Wraps by car

Toyota Supra wrap

This page is a guide to Toyota Supra wrap, covering five generations of the sports car. The newest body, the fifth generation from 2018 onward, needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full color change. A full wrap with chrome or patterned film takes about 54 ft (16.5 m) because matching adds waste. Use the film estimates below to plan material for any Supra generation.

5generations14.5 mof film for a full wrap

Toyota Supra, fifth generation, factory photo
Toyota Supra, fifth generation. Factory color shown.

Toyota Supra wrap colors and ideas

  • Supra black wrap
  • Supra white wrap
  • Supra gray wrap
  • Supra silver wrap
  • Supra red wrap
  • Supra blue wrap
  • Supra green wrap
  • Supra yellow wrap
  • Supra orange wrap
  • Supra purple wrap
  • Supra pink wrap
  • Supra teal wrap
  • Supra brown wrap
  • Supra gold wrap
  • Supra chrome wrap
  • Supra color shift wrap
  • Supra carbon fiber wrap
  • Supra camo and patterned wrap

How much vinyl to wrap a Toyota Supra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowcoupe (2 doors)172.4 in (4,379 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)
1993–2002coupe (2 doors)178.0 in (4,520 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1986–1993coupe (2 doors)181.9 in (4,620 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1981–1985coupe (2 doors)183.5 in (4,661 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)
1978–1981coupe (2 doors)181.1 in (4,600 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Supra wrap cost factors

Supra wrap cost depends mainly on the generation, the amount of film, and the labor for its body features. The fifth generation uses about 48 ft (14.5 m) of film and adds time for cutting around sensors, cameras, and fog lamps. Longer generations like the third generation need about 51 ft (15.5 m) of film, which raises material use. A chrome or patterned film on a fourth generation takes roughly 56 ft (17 m), further affecting the job.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Supra wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Supra, fifth generation, factory photo
Factory color shown

2018–now Supra coupe (fifth generation)

2018–nowcoupe (2 doors)172.4 in (4,379 mm)

The fifth generation Toyota Supra is a two-door coupe measuring 172.4 in (4,379 mm) long. This size means a standard color change uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Each of its two long side doors is wrapped as one large piece. A wrap with chrome or patterned film takes about 54 ft (16.5 m).

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Toyota Supra, fourth generation, factory photo
Factory color shown

1993–2002 Supra coupe (fourth generation)

1993–2002coupe (2 doors)178.0 in (4,520 mm)

The fourth generation Toyota Supra was restyled in 1996 with new bumpers and lights. Film cut for a pre-1996 A80 Supra will not fit a post-1996 model because the corners differ. For a full wrap on this generation, plan about 49 ft (15 m) of standard 60-inch film. A chrome or patterned wrap takes roughly 56 ft (17 m) on either version.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Toyota Supra, third generation, factory photo
Factory color shown

1986–1993 Supra coupe (third generation)

1986–1993coupe (2 doors)181.9 in (4,620 mm)

The third generation Toyota Supra from 1986–1993 is often a car with older paint, which matters before a vinyl wrap. Some panels may have been repainted, and a test spot on the paint helps check adhesion before a full wrap. This generation's length of 181.9 in (4,620 mm) means a standard film wrap uses about 51 ft (15.5 m). Chrome or patterned film takes about 56 ft (17 m).

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Toyota Supra, second generation, factory photo
Factory color shown

1981–1985 Supra coupe (second generation)

1981–1985coupe (2 doors)183.5 in (4,661 mm)

The second generation Toyota Supra is a two-door coupe measuring 183.5 in (4,661 mm) long. This size puts a full standard vinyl wrap at about 49 ft (15 m) of 60-inch (1.52 m) film. Like other Supra generations, each of its two long side doors is one large piece. A chrome or patterned wrap on this body takes roughly 57 ft (17.5 m).

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Toyota Supra, first generation, factory photo
Factory color shown

1978–1981 Supra coupe (first generation)

1978–1981coupe (2 doors)181.1 in (4,600 mm)

The first generation Toyota Supra is a two-door coupe with a length of 181.1 in (4,600 mm). A standard color change wrap on this body uses about 48 ft (14.5 m) of 60-inch (1.52 m) film. Each of the two long side doors is wrapped as a single large panel. A chrome or patterned film wrap takes about 56 ft (17 m) for this generation.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Supra

You can wrap only parts of a Toyota Supra, such as the roof, hood, mirror caps, or a chrome delete on window trim and badges. A partial wrap uses less film than a full wrap and suits a smaller change. Clear paint protection film (PPF) on the front end protects the nose without changing the color. These smaller jobs still follow the body lines of the two-door coupe shape.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Toyota Supra: body, cut-outs and film

The Toyota Supra vinyl wrap starts from a two-door coupe body with long side panels on every generation. The fifth generation is the shortest at 172.4 in (4,379 mm) and uses about 48 ft (14.5 m) of standard film. The fourth generation from 1993–2002 is 178.0 in (4,520 mm) long and needs roughly 49 ft (15 m). The third generation is the longest at 181.9 in (4,620 mm) and takes about 51 ft (15.5 m).

Supra wrap ideas should account for sensors, cameras, and lamps that need precise cut-outs on the fifth generation. Every trim has parking sensors in the bumpers, so the installer cuts the film around each sensor. Cameras in the body also require the film to be cut around each lens. Fog lamps in the front bumper need their own cut-outs in the bumper film.

How much vinyl to wrap a Supra changes between generations because lengths and bumper shapes differ. The first generation from 1978–1981 measures 181.1 in (4,600 mm) and uses about 48 ft (14.5 m) of standard film. The second generation grew to 183.5 in (4,661 mm) and needs around 49 ft (15 m). The fourth generation after its 1996 restyling has different bumpers and lights, so film cut for an earlier version will not fit.

Questions about wrapping a Toyota Supra

How much vinyl does it take to wrap a Toyota Supra?

A full wrap of the newest Toyota Supra takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a standard color change. A chrome or patterned film wrap uses about 54 ft (16.5 m) because matching adds waste. The figures come from the fifth generation body from 2018 onward. Older generations may need slightly more film depending on their length.

Can I wrap only the hood or the roof of a Supra?

Yes, you can wrap only the hood or the roof of a Supra as a partial job. For example, the roof, hood, or mirror caps can be wrapped separately. A chrome delete on the window trim and badges is also a partial option. Clear paint protection film on the front end is available without wrapping the whole car.

Is a Supra hard to wrap?

A Supra is moderately hard to wrap because of its size and body features. The fifth generation has parking sensors, cameras, and fog lamps that need cut-outs in the film, which adds labor. The two long side doors are each one large piece, requiring care to avoid wrinkles. The third generation's older paint may need a test spot before a full wrap.

How many generations of the Supra does this page cover?

This page covers five generations of the Supra, from the first generation in 1978 to the fifth generation from 2018 onward. The second generation ran 1981–1985, the third 1986–1993, and the fourth 1993–2002. Each generation is a two-door coupe with its own film estimate. The newest body is the shortest at 172.4 in (4,379 mm).