Wraps by car

Toyota Previa wrap

The Toyota Previa wrap page covers all three generations of this mid-engine minivan. The catalog lists the 1990–1999, 2000–2006, and 2006–2019 bodies. A full vinyl wrap of the newest Previa takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 82 ft (25 m).

3generations21.5 mof film for a full wrap

Toyota Previa, third generation, factory photo
Toyota Previa, third generation. Factory color shown.

Toyota Previa wrap colors and ideas

  • Previa black wrap
  • Previa white wrap
  • Previa gray wrap
  • Previa silver wrap
  • Previa red wrap
  • Previa blue wrap
  • Previa green wrap
  • Previa yellow wrap
  • Previa orange wrap
  • Previa purple wrap
  • Previa pink wrap
  • Previa teal wrap
  • Previa brown wrap
  • Previa gold wrap
  • Previa chrome wrap
  • Previa color shift wrap
  • Previa carbon fiber wrap
  • Previa camo and patterned wrap

How much vinyl to wrap a Toyota Previa

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2019van (5 doors)188.8 in (4,795 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
2000–2006van (5 doors)188.2 in (4,780 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)
1990–1999van (4 doors)187.6 in (4,765 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)

Previa wrap cost factors

Previa wrap cost is set by film choice, body size, and the condition of the vehicle. A full wrap needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film on any generation. Chrome or patterned film adds about 10–12 ft (3–3.7 m) more. The tall body and sliding doors also add labor time.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Previa wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Previa, third generation, factory photo
Factory color shown

2006–2019 Previa van (third generation)

2006–2019van (5 doors)188.8 in (4,795 mm)

The third-generation Previa (2006–2019) has sliding side doors that decide where the film is cut. The door tracks stay bare because film cannot stick inside the channel. This leaves a sharp line along the track edges. The installer trims the film exactly to that line.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Toyota Previa, second generation, factory photo
Factory color shown

2000–2006 Previa van (second generation)

2000–2006van (5 doors)188.2 in (4,780 mm)

The second-generation Previa (2000–2006) stands 70.1 in (1,780 mm) tall. That height means the roof is wrapped from a platform, which takes more time and care. The tall body also means longer vertical panels on the sides. A full wrap of this generation needs about 70 ft (21.5 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (70.1 in (1,780 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Toyota Previa, first generation, factory photo
Factory color shown

1990–1999 Previa van (first generation)

1990–1999van (4 doors)187.6 in (4,765 mm)

The first-generation Previa (1990–1999) may have original or repainted panels after all these years. Paint age matters because old paint can fail when film is removed. A test spot comes before a full wrap to check adhesion. This generation is 187.6 in (4,765 mm) long and needs about 70 ft (21.5 m) of cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a sunroof: the roof film is cut around its opening.

A tall body (71.3 in (1,810 mm)): the roof is wrapped from a platform.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Roof, hood, chrome delete and PPF on a Previa

A partial wrap on a Toyota Previa can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Previa: body, cut-outs and film

The Toyota Previa vinyl wrap job starts with a minivan body that is long and tall. The third generation is 188.8 in (4,795 mm) long, while the first generation is 187.6 in (4,765 mm). All three generations are five-door vans except the first generation, which has four doors. The large body panels need wide film and careful placement.

Previa wrap ideas must account for sliding side doors on every generation. The door tracks stay bare, and the film is cut along them for a clean edge. On some first-generation trims, a sunroof means the roof film is cut around its opening. The tall body means the roof is wrapped from a platform on all generations.

How much vinyl to wrap a Previa depends on the generation you own. The first and second generations need about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. The third generation also needs about 70 ft (21.5 m) of cast film. For chrome or patterned film, the first generation takes about 80 ft (24.5 m), while the newer two take about 82 ft (25 m).

Questions about wrapping a Toyota Previa

How much vinyl does it take to wrap a Toyota Previa?

About 70 ft (21.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Toyota Previa. That figure is for the newest body, the third generation from 2006–2019. Chrome or patterned film would need about 82 ft (25 m) instead. The first and second generations take the same base amount.

Are the sliding doors of a Previa wrapped?

Yes, the sliding doors of a Previa are wrapped, but the tracks are not. The film is cut along the door tracks so they stay bare and functional. This is necessary on every generation because the track is a moving part. The cut line is placed just outside the track channel.

Can I wrap only the hood or the roof of a Previa?

Yes, you can wrap only the hood or the roof of a Previa. A partial wrap can cover the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges. These smaller jobs use less film than a full wrap.

Is a Previa hard to wrap?

A Previa is harder to wrap than a small sedan because of its size and door design. The tall body means the roof is wrapped from a platform. The sliding side doors force the installer to cut along the tracks. Some first-generation trims also have a sunroof that requires a cut-out.