Wraps by car

Toyota Publica wrap

Toyota Publica wrap coverage includes all three generations of this compact model, from 1961 to 1988. A vinyl wrap for the third generation sedan takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 49 ft (15 m) for that body. The first and second generation coupes require roughly 36 ft (11 m) of standard film.

3generations12 mof film for a full wrap

Toyota Publica, third generation, factory photo
Toyota Publica, third generation. Factory color shown.

Toyota Publica wrap colors and ideas

  • Publica black wrap
  • Publica white wrap
  • Publica gray wrap
  • Publica silver wrap
  • Publica red wrap
  • Publica blue wrap
  • Publica green wrap
  • Publica yellow wrap
  • Publica orange wrap
  • Publica purple wrap
  • Publica pink wrap
  • Publica teal wrap
  • Publica brown wrap
  • Publica gold wrap
  • Publica chrome wrap
  • Publica color shift wrap
  • Publica carbon fiber wrap
  • Publica camo and patterned wrap

How much vinyl to wrap a Toyota Publica

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1988sedan (2 doors)143.5 in (3,645 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)
1969–1978coupe (2 doors)138.6 in (3,520 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)
1961–1969coupe (2 doors)138.6 in (3,520 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m)

Publica wrap cost factors

Publica wrap cost varies with the amount of film needed, which is based on the generation and film type. For the third generation sedan, standard cast film requires about 39 ft (12 m), while the coupes need about 36 ft (11 m). Chrome or patterned film adds to the material required. Installer labor for the long side doors and preparation of older paint also affects cost.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: sedan (2 doors).
  • Two long side doors: each door is one large piece of film.

Publica wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Publica, third generation, factory photo
Factory color shown

1969–1988 Publica sedan (third generation)

1969–1988sedan (2 doors)143.5 in (3,645 mm)

The third generation Toyota Publica, produced from 1969 to 1988, is a two-door sedan. Paint age is important on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. The vehicle length is 143.5 in (3,645 mm). A full wrap uses about 39 ft (12 m) of 60-inch cast film.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Toyota Publica, second generation, factory photo
Factory color shown

1969–1978 Publica coupe (second generation)

1969–1978coupe (2 doors)138.6 in (3,520 mm)

The second generation Toyota Publica coupe was built from 1969 to 1978 with body code P30. Its years overlap with the newer body from 1969 to 1978, so the owner of a car from those years checks which body it is. This coupe shares the same length as the first generation at 138.6 in (3,520 mm). It requires about 36 ft (11 m) of film for a standard wrap.

Two long side doors: each door is one large piece of film.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Toyota Publica, first generation, factory photo
Factory color shown

1961–1969 Publica coupe (first generation)

1961–1969coupe (2 doors)138.6 in (3,520 mm)

The first generation Toyota Publica coupe, produced from 1961 to 1969, has a length of 138.6 in (3,520 mm). Its compact size and two-door style mean fewer panels than a four-door car, and each long door takes one large piece of film. A standard wrap uses about 36 ft (11 m) of film. Chrome or patterned film increases the material needed to about 41 ft (12.5 m).

Two long side doors: each door is one large piece of film.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 41 ft (12.5 m).

Roof, hood, chrome delete and PPF on a Publica

Partial wrap options for the Toyota Publica include covering the roof, hood, and mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF), a clear film, can be applied to the front end. These smaller jobs are available on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Publica: body, cut-outs and film

Toyota Publica vinyl wrap work is shaped by the car's compact dimensions and two-door body styles. The third generation sedan measures 143.5 in (3,645 mm) in length, while the earlier coupes are 138.6 in (3,520 mm) long. These small sizes reduce the amount of film compared to larger vehicles. Each side door can be covered with one large piece of film.

Publica wrap ideas should account for the long side doors that dominate the vehicle's profile. Each door is a single panel, so installers can apply one piece of film to avoid seams. The roof and hood are relatively simple flat areas to work with. No unusual cut-outs are required on these bodies.

How much vinyl to wrap a Publica depends on which generation is being covered and its body style. The third generation sedan uses about 39 ft (12 m) of film, while the coupes use about 36 ft (11 m). Whether chrome or patterned film is selected will increase the amount needed. The first and second generation bodies are identical in length but fall under different chassis codes.

Questions about wrapping a Toyota Publica

How much vinyl does it take to wrap a Toyota Publica?

About 39 ft (12 m) of 60-inch (1.52 m) cast film is needed to wrap the newest Toyota Publica body. This estimate applies to a full wrap of the third generation sedan. The first and second generation coupes need slightly less at about 36 ft (11 m).

Can I wrap only the hood or the roof of a Publica?

Yes, you can wrap only the hood or the roof of a Publica. The partial wrap options include the roof, hood, and mirror caps. These smaller jobs are suitable for any generation. They use less film than a full wrap.

Is a Publica hard to wrap?

The Publica is not hard to wrap because of its small size and simple two-door body. The long side doors mean one large piece of film for each door, which reduces seams. The car's compact length, around 138.6 to 143.5 in, means less film to handle. The main added work comes from dealing with older paint on these vehicles.

How many generations of the Publica does this page cover?

This page covers three generations of the Toyota Publica: first generation from 1961 to 1969, second generation from 1969 to 1978, and third generation from 1969 to 1988.