Wraps by car

Toyota Premio wrap

The Toyota Premio wrap page covers the mid-size sedan from its first generation in 2001 through the second generation ending in 2021. Toyota built two generations of the Premio, each with a four-door sedan body. A vinyl wrap of the newest Premio body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

2generations17 mof film for a full wrap

Toyota Premio, second generation, factory photo
Toyota Premio, second generation. Factory color shown.

Toyota Premio wrap colors and ideas

  • Premio black wrap
  • Premio white wrap
  • Premio gray wrap
  • Premio silver wrap
  • Premio red wrap
  • Premio blue wrap
  • Premio green wrap
  • Premio yellow wrap
  • Premio orange wrap
  • Premio purple wrap
  • Premio pink wrap
  • Premio teal wrap
  • Premio brown wrap
  • Premio gold wrap
  • Premio chrome wrap
  • Premio color shift wrap
  • Premio carbon fiber wrap
  • Premio camo and patterned wrap

How much vinyl to wrap a Toyota Premio

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2021sedan (4 doors)180.9 in (4,595 mm) to 181.1 in (4,600 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2001–2007sedan (4 doors)181.1 in (4,600 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Premio wrap cost factors

Premio wrap cost depends on how much film the car needs, the film line and the labor of the shop. The Premio is a mid-size sedan that takes about 56 ft (17 m) of cast film for a color change, or about 66 ft (20 m) for chrome or patterned film. A shop charges more for patterned film because the pattern must be matched at every seam and the waste is higher. Restyled bumpers and lights on the second generation add cutting time and can raise the labor estimate.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Restyled in 2010, 2016: bumpers and lights differ between the versions, and so do the film cuts.

Premio wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Premio, second generation, factory photo
Factory color shown

2007–2021 Premio sedan (second generation)

2007–2021sedan (4 doors)180.9 in (4,595 mm) to 181.1 in (4,600 mm)

The second generation Toyota Premio, built from 2007 to 2021, was restyled in 2010 and 2016. Each restyling changed the front and rear bumpers and the lights, so film cut for one version does not fit the other. A kit made for a 2009 Premio will not match a 2011 car at the bumper corners or light openings. When you count film for this generation, confirm the exact year and trim to order the right pattern.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Toyota Premio, first generation, factory photo
Factory color shown

2001–2007 Premio sedan (first generation)

2001–2007sedan (4 doors)181.1 in (4,600 mm)

The first generation Toyota Premio, built from 2001 to 2007, was restyled once in 2004. On a car of these years the paint may be original or repainted, and a test spot comes before a full wrap. The test spot shows whether the film adhesive bonds well to the old clear coat or a resprayed panel. The sedan body is nearly the same length as the second generation, so the film count stays about 56 ft (17 m).

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Premio

A partial wrap on a Premio covers the roof, hood or mirror caps, and a chrome delete covers the window trim and badges. The roof alone uses less than a third of the film needed for a full wrap, and it is one of the easiest panels to wrap. For paint protection film (PPF), a clear film on the front end protects the hood, fenders and bumper from stone chips. A Premio chrome delete in black film changes the look of the side window surround and the trunk badge.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Premio: body, cut-outs and film

A Toyota Premio vinyl wrap fits a four-door sedan between 180.9 in (4,595 mm) and 181.1 in (4,600 mm) long. The simple three-box shape keeps the main panels flat and reduces film waste on the doors and rear quarters. The roof is a single large piece, and the hood and trunk wrap without deep recesses. Sedan proportions mean a single installer can manage most panels without a second pair of hands.

Premio wrap ideas start with the areas that need cut-outs or removal: door handles, mirror caps, antenna, badges and the front and rear bumpers. The door handles and mirror caps come off for clean edges, and the antenna base is unbolted before the roof film goes down. Badges are removed for a smooth deck lid and can be reinstalled with new tape. The front bumper on the second generation has grille openings that call for relief cuts and inlays.

How much vinyl to wrap a Premio depends mainly on the generation and the restyling years. The first generation from 2001 to 2007 and the second from 2007 to 2021 both list about 56 ft (17 m) of 60-inch film for a color change. The second generation was restyled in 2010 and 2016; the bumper and light shapes changed each time, so a pattern made for one version does not fit another. For chrome or patterned film with directional texture, allow about 66 ft (20 m) to match the pattern across panels.

Questions about wrapping a Toyota Premio

How much vinyl does it take to wrap a Toyota Premio?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Toyota Premio. The newest Premio body is a four-door sedan, and the film estimate for a full color change is 56 ft (17 m). For chrome or patterned film, allow about 66 ft (20 m) to match the pattern across the larger panels.

Which years of the Premio take the same film cuts?

The years of the Premio that take the same film cuts are 2001 to 2004, 2004 to 2007, 2007 to 2010, 2010 to 2016 and 2016 to 2021. The first generation was restyled in 2004, and the second generation was restyled in 2010 and 2016. A film pattern made for one of these periods does not fit the others because the bumpers and lights changed.

Can I wrap only the hood or the roof of a Premio?

Yes, you can wrap only the hood or the roof of a Premio. The hood and roof are part of the partial wrap jobs listed for this car, along with mirror caps. A roof wrap uses less than a third of the film needed for a full wrap, and the hood is a single flat panel with no cut-outs.

Is a Premio hard to wrap?

A Premio is not hard to wrap, but the mid-size sedan body and the restyled bumpers add work. The main panels are flat and the four-door shape is straightforward for one installer. The second generation has grille openings and changed light shapes after the 2010 and 2016 restyling, so the bumper takes more relief cuts and inlays. The extra length means each side is a long single piece, which calls for careful squeegee work to avoid wrinkles.