Wraps by car

Toyota Sai wrap

The Toyota Sai wrap page covers the first generation, a mid-size sedan produced from 2009 to 2017. A full vinyl wrap of this body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 66 ft (20 m). Only one generation appears in this catalog.

1generations17 mof film for a full wrap

Toyota Sai, first generation, factory photo
Toyota Sai, first generation. Factory color shown.

Toyota Sai wrap colors and ideas

  • Sai black wrap
  • Sai white wrap
  • Sai gray wrap
  • Sai silver wrap
  • Sai red wrap
  • Sai blue wrap
  • Sai green wrap
  • Sai yellow wrap
  • Sai orange wrap
  • Sai purple wrap
  • Sai pink wrap
  • Sai teal wrap
  • Sai brown wrap
  • Sai gold wrap
  • Sai chrome wrap
  • Sai color shift wrap
  • Sai carbon fiber wrap
  • Sai camo and patterned wrap

How much vinyl to wrap a Toyota Sai

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2017sedan (4 doors)181.5 in (4,610 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Sai wrap cost factors

Sai wrap cost depends on the film, the finish and how much of the car gets wrapped. A full color change uses 56 ft (17 m) of cast film, while chrome or patterned film needs 66 ft (20 m). The four doors and the trunk add labor compared to a two-door car. Removing and reinstalling the mirror caps and door handles also changes the quote.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).

Sai wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Sai, first generation, factory photo
Factory color shown

2009–2017 Sai sedan (first generation)

2009–2017sedan (4 doors)181.5 in (4,610 mm)

The first generation Toyota Sai was built from 2009 to 2017, so paint condition varies from car to car. Some panels may be original, while others could have been repainted after damage. A test spot on each panel shows whether the film will lift old paint when removed. The wrap shop checks this before a full wrap.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Sai

A partial wrap on a Sai can cover the roof, the hood or the mirror caps. Chrome delete changes the window trim and badges to black film. Paint protection film (PPF) on the front end is clear film that guards the bumper, hood and fenders. These jobs use less film than a full wrap and cost less in labor.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Sai: body, cut-outs and film

A Toyota Sai vinyl wrap covers a four-door sedan with a length of 181.5 in (4,610 mm). The four doors and the trunk lid add cut lines and seams that a smaller car does not have. The mid-size body needs more film than a compact, but the roof is straightforward to wrap in one piece. The rear bumper wraps around the corners, so plan a seam or stretch the film carefully.

Sai wrap ideas include cut-outs for the door handles, the antenna base and the badges. The mirror caps come off for a cleaner edge, and the door handles are removed before the film goes on. The chrome trim around the windows can stay on the car and get wrapped in black film. The front bumper has fog light openings that need relief cuts.

How much vinyl to wrap a Sai depends on body changes across years. All years share the same sedan shell, so the same film estimate of 56 ft (17 m) applies to every 2009–2017 car. Some trims add a lip spoiler on the trunk, which needs a small extra piece. A wrap shop measures the car before cutting because a sunroof or a rear wiper changes the layout.

Questions about wrapping a Toyota Sai

How much vinyl does it take to wrap a Toyota Sai?

A full wrap of a Toyota Sai takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 66 ft (20 m) because the pattern repeat wastes more material. The estimate covers the sedan body from 2009 to 2017.

Can I wrap only the hood or the roof of a Sai?

Yes, you can wrap only the hood or the roof of a Sai. These partial wraps use less film and take less time than a full wrap. A shop can also wrap just the mirror caps or do a chrome delete on the window trim.

Is a Sai hard to wrap?

A Sai adds work because of its four doors and its mid-size length of 181.5 in (4,610 mm). The door handles and mirror caps are removed for clean cuts, and the bumpers need relief cuts. The body has no deep curves, so the panels are flat and simple to wrap.

How many generations of the Sai does this page cover?

This page covers one generation of the Toyota Sai. The first generation ran from 2009 to 2017 as a four-door sedan. No other generations are in this catalog.