Wraps by car

Toyota Soarer wrap

The Toyota Soarer wrap covers four generations from 1981 to 2005. The newest body is the fourth generation, a convertible built from 2001 to 2005. A full wrap of that car takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl wrap. More film is needed for chrome or patterned material.

4generations14.5 mof film for a full wrap

Toyota Soarer, fourth generation, factory photo
Toyota Soarer, fourth generation. Factory color shown.

Toyota Soarer wrap colors and ideas

  • Soarer black wrap
  • Soarer white wrap
  • Soarer gray wrap
  • Soarer silver wrap
  • Soarer red wrap
  • Soarer blue wrap
  • Soarer green wrap
  • Soarer yellow wrap
  • Soarer orange wrap
  • Soarer purple wrap
  • Soarer pink wrap
  • Soarer teal wrap
  • Soarer brown wrap
  • Soarer gold wrap
  • Soarer chrome wrap
  • Soarer color shift wrap
  • Soarer carbon fiber wrap
  • Soarer camo and patterned wrap

How much vinyl to wrap a Toyota Soarer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2005convertible (2 doors)177.8 in (4,515 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1991–2001coupe (2 doors)191.3 in (4,860 mm) to 192.9 in (4,900 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
1986–1991coupe (2 doors)184.1 in (4,675 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1981–1985coupe (2 doors)183.3 in (4,655 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Soarer wrap cost factors

The Soarer wrap cost depends on the size and the film. The third generation is the longest body, so it needs about 51 ft (15.5 m) of standard film. Chrome or patterned film raises the amount to about 66 ft (20 m). The convertible also adds work around the top.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Soarer wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Soarer, fourth generation, factory photo
Factory color shown

2001–2005 Soarer convertible (fourth generation)

2001–2005convertible (2 doors)177.8 in (4,515 mm)

On the fourth generation Soarer, the open top is not wrapped. The fabric top is left as it is, and the film ends where the top begins. A folding hard top is wrapped as panels of its own. This keeps the wrap clean at the edges of the convertible body.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Toyota Soarer, third generation, factory photo
Factory color shown

1991–2001 Soarer coupe (third generation)

1991–2001coupe (2 doors)191.3 in (4,860 mm) to 192.9 in (4,900 mm)

The third generation Soarer was restyled in 1994. The bumpers and lights changed, so film cut for one version does not fit the other. Check the production year before ordering a kit. The body length also varies between 191.3 in (4,860 mm) and 192.9 in (4,900 mm).

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Toyota Soarer, second generation, factory photo
Factory color shown

1986–1991 Soarer coupe (second generation)

1986–1991coupe (2 doors)184.1 in (4,675 mm)

Paint age matters on a second generation Soarer from 1986 to 1991. Panels may be original or repainted, and a test spot comes before a full wrap. This shows if the film will stick well to the old paint. The body is 184.1 in (4,675 mm) long.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Toyota Soarer, first generation, factory photo
Factory color shown

1981–1985 Soarer coupe (first generation)

1981–1985coupe (2 doors)183.3 in (4,655 mm)

The first generation Soarer from 1981 to 1985 is a mid-size coupe. Its size of 183.3 in (4,655 mm) means about 49 ft (15 m) of film for a full wrap. The two long side doors are each one large piece. Chrome or patterned film increases the amount to about 62 ft (19 m).

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Soarer

A partial wrap on a Soarer can cover the hood, mirror caps, or rear deck. Soarer chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film on the front end. These jobs use less material than a full wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Soarer: body, cut-outs and film

The Toyota Soarer vinyl wrap follows the car's coupe and convertible body styles. The longest version is the third generation at up to 192.9 in (4,900 mm). Most generations are coupes with two long side doors. The fourth generation is a convertible, so the film ends where the fabric top begins.

Soarer wrap ideas start with the long side doors, which are each one large piece of film. On the convertible, the fabric top is not wrapped and the film ends where the top begins. A folding hard top is wrapped as panels of its own. Chrome delete can cover window trim and badges with black film.

To know how much vinyl to wrap a Soarer, compare the generations. The third generation body changed in 1994, with different bumpers and lights. Film cut for one version does not fit the other. The first and second generations are close in size, around 183–184 in (4,655–4,675 mm).

Questions about wrapping a Toyota Soarer

How much vinyl does it take to wrap a Toyota Soarer?

A Toyota Soarer takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. Chrome or patterned film needs about 54 ft (16.5 m). This figure is for the fourth generation convertible.

Is the top of a Soarer wrapped?

The top of a Soarer is not wrapped if it is a fabric convertible top. The film ends where the fabric begins. A folding hard top is wrapped as separate panels.

Can I wrap only the hood or the roof of a Soarer?

Yes, you can wrap only the hood or the roof of a Soarer. A partial wrap often covers the hood, mirror caps, or rear deck. These smaller jobs use less film than a full wrap.

Is a Soarer hard to wrap?

A Soarer is not hard to wrap, but its long doors and size add work. Each side door is one large piece of film. The third generation is up to 192.9 in (4,900 mm) long, so you need more material.