Wraps by car

Toyota Sera wrap

The Toyota Sera wrap page covers the 1990–1995 coupe, its single generation, and the film a full wrap of this body takes. A full color change wrap on a Toyota Sera needs about 39 ft (12 m) of 60-inch (1.52 m) cast vinyl wrap. Chrome or patterned film requires about 48 ft (14.5 m) for the same car.

1generations12 mof film for a full wrap

Toyota Sera, first generation, factory photo
Toyota Sera, first generation. Factory color shown.

Toyota Sera wrap colors and ideas

  • Sera black wrap
  • Sera white wrap
  • Sera gray wrap
  • Sera silver wrap
  • Sera red wrap
  • Sera blue wrap
  • Sera green wrap
  • Sera yellow wrap
  • Sera orange wrap
  • Sera purple wrap
  • Sera pink wrap
  • Sera teal wrap
  • Sera brown wrap
  • Sera gold wrap
  • Sera chrome wrap
  • Sera color shift wrap
  • Sera carbon fiber wrap
  • Sera camo and patterned wrap

How much vinyl to wrap a Toyota Sera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1995coupe (2 doors)152.0 in (3,860 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Sera wrap cost factors

Sera wrap cost depends on the film type and the state of the body on this 1990–1995 coupe. More film is needed for chrome or patterned vinyl, about 48 ft (14.5 m), than for a single-color wrap, about 39 ft (12 m). Panel condition matters too, because paint flaws show through film and need repair before wrapping.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Sera wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Sera, first generation, factory photo
Factory color shown

1990–1995 Sera coupe (first generation)

1990–1995coupe (2 doors)152.0 in (3,860 mm)

The first generation Toyota Sera, built from 1990 to 1995, may have original or repainted panels by now. Paint age matters before a full wrap, so a test spot on each panel checks adhesion and finish. A test spot also shows whether old paint lifts when film is repositioned.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Sera

A partial wrap on a Toyota Sera can cover the roof, hood or mirror caps as separate jobs. Sera chrome delete covers the window trim and badges with black film, which suits the car's glassy top half. Paint protection film (PPF) is a clear film for the front end, often the hood, bumper and mirror caps.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Sera: body, cut-outs and film

A Toyota Sera vinyl wrap works with one compact coupe shape, 152.0 in (3,860 mm) long with two doors. The smooth body sides and curved glass canopy mean most panels are large and clean for film. The wrap has fewer separate pieces than a four-door sedan, which makes layout easier on this car.

Sera wrap ideas begin with the two long side doors: each door is one large piece of film that needs two installers to handle. The door handles, mirror caps and badges come off for a neat edge. The glass roof panels and fixed rear window get film cut around them, not over them.

How much vinyl to wrap a Sera stays the same across its one generation, because the coupe body did not change size from 1990 to 1995. A color change wrap uses about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 48 ft (14.5 m) to match patterns and finish edges.

Questions about wrapping a Toyota Sera

How much vinyl does it take to wrap a Toyota Sera?

A Toyota Sera needs about 39 ft (12 m) of 60-inch (1.52 m) cast film for a full color change wrap. Chrome or patterned film needs about 48 ft (14.5 m) to match patterns and finish edges on this coupe.

Can I wrap only the hood or the roof of a Sera?

Yes, you can wrap only the hood or the roof of a Sera as a partial wrap. The roof and hood are flat enough to cover with one or two pieces of film each. Mirror caps are another small job that changes the look without a full wrap.

Is a Sera hard to wrap?

A Sera adds work because of its two long side doors, each one large piece of film that needs two people. The compact length of 152.0 in (3,860 mm) keeps the roof and hood simple, but the door size is the main challenge. The glass canopy also means cut-outs around fixed windows take extra time.

How many generations of the Sera does this page cover?

This page covers one generation of the Toyota Sera, the 1990–1995 coupe.