Wraps by car

Toyota Sequoia wrap

This page covers the Toyota Sequoia vinyl wrap for all three generations of the full-size SUV. The newest body is the third generation, produced from 2022 onward. A complete wrap of a third-generation Sequoia takes about 69 ft (21 m) of 60-inch (1.52 m) cast film.

3generations

Toyota Sequoia, third generation, factory photo
Toyota Sequoia, third generation. Factory color shown.

Toyota Sequoia wrap colors and ideas

  • Sequoia black wrap
  • Sequoia white wrap
  • Sequoia gray wrap
  • Sequoia silver wrap
  • Sequoia red wrap
  • Sequoia blue wrap
  • Sequoia green wrap
  • Sequoia yellow wrap
  • Sequoia orange wrap
  • Sequoia purple wrap
  • Sequoia pink wrap
  • Sequoia teal wrap
  • Sequoia brown wrap
  • Sequoia gold wrap
  • Sequoia chrome wrap
  • Sequoia color shift wrap
  • Sequoia carbon fiber wrap
  • Sequoia camo and patterned wrap

How much vinyl to wrap a Toyota Sequoia

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)——
2007–2022SUV (5 doors)205.1 in (5,210 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m)
2000–2007SUV (5 doors)203.9 in (5,179 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Sequoia wrap cost factors

Sequoia wrap cost is driven by the size of the panels and the detail work on this full-size SUV. The vehicle needs about 69 ft (21 m) of film for the newest body, and chrome or patterned film pushes that estimate to about 89 ft (27 m) on the second generation. Removing door handles, mirrors and badges adds labor time, as does wrapping the roof from a platform on the later models.

  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Sequoia wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Sequoia, third generation, factory photo
Factory color shown

2022–now Sequoia SUV (third generation)

2022–nowSUV (5 doors)

The third-generation Toyota Sequoia is a full-size SUV with a length similar to the first generation, but its panel count is the same. The five-door body means the hood, roof, two bumpers and all six side panels are wrapped separately. The tailgate has the rear glass built in, so the film stops at the glass edge and there is no separate liftgate panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Toyota Sequoia, second generation, factory photo
Factory color shown

2007–2022 Sequoia SUV (second generation)

2007–2022SUV (5 doors)205.1 in (5,210 mm)

The second-generation Sequoia was restyled in 2017, and that changed the front and rear bumpers and the lights. Film cut for a 2007–2016 bumper will not match the shape of a 2017–2022 bumper, and the same is true for the headlight and taillight openings. When you order pre-cut pieces, always check the production date of your Sequoia, not just the generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.6 in (1,895 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).

Toyota Sequoia, first generation, factory photo
Factory color shown

2000–2007 Sequoia SUV (first generation)

2000–2007SUV (5 doors)203.9 in (5,179 mm)

The first-generation Sequoia was made from 2000 to 2007, so paint age varies widely on these vehicles. Some panels may still have original paint, while others could be repainted with different levels of adhesion. A reliable shop will do a test spot on each large panel to check how the film releases before a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (73.2 in (1,859 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Sequoia

A partial wrap on a Sequoia can cover the hood, the roof or the mirror caps without wrapping the whole vehicle. A chrome delete changes the window trim and badges to black film and is a smaller job than a color change wrap. Paint protection film (PPF) is also an option for the front end, where clear film guards against stone chips without hiding the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Sequoia: body, cut-outs and film

The Toyota Sequoia vinyl wrap starts with a large five-door body that adds many panels to the job. Every generation measures over 200 inches long, so the roof, hood and tall sides use wide rolls of film. The tailgate includes the rear glass, which shortens the panel but still needs careful trimming around the edges.

Sequoia wrap ideas have to work around the tailgate design, where the film ends at the edge of the rear glass. The roof is also high on the second and third generations, so an installer wraps it from a platform rather than a ladder. Cut-outs are needed for door handles, badges, lights and the fuel filler, and the door mirrors are best removed for cleaner edges.

How much vinyl to wrap a Sequoia depends on the generation you own. The first-generation model is 203.9 in (5,179 mm) long and uses about 69 ft (21 m) of standard cast film. The second generation is slightly longer at 205.1 in (5,210 mm) and takes the same amount of film for a plain color wrap.

Questions about wrapping a Toyota Sequoia

How much vinyl does it take to wrap a Toyota Sequoia?

Yes, a full wrap of the newest Toyota Sequoia takes about 69 ft (21 m) of 60-inch (1.52 m) cast film. A chrome or patterned film needs about 89 ft (27 m) on the second generation because the pattern repeat wastes more material.

Can I wrap only the hood or the roof of a Sequoia?

Yes, a partial wrap on a Sequoia can cover just the hood, the roof or the mirror caps. A chrome delete on the window trim and badges is another small job that changes the look without wrapping the whole body.

Is a Sequoia hard to wrap?

The Sequoia is not hard to wrap for an experienced installer, but it adds work with its tall roof and tailgate glass. The roof of the second and third generations requires a platform because the body stands over 73 inches high. The tailgate also needs careful cutting where the film meets the rear glass.

How many generations of the Sequoia does this page cover?

This page covers three generations of the Toyota Sequoia. The first generation ran from 2000 to 2007, the second from 2007 to 2022, and the third began in 2022 and continues now.