Wraps by car

Toyota Sprinter wrap

A Toyota Sprinter wrap covers four generations of this compact sedan and wagon line, from the fifth generation of 1983–1987 through the eighth generation of 1995–2000. The newest body in this catalog is the eighth-generation E110 sedan, which measures 169.7 in (4,310 mm) in length. A full color change wrap of that sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl wrap.

4generations14.5 mof film for a full wrap

Toyota Sprinter, eighth generation, factory photo
Toyota Sprinter, eighth generation. Factory color shown.

Toyota Sprinter wrap colors and ideas

  • Sprinter black wrap
  • Sprinter white wrap
  • Sprinter gray wrap
  • Sprinter silver wrap
  • Sprinter red wrap
  • Sprinter blue wrap
  • Sprinter green wrap
  • Sprinter yellow wrap
  • Sprinter orange wrap
  • Sprinter purple wrap
  • Sprinter pink wrap
  • Sprinter teal wrap
  • Sprinter brown wrap
  • Sprinter gold wrap
  • Sprinter chrome wrap
  • Sprinter color shift wrap
  • Sprinter carbon fiber wrap
  • Sprinter camo and patterned wrap

How much vinyl to wrap a Toyota Sprinter

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1995–2000sedan (4 doors)169.7 in (4,310 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1991–2002sedan, wagon (4 or 5 doors)167.9 in (4,265 mm) to 168.9 in (4,290 mm)about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1987–1991sedan (4 doors)165.9 in (4,215 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1983–1987hatchback, sedan (4 or 5 doors)163.6 in (4,155 mm)about 46 ft (14 m) for the sedan to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Sprinter wrap cost factors

Sprinter wrap cost depends on the size of the body, the amount of film, and the hours of labor. A full wrap of an eighth-generation sedan uses about 48 ft (14.5 m) of film, while a fifth-generation hatchback uses up to 48 ft (14.5 m) and the seventh-generation wagon up to 51 ft (15.5 m). A chrome or patterned film adds material, and a two-tone design with cut lines adds labor. The final price is set by the installer after measuring your car and choosing the film.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: sedan (4 doors).

Sprinter wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Sprinter, eighth generation, factory photo
Factory color shown

1995–2000 Sprinter sedan (eighth generation)

1995–2000sedan (4 doors)169.7 in (4,310 mm)

The eighth-generation Toyota Sprinter of 1995–2000 is a four-door sedan, and its paint age is the first thing to check before a wrap. On a car of these years the panels may be original or repainted, and film can lift old or failed paint. A test spot on a small area comes before a full wrap to confirm the film will bond to the surface. Any rust or peeling clearcoat should be corrected before the wrap.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Toyota Sprinter, seventh generation, factory photo
Factory color shown

1991–2002 Sprinter sedan, wagon (seventh generation)

1991–2002sedan, wagon (4 or 5 doors)167.9 in (4,265 mm) to 168.9 in (4,290 mm)

The seventh-generation Toyota Sprinter of 1991–2002 covers sedan and wagon bodies, but its production years overlap with the newer eighth generation. A Sprinter from 1995 to 2000 could be either a seventh-generation E100 or an eighth-generation E110, so the owner must check which body it is. The seventh-generation wagon has a tailgate with the rear glass in it, and the film ends at the edge of the glass. The sedan is shorter at 167.9 in (4,265 mm) and uses less film than the wagon.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Toyota Sprinter, sixth generation, factory photo
Factory color shown

1987–1991 Sprinter sedan (sixth generation)

1987–1991sedan (4 doors)165.9 in (4,215 mm)

The sixth-generation Toyota Sprinter of 1987–1991 is a four-door sedan, and its size and body style set the film amount and panel count. At 165.9 in (4,215 mm) long, this body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full color change. The sedan shape means two doors per side, a trunk lid, roof, and four main panels on each side, plus bumper and rocker pieces. No rear glass in a tailgate is involved, so there are fewer cut-outs than on a hatchback or wagon.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Toyota Sprinter, fifth generation, factory photo
Factory color shown

1983–1987 Sprinter hatchback, sedan (fifth generation)

1983–1987hatchback, sedan (4 or 5 doors)163.6 in (4,155 mm)

The fifth-generation Toyota Sprinter of 1983–1987 came as a hatchback and a sedan, and the body style decides the panel plan and the film amount. The sedan uses about 46 ft (14 m) of film, while the hatchback uses about 48 ft (14.5 m). The hatchback has a tailgate with the rear glass in it, so the film ends at the edge of the glass and uses more material around that area. The sedan has a separate trunk and no glass cut-out on the rear panel.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the sedan to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Sprinter

A partial wrap on a Toyota Sprinter can cover the roof, hood, or mirror caps, and it uses less film than a full wrap. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller Sprinter chrome delete jobs are done without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Sprinter: body, cut-outs and film

The Toyota Sprinter vinyl wrap is shaped by the car's compact size and four-door body styles. Eighth-generation sedans at 169.7 in (4,310 mm) long use about 48 ft (14.5 m) of film, while the shorter fifth-generation hatchback at 163.6 in (4,155 mm) needs about 46 ft (14 m) to 48 ft (14.5 m). A wagon, offered only in the seventh generation, adds a large tailgate and uses up to 51 ft (15.5 m).

Sprinter wrap ideas must account for the rear tailgate on the fifth- and seventh-generation hatchback and wagon bodies. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Sedans of every generation have a conventional trunk lid with no glass cut-out. Color change wrap on any body also means cutting around door handles, mirrors, and badges.

How much vinyl to wrap a Sprinter depends on the generation, and the changes are clear between bodies. The fifth-generation sedan uses about 46 ft (14 m), but its hatchback uses 48 ft (14.5 m), and the seventh-generation wagon is the longest at 51 ft (15.5 m). The eighth generation returns to a sedan only and needs 48 ft (14.5 m). Chrome or patterned film always adds waste, up to 59 ft (18 m) or more.

Questions about wrapping a Toyota Sprinter

How much vinyl does it take to wrap a Toyota Sprinter?

A Toyota Sprinter takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl wrap for a full color change on the newest body in this catalog, the eighth-generation sedan. Chrome or patterned film adds about 59 ft (18 m) because of the extra waste from matching the pattern.

Can I wrap only the hood or the roof of a Sprinter?

Yes, you can wrap only the hood or the roof of a Sprinter. A partial wrap can cover the roof, hood, or mirror caps, and a chrome delete covers window trim and badges.

Is a Sprinter hard to wrap?

A Sprinter is not hard to wrap, but the tailgate on hatchback and wagon bodies adds work. On the fifth- and seventh-generation cars, the rear glass is set into the tailgate, so the film ends at the edge of the glass. The compact size of the car, as short as 163.6 in (4,155 mm), means fewer square feet to wrap than a larger sedan.

How many generations of the Sprinter does this page cover?

This page covers four generations of the Toyota Sprinter: the fifth generation of 1983–1987, the sixth of 1987–1991, the seventh of 1991–2002, and the eighth of 1995–2000.