Wraps by car

Toyota Sienta wrap

This page covers wrapping the Toyota Sienta, a compact minivan sold in two generations in the catalog. The newest body is the second generation from 2015 to 2018, and a full wrap of that body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the same wrap takes about 72 ft (22 m). These figures are the starting point for planning a vinyl wrap on this car.

2generations18.5 mof film for a full wrap

Toyota Sienta, second generation, factory photo
Toyota Sienta, second generation. Factory color shown.

Toyota Sienta wrap colors and ideas

  • Sienta black wrap
  • Sienta white wrap
  • Sienta gray wrap
  • Sienta silver wrap
  • Sienta red wrap
  • Sienta blue wrap
  • Sienta green wrap
  • Sienta yellow wrap
  • Sienta orange wrap
  • Sienta purple wrap
  • Sienta pink wrap
  • Sienta teal wrap
  • Sienta brown wrap
  • Sienta gold wrap
  • Sienta chrome wrap
  • Sienta color shift wrap
  • Sienta carbon fiber wrap
  • Sienta camo and patterned wrap

How much vinyl to wrap a Toyota Sienta

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2018van (5 doors)166.7 in (4,235 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2003–2015van (5 doors)161.4 in (4,100 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Sienta wrap cost factors

Sienta wrap cost depends on the film area, the film type, and the number of cut-outs and removals. A full wrap of either generation needs about 61 ft (18.5 m) of cast film, and chrome or patterned film needs about 70 to 72 ft (21.5 to 22 m). The sliding door tracks add trimming time, and the five doors mean more edges to tuck. A partial wrap costs less because it uses less film and fewer work hours.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Sienta wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Sienta, second generation, factory photo
Factory color shown

2015–2018 Sienta van (second generation)

2015–2018van (5 doors)166.7 in (4,235 mm)

The second generation Toyota Sienta has sliding side doors where the tracks stay bare and decide where the film is cut. The installer leaves the track area unwrapped and trims the film along the track edges. This keeps the doors opening and closing without catching the vinyl. The rest of the door panel is wrapped as one piece up to the track line.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Toyota Sienta, first generation, factory photo
Factory color shown

2003–2015 Sienta van (first generation)

2003–2015van (5 doors)161.4 in (4,100 mm)

On the first generation Toyota Sienta, paint age is a real factor before wrapping. These cars were built from 2003 to 2015, and panels may be original or repainted, so a test spot comes before a full wrap. Old paint can lift when film is removed, and repainted panels may hold film differently. The installer checks adhesion on a small area first and adjusts the film or the prep work.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Sienta

Partial wrap options for the Toyota Sienta include the roof, hood, and mirror caps as separate jobs. A chrome delete covers window trim and badges with black film, which changes the look without wrapping the whole van. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done on either generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Sienta: body, cut-outs and film

A Toyota Sienta vinyl wrap has to handle five doors and two sliding side doors on a short minivan body. The second generation is 166.7 in (4,235 mm) long and the first generation is 161.4 in (4,100 mm) long, so both are compact. The sliding doors add vertical seams and long tracks, but the roof and hood are easy to reach. A full wrap uses one continuous sheet for the roof and separate pieces for each panel.

Sienta wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. The installer trims the film at the track edges so the doors still slide freely. Badges, door handles, and the fuel filler flap are removed or cut out for a clean edge. Mirror caps and the rear spoiler, if fitted, are wrapped as separate pieces.

How much vinyl to wrap a Sienta depends mainly on the generation, not on the trim level. Both generations use about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full color change wrap. The second generation needs slightly more film for chrome or patterned work, at about 72 ft (22 m) versus 70 ft (21.5 m) on the first generation. The second generation is 5.3 in (135 mm) longer, which adds a little material on the lower panels.

Questions about wrapping a Toyota Sienta

How much vinyl does it take to wrap a Toyota Sienta?

A full wrap of a Toyota Sienta takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film on the newest body. For chrome or patterned film, plan for about 72 ft (22 m). These figures cover all exterior painted panels on the second generation van.

Are the sliding doors of a Sienta wrapped?

Yes, the sliding doors of a Sienta are wrapped, but the door tracks stay bare. The film is cut along the track edges so the doors slide without rubbing. This is the standard way to wrap any van with sliding side doors.

Can I wrap only the hood or the roof of a Sienta?

Yes, you can wrap only the hood or the roof of a Sienta. A partial wrap on this car often covers the roof, hood, and mirror caps separately. These smaller jobs use less film and take less time than a full wrap.

Is a Sienta hard to wrap?

A Sienta is moderately hard to wrap because of its sliding side doors and the need to cut around the door tracks. The two generations are 161.4 in (4,100 mm) and 166.7 in (4,235 mm) long, so the panels are manageable. The tracks add trimming work, and the five doors mean more edges to tuck, but the flat sides and roof are straightforward.