Porte camo and patterned wrap

How much vinyl to wrap a Toyota Porte

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2020van (3 doors)157.1 in (3,990 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2004–2012van (3 doors)157.1 in (3,990 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Porte wrap cost factors

Porte wrap cost depends on the size of the vehicle, the film chosen and the work on the sliding door. This minivan needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. Chrome or patterned film raises the amount to about 69 ft (21 m), which adds material cost.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: van (3 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Two long side doors: each door is one large piece of film.

Porte wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Porte, second generation, factory photo
Factory color shown

2012–2020 Porte van (second generation)

2012–2020van (3 doors)157.1 in (3,990 mm)

The second generation Toyota Porte, built from 2012 to 2020, has sliding side doors where the tracks stay bare and decide where the film is cut. The film is trimmed along the track edges so the door still moves freely. This generation is 157.1 in (3,990 mm) long and needs about 61 ft (18.5 m) of film for a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Two long side doors: each door is one large piece of film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Toyota Porte, first generation, factory photo
Factory color shown

2004–2012 Porte van (first generation)

2004–2012van (3 doors)157.1 in (3,990 mm)

The first generation Toyota Porte, built from 2004 to 2012, often has older paint that may be original or repainted. A test spot comes before a full wrap to check how the paint holds under the film. Panels that have been repainted may need extra prep so the vinyl sticks evenly.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Two long side doors: each door is one large piece of film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Porte

A partial wrap on a Toyota Porte can cover the roof, the hood or the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is also an option as a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Porte: body, cut-outs and film

The Toyota Porte vinyl wrap follows the shape of a three-door van with one large sliding side door on the passenger side. The body is 157.1 in (3,990 mm) long, so the side panels are tall and the roof is a long, flat piece. Because the sliding door dominates one side, the wrap is planned around that door and its track.

Porte wrap ideas start with the sliding side door tracks: the tracks stay bare, and the film is cut along them. The two long side doors are each wrapped as one large piece of film. The door handles, mirror caps and badges come off for a clean edge, and the roof rails may need to be removed if fitted.

To know how much vinyl to wrap a Porte, you compare the two generations. Both the 2004–2012 and the 2012–2020 bodies are 157.1 in (3,990 mm) long and use the same door layout. The film estimate is the same for both: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Toyota Porte

How much vinyl does it take to wrap a Toyota Porte?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Toyota Porte. The figure is for a full wrap of the newest body, which is 157.1 in (3,990 mm) long. If you use chrome or patterned film, plan for about 69 ft (21 m).

Are the sliding doors of a Porte wrapped?

Yes, the sliding doors of a Porte are wrapped. The door tracks stay bare, and the film is cut along them. Each sliding door is a large piece of film that covers the panel up to the track.

Can I wrap only the hood or the roof of a Porte?

Yes, you can wrap only the hood or the roof of a Porte. A partial wrap on this car may also include the mirror caps. Another option is a chrome delete on the window trim and badges.

Is a Porte hard to wrap?

A Porte is not the hardest car to wrap, but the sliding side doors add work. The door tracks stay bare, so the film must be cut along them. The two long side doors are each one large piece, and the body is 157.1 in (3,990 mm) long.