Wraps by car

Toyota Raum wrap

The Toyota Raum wrap page covers both generations of this compact minivan. The second generation was built from 2003 to 2011, and the first generation from 1997 to 2003. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations18 mof film for a full wrap

Toyota Raum, second generation, factory photo
Toyota Raum, second generation. Factory color shown.

Toyota Raum wrap colors and ideas

  • Raum black wrap
  • Raum white wrap
  • Raum gray wrap
  • Raum silver wrap
  • Raum red wrap
  • Raum blue wrap
  • Raum green wrap
  • Raum yellow wrap
  • Raum orange wrap
  • Raum purple wrap
  • Raum pink wrap
  • Raum teal wrap
  • Raum brown wrap
  • Raum gold wrap
  • Raum chrome wrap
  • Raum color shift wrap
  • Raum carbon fiber wrap
  • Raum camo and patterned wrap

How much vinyl to wrap a Toyota Raum

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2011van (5 doors)159.3 in (4,045 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
1997–2003van (5 doors)158.5 in (4,025 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Raum wrap cost factors

Raum wrap cost depends on the film, the coverage, and the condition of the body. Both generations take about 59 ft (18 m) of cast film for a color change wrap. Chrome or patterned film adds length: about 67 ft (20.5 m) on the second generation and about 69 ft (21 m) on the first.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Raum wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Raum, second generation, factory photo
Factory color shown

2003–2011 Raum van (second generation)

2003–2011van (5 doors)159.3 in (4,045 mm)

The second generation Toyota Raum has sliding side doors that shape the wrap. The door tracks stay bare, and the film is cut along them. That leaves the tracks visible while the door panels are covered. Installers trim the film close to the track edge for a clean line.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Toyota Raum, first generation, factory photo
Factory color shown

1997–2003 Raum van (first generation)

1997–2003van (5 doors)158.5 in (4,025 mm)

The first generation Toyota Raum is from 1997 to 2003, so paint age is a factor. Panels may be original or repainted, and a test spot comes before a full wrap. That test shows whether the film will lift old paint or lay flat. The wrap itself follows the same sliding-door process as the later car.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Raum

A partial wrap on a Raum can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end. These jobs use less material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Raum: body, cut-outs and film

A Toyota Raum vinyl wrap works with one body style across both generations: a five-door van. The second generation is 159.3 in (4,045 mm) long, and the first is 158.5 in (4,025 mm). The tall, flat sides make the van straightforward to wrap, but the sliding door tracks need careful cutting.

Raum wrap ideas start with the sliding side doors, because the door tracks stay bare. The film is cut along the tracks, and the doors themselves are wrapped. You can wrap the roof, hood, and mirror caps as a partial job. For a chrome delete, the window trim and badges get black film.

How much vinyl to wrap a Raum depends on the generation and the film type. Both generations need about 59 ft (18 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the second generation needs about 67 ft (20.5 m), while the first needs about 69 ft (21 m).

Questions about wrapping a Toyota Raum

How much vinyl does it take to wrap a Toyota Raum?

A Toyota Raum takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. That figure is for the newest body, the second generation from 2003 to 2011. With chrome or patterned film, plan for about 67 ft (20.5 m).

Are the sliding doors of a Raum wrapped?

Yes, the sliding doors of a Raum are wrapped. The door tracks stay bare, and the film is cut along them. The door panels themselves get film like the rest of the body.

Can I wrap only the hood or the roof of a Raum?

Yes, you can wrap only the hood or the roof of a Raum. A partial wrap also includes jobs like mirror caps. A chrome delete covers window trim and badges, and PPF is clear film on the front end.

Is a Raum hard to wrap?

A Raum is not the hardest van to wrap, but the sliding doors add work. The door tracks stay bare, and the film is cut along them. The body is compact at 159.3 in (4,045 mm) for the second generation, which helps material planning.