Wraps by car

Toyota Prius Alpha wrap

The Toyota Prius Alpha wrap page covers the first generation of this minivan, produced from 2011 to 2021. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 72 ft (22 m).

1generations19 mof film for a full wrap

Toyota Prius Alpha, first generation, factory photo
Toyota Prius Alpha, first generation. Factory color shown.

Toyota Prius Alpha wrap colors and ideas

  • Prius Alpha black wrap
  • Prius Alpha white wrap
  • Prius Alpha gray wrap
  • Prius Alpha silver wrap
  • Prius Alpha red wrap
  • Prius Alpha blue wrap
  • Prius Alpha green wrap
  • Prius Alpha yellow wrap
  • Prius Alpha orange wrap
  • Prius Alpha purple wrap
  • Prius Alpha pink wrap
  • Prius Alpha teal wrap
  • Prius Alpha brown wrap
  • Prius Alpha gold wrap
  • Prius Alpha chrome wrap
  • Prius Alpha color shift wrap
  • Prius Alpha carbon fiber wrap
  • Prius Alpha camo and patterned wrap

How much vinyl to wrap a Toyota Prius Alpha

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2021wagon (5 doors)181.7 in (4,615 mm) to 182.3 in (4,630 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Prius Alpha wrap cost factors

Prius Alpha wrap cost depends on the film area, the type of vinyl, and the amount of disassembly. A full wrap needs about 62 ft (19 m) of cast film, and chrome or patterned film adds about 10 ft (3 m). Removing door handles and trim raises labor time, which affects the total cost.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

Prius Alpha wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Prius Alpha, first generation, factory photo
Factory color shown

2011–2021 Prius Alpha wagon (first generation)

2011–2021wagon (5 doors)181.7 in (4,615 mm) to 182.3 in (4,630 mm)

The first generation Prius Alpha was built from 2011 to 2021 and restyled in 2014. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. Installers must check the production year before ordering pre-cut kits.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Prius Alpha

Prius Alpha chrome delete covers the window trim and badges with black film, leaving the paint color unchanged. A partial wrap can cover the roof, hood, or mirror caps for a two-tone look. Paint protection film (PPF) is applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Prius Alpha: body, cut-outs and film

A Toyota Prius Alpha vinyl wrap covers a five-door wagon body measuring 181.7 in (4,615 mm) to 182.3 in (4,630 mm) long. The size is close to a mid-size sedan, so material use is moderate. The tall roof and large side panels add surface area compared with a lower car.

Prius Alpha wrap ideas should account for the tailgate with rear glass in it. The film ends at the edge of the glass, leaving the window clear. Door handles, mirrors, and trim pieces require careful cutting and tucking during installation.

To know how much vinyl to wrap a Prius Alpha, use the single body style offered from 2011 to 2021. The restyling in 2014 changed the bumpers and lights, but the overall length stayed nearly the same. Film estimates differ little between early and late versions.

Questions about wrapping a Toyota Prius Alpha

How much vinyl does it take to wrap a Toyota Prius Alpha?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Toyota Prius Alpha. Chrome or patterned film needs about 72 ft (22 m) because of extra material for matching patterns.

Which years of the Prius Alpha take the same film cuts?

The Prius Alpha years 2011 to 2013 and 2014 to 2021 take different film cuts. The restyling in 2014 changed the bumpers and lights, so film cut for one version does not fit the other.

Can I wrap only the hood or the roof of a Prius Alpha?

Yes, you can wrap only the hood or the roof of a Prius Alpha. A partial wrap also covers mirror caps, and a chrome delete covers window trim and badges.

Is a Prius Alpha hard to wrap?

The Prius Alpha is not hard to wrap, but the tailgate with rear glass adds a step. The film ends at the edge of the glass, so the installer trims carefully around the window. The 181.7 in (4,615 mm) length means the roof and sides are large single panels that need two people.