Wraps by car

Toyota Sienna wrap

The Toyota Sienna wrap page covers all four generations of this minivan, from 1997 to the current model. A full vinyl wrap of the newest fourth-generation body takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film. The first-generation Sienna is the shortest at 193.5 in (4,915 mm), while the current model is the longest at 203.7 in (5,174 mm).

4generations23.5 mof film for a full wrap

Toyota Sienna, fourth generation, factory photo
Toyota Sienna, fourth generation. Factory color shown.

Toyota Sienna wrap colors and ideas

  • Sienna black wrap
  • Sienna white wrap
  • Sienna gray wrap
  • Sienna silver wrap
  • Sienna red wrap
  • Sienna blue wrap
  • Sienna green wrap
  • Sienna yellow wrap
  • Sienna orange wrap
  • Sienna purple wrap
  • Sienna pink wrap
  • Sienna teal wrap
  • Sienna brown wrap
  • Sienna gold wrap
  • Sienna chrome wrap
  • Sienna color shift wrap
  • Sienna carbon fiber wrap
  • Sienna camo and patterned wrap

How much vinyl to wrap a Toyota Sienna

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowvan (5 doors)203.7 in (5,174 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
2010–2021van (5 doors)200.2 in (5,085 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
2003–2009van (5 doors)199.2 in (5,060 mm) to 201.0 in (5,105 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)
1997–2003van (5 doors)193.5 in (4,915 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

Sienna wrap cost factors

Sienna wrap cost depends on the size of the van, the film choice, and the amount of preparation work. The current model is 203.7 in (5,174 mm) long and needs about 77 ft (23.5 m) of film, so material volume is a key factor. Wraps on older generations may require extra cleaning and paint correction before installation. The complexity of cut-outs around sensors, cameras, and roof rails also affects the labor involved.

  • Film for a full wrap: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Sienna wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Sienna, fourth generation, factory photo
Factory color shown

2020–now Sienna van (fourth generation)

2020–nowvan (5 doors)203.7 in (5,174 mm)

The fourth-generation Sienna has sliding side doors that influence how the vinyl wrap is installed. The door tracks stay bare, and the film is cut along them to allow the doors to open and close without interference. This generation measures 203.7 in (5,174 mm) in length and is the largest Sienna body. A full wrap uses about 77 ft (23.5 m) of 60-inch (1.52 m) cast film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Toyota Sienna, third generation, factory photo
Factory color shown

2010–2021 Sienna van (third generation)

2010–2021van (5 doors)200.2 in (5,085 mm)

The third-generation Sienna may have a panoramic glass roof on some trims, which affects the vinyl wrap. Glass is not wrapped, so the roof stays dark regardless of the film color chosen for the rest of the vehicle. The film ends at the roof rails, and the edges are finished cleanly along the glass. This generation also has a tall body height of 68.9 in (1,750 mm), requiring a platform for roof installation.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Toyota Sienna, second generation, factory photo
Factory color shown

2003–2009 Sienna van (second generation)

2003–2009van (5 doors)199.2 in (5,060 mm) to 201.0 in (5,105 mm)

The second-generation Sienna received a restyling in 2006 that changed the bumpers and lights. Vinyl wrap patterns cut for the pre-2006 version do not fit the post-2006 version, so installers must verify the production year. Both versions share the same sliding door track design that keeps the tracks bare. This generation ranges from 199.2 in (5,060 mm) to 201.0 in (5,105 mm) in length.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (68.9 in (1,750 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Toyota Sienna, first generation, factory photo
Factory color shown

1997–2003 Sienna van (first generation)

1997–2003van (5 doors)193.5 in (4,915 mm)

The first-generation Sienna is now over 20 years old, and paint age is a major factor for wrapping. Panels may be original or repainted, and a test spot should be done before a full wrap to check adhesion. This generation is 193.5 in (4,915 mm) long and needs about 72 ft (22 m) of cast film. The sliding door tracks are bare, and the film is cut along them as on all Sienna models.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on a Sienna

A partial wrap on a Toyota Sienna can include the roof, hood, and mirror caps instead of the full body. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) as a clear film on the front end protects the bumper, hood, and fenders from stone chips. These options are suited to owners who want a smaller change or extra protection without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Sienna: body, cut-outs and film

A Toyota Sienna vinyl wrap covers a large five-door van body that varies in length across generations. The current model measures 203.7 in (5,174 mm), and the first generation is 193.5 in (4,915 mm). These dimensions mean a full wrap uses between 72 ft (22 m) and 77 ft (23.5 m) of 60-inch (1.52 m) material. The tall body height of 68.9 in (1,750 mm) on the second and third generations requires wrapping the roof from a platform.

Sienna wrap ideas must account for the sliding side doors on every generation. The door tracks stay bare, and the film is cut along them so the doors can still slide. On some third-generation trims, a panoramic glass roof is not wrapped, and the film ends at the roof rails. Additional cut-outs may be needed for parking sensors, cameras, fog lamps, and a sunroof on some trims.

How much vinyl to wrap a Sienna depends on the generation and the film type. The fourth generation needs about 77 ft (23.5 m) of 60-inch (1.52 m) cast film, while the first generation needs about 72 ft (22 m). Chrome or patterned film requires more material: about 90 ft (27.5 m) for the second through fourth generations and about 84 ft (25.5 m) for the first generation. These figures are for a full color change wrap of the exterior.

Questions about wrapping a Toyota Sienna

How much vinyl does it take to wrap a Toyota Sienna?

It takes about 77 ft (23.5 m) of 60-inch (1.52 m) cast film to wrap a Toyota Sienna of the current fourth generation. This figure is for a full color change wrap of the entire exterior, including the roof and bumpers. Chrome or patterned film requires more material, about 90 ft (27.5 m). The first generation is smaller and needs about 72 ft (22 m).

Are the sliding doors of a Sienna wrapped?

Yes, the sliding doors of a Sienna are wrapped, but the door tracks stay bare. The film is cut along the tracks so the doors can slide open and closed without catching or peeling. This applies to every generation from 1997 to the current model. The tracks themselves are not covered with film.

Can I wrap only the hood or the roof of a Sienna?

Yes, you can wrap only the hood or the roof of a Sienna as a partial wrap. A partial wrap can also include the mirror caps for a coordinated look. A chrome delete of the window trim and badges is another small-scale option. Clear paint protection film (PPF) on the front end is available for protection without changing the color.

Is a Sienna hard to wrap?

A Sienna is not the most difficult vehicle to wrap, but its size and sliding doors add work. The body length ranges from 193.5 in (4,915 mm) to 203.7 in (5,174 mm), so installers need enough space and material. The sliding door tracks require precise cutting to keep the film from interfering with door operation. On some trims, cut-outs are needed for parking sensors, cameras, and a sunroof, which adds time to the installation.