Wraps by car

Toyota Pronard wrap

The Toyota Pronard wrap is a vinyl wrap applied to the first-generation full-size sedan produced from 2000 to 2003. This page covers the single generation, body code XX20, which was sold as a four-door sedan. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, and chrome or patterned film takes about 69 ft (21 m).

1generations18 mof film for a full wrap

Toyota Pronard, first generation, factory photo
Toyota Pronard, first generation. Factory color shown.

Toyota Pronard wrap colors and ideas

  • Pronard black wrap
  • Pronard white wrap
  • Pronard gray wrap
  • Pronard silver wrap
  • Pronard red wrap
  • Pronard blue wrap
  • Pronard green wrap
  • Pronard yellow wrap
  • Pronard orange wrap
  • Pronard purple wrap
  • Pronard pink wrap
  • Pronard teal wrap
  • Pronard brown wrap
  • Pronard gold wrap
  • Pronard chrome wrap
  • Pronard color shift wrap
  • Pronard carbon fiber wrap
  • Pronard camo and patterned wrap

How much vinyl to wrap a Toyota Pronard

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2003sedan (4 doors)192.7 in (4,895 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Pronard wrap cost factors

Pronard wrap cost depends on the size of the car, the film finish, and the amount of disassembly for a clean installation. The sedan requires about 59 ft (18 m) of standard film or 69 ft (21 m) of chrome or patterned film, and extra labor goes into removing badges and trim. Wrapping the large panels and long bumpers takes more time than a compact car. The final cost also changes with the condition of the paint and whether repairs are needed before the wrap.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).

Pronard wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Pronard, first generation, factory photo
Factory color shown

2000–2003 Pronard sedan (first generation)

2000–2003sedan (4 doors)192.7 in (4,895 mm)

The first-generation Toyota Pronard, built from 2000 to 2003, is the only generation this page covers. On a car of these years the panels may be original or repainted, and a test spot comes before a full wrap to check how the paint holds the adhesive. The XX20 body is a full-size sedan with a length of 192.7 in (4,895 mm). A standard wrap takes about 59 ft (18 m) of cast film, while chrome or patterned film takes about 69 ft (21 m).

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Pronard

Partial wrap options for the Pronard include the roof, hood, mirror caps, and window trim. A chrome delete covers the window trim and badges with black film, giving a cleaner look without a full color change. Paint protection film (PPF) can be applied as a clear film on the front end to guard against stone chips. These smaller jobs use less film than a full wrap and still change the car's appearance or protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Pronard: body, cut-outs and film

A Toyota Pronard vinyl wrap must cover a large four-door sedan with a length of 192.7 in (4,895 mm). The long body panels and tall roofline increase the amount of film needed compared with smaller cars. Installers use the full width of 60-inch (1.52 m) film efficiently on the hood, roof, and doors. The sedan shape has no tailgate or complex rear hatch, which keeps the rear bumper and trunk wrap straightforward.

Pronard wrap ideas include full color change wraps, satin or gloss finishes, and chrome delete on the window trim and badges. The door handles, mirrors, and antenna need cut-outs, and the front bumper has fog light openings and a grille that take extra time. The badges and window trim come off for a clean chrome delete. The side moldings and door trim can stay in place if the installer tucks film behind them carefully.

How much vinyl to wrap a Pronard depends on the year and condition of the specific car and the film pattern you choose. All Pronards share the same XX20 body, so the panel dimensions stay the same across 2000 to 2003. A standard color change wrap uses about 59 ft (18 m) of 60-inch film, while chrome or patterned film needs about 69 ft (21 m) because pattern matching creates more waste.

Questions about wrapping a Toyota Pronard

How much vinyl does it take to wrap a Toyota Pronard?

About 59 ft (18 m) of 60-inch (1.52 m) cast film is needed to wrap a Toyota Pronard, and chrome or patterned film takes about 69 ft (21 m). These figures assume a full color change wrap on the four-door sedan body. The sedan's length of 192.7 in (4,895 mm) and long panels dictate the total amount.

Can I wrap only the hood or the roof of a Pronard?

Yes, you can wrap only the hood or the roof of a Pronard. These partial wrap jobs are offered along with mirror caps, chrome delete on window trim and badges, and clear paint protection film on the front end.

Is a Pronard hard to wrap?

A Pronard is not especially hard to wrap, but its size and some details add work. The full-size sedan stretches 192.7 in (4,895 mm), so installers handle large panels and long bumpers. The door handles, mirrors, antenna, and front bumper openings need cut-outs, and the badges and trim come off for a clean chrome delete.

How many generations of the Pronard does this page cover?

This page covers one generation of the Pronard, the first generation sold from 2000 to 2003. The catalog includes only the XX20 body style, a four-door sedan, so there is no second generation listed.