Wraps by car

Toyota Sprinter Marino wrap

The Toyota Sprinter Marino wrap page covers the single generation produced from 1992 to 1997. This compact sedan has four doors and was sold as the E100 series. A complete vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan on about 56 ft (17 m).

1generations15 mof film for a full wrap

Toyota Sprinter Marino, first generation, factory photo
Toyota Sprinter Marino, first generation. Factory color shown.

Toyota Sprinter Marino wrap colors and ideas

  • Sprinter Marino black wrap
  • Sprinter Marino white wrap
  • Sprinter Marino gray wrap
  • Sprinter Marino silver wrap
  • Sprinter Marino red wrap
  • Sprinter Marino blue wrap
  • Sprinter Marino green wrap
  • Sprinter Marino yellow wrap
  • Sprinter Marino orange wrap
  • Sprinter Marino purple wrap
  • Sprinter Marino pink wrap
  • Sprinter Marino teal wrap
  • Sprinter Marino brown wrap
  • Sprinter Marino gold wrap
  • Sprinter Marino chrome wrap
  • Sprinter Marino color shift wrap
  • Sprinter Marino carbon fiber wrap
  • Sprinter Marino camo and patterned wrap

How much vinyl to wrap a Toyota Sprinter Marino

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1997sedan (4 doors)172.6 in (4,385 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Sprinter Marino wrap cost factors

Sprinter Marino wrap cost depends first on the size of the car, a compact sedan 172.6 in (4,385 mm) long. The amount and type of film matter most: a full wrap takes about 49 ft (15 m) of cast film, and chrome or patterned film needs about 56 ft (17 m). Removing the door handles, badges, and mirror caps adds labor time. Paint condition also affects cost, because panels may be original or repainted on a car of these years.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: sedan (4 doors).

Sprinter Marino wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Sprinter Marino, first generation, factory photo
Factory color shown

1992–1997 Sprinter Marino sedan (first generation)

1992–1997sedan (4 doors)172.6 in (4,385 mm)

The first generation of the Toyota Sprinter Marino was produced from 1992 to 1997 as a four-door sedan. On a car of these years, paint age is a key concern: panels may be original or repainted. A wrap installer checks paint adhesion with a test spot before a full wrap is started. The E100 body code identifies this generation.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Sprinter Marino

For the Sprinter Marino, a partial wrap can cover the roof, the hood, or the mirror caps. A chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Sprinter Marino: body, cut-outs and film

A Toyota Sprinter Marino vinyl wrap has one body style to work with: a four-door sedan. The car is 172.6 in (4,385 mm) long, a compact footprint that keeps material needs modest. The four doors and flat roof line make film application straightforward for an installer. No two-door or wagon option exists for this model.

Sprinter Marino wrap ideas start with the trim around the side windows and the door handles. The side mirrors are wrapped off the car for a clean edge, and the door handles are removed for full coverage. The front and rear bumpers need relief cuts around the fog light openings and the license plate recess. Badges are taken off before wrapping and are replaced with new adhesive.

To figure how much vinyl to wrap a Sprinter Marino, the single generation keeps the math simple. All E100 sedans share one body shell, so panel sizes stay the same. A full wrap follows the estimate of about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds waste, so budget about 56 ft (17 m) for those materials.

Questions about wrapping a Toyota Sprinter Marino

How much vinyl does it take to wrap a Toyota Sprinter Marino?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Toyota Sprinter Marino. With chrome or patterned film, plan on about 56 ft (17 m) because of extra waste from pattern matching.

Can I wrap only the hood or the roof of a Sprinter Marino?

Yes, you can wrap only the hood or the roof of a Sprinter Marino. The car also suits a partial wrap on the mirror caps, a chrome delete on the window trim and badges, or clear paint protection film on the front end.

Is a Sprinter Marino hard to wrap?

A Sprinter Marino is not especially hard to wrap, but it has some steps that add work. The side mirror caps, door handles, and badges need to be removed for a clean result. The body is a compact 172.6 in (4,385 mm) long, so the panels are manageable in size.

How many generations of the Sprinter Marino does this page cover?

This page covers one generation of the Toyota Sprinter Marino. That generation was produced from 1992 to 1997 and is the only one in the catalog.