Wraps by car

Toyota Tank wrap

The Toyota Tank wrap page covers the first-generation minivan built from 2016 to 2020. A vinyl wrap on this five-door van takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 66 ft (20 m).

1generations17 mof film for a full wrap

Toyota Tank, first generation, factory photo
Toyota Tank, first generation. Factory color shown.

Toyota Tank wrap colors and ideas

  • Tank black wrap
  • Tank white wrap
  • Tank gray wrap
  • Tank silver wrap
  • Tank red wrap
  • Tank blue wrap
  • Tank green wrap
  • Tank yellow wrap
  • Tank orange wrap
  • Tank purple wrap
  • Tank pink wrap
  • Tank teal wrap
  • Tank brown wrap
  • Tank gold wrap
  • Tank chrome wrap
  • Tank color shift wrap
  • Tank carbon fiber wrap
  • Tank camo and patterned wrap

How much vinyl to wrap a Toyota Tank

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2016–2020van (5 doors)146.3 in (3,715 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Tank wrap cost factors

Tank wrap cost depends on the size of the van, which is 146.3 in (3,715 mm) long, and the amount of film used. A full wrap takes about 56 ft (17 m) of standard cast film or 66 ft (20 m) of chrome or patterned film. The sliding door tracks also add labor time because the film must be cut along them.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Tank wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Tank, first generation, factory photo
Factory color shown

2016–2020 Tank van (first generation)

2016–2020van (5 doors)146.3 in (3,715 mm)

The first-generation Toyota Tank has sliding side doors that set where the film is cut. The door tracks stay bare, so the installer trims the vinyl along the track edges instead of wrapping into them. This leaves a clean line and keeps the door moving freely.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Tank

A partial wrap on a Toyota Tank can cover the roof, hood, or mirror caps. Tank chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that goes on the front end to shield the bumper and hood.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Tank: body, cut-outs and film

A Toyota Tank vinyl wrap has to follow the tall, boxy body that measures 146.3 in (3,715 mm) long. The single sliding door style in this generation means both sides have a large flat panel, but only one side has a moving door. The high roof adds area, so more film goes above the beltline than on a low sedan.

For Tank wrap ideas, the sliding side doors are the main part that needs special cutting. The door tracks stay bare, so the film is cut along them and not tucked into the channel. Door handles and mirror caps are removed, and the film is trimmed around the headlights and taillights.

To know how much vinyl to wrap a Tank, you compare sizes between the years. This catalog has one generation, from 2016 to 2020, so the body size is the same for all these years. Only the color of the film changes the amount when you choose chrome or a pattern.

Questions about wrapping a Toyota Tank

How much vinyl does it take to wrap a Toyota Tank?

A Toyota Tank takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the amount is about 66 ft (20 m). These figures are for the first-generation body built from 2016 to 2020.

Are the sliding doors of a Tank wrapped?

No, the sliding doors of a Tank are wrapped, but the tracks stay bare. The film is cut along the track edges so the door can move without rubbing the vinyl.

Can I wrap only the hood or the roof of a Tank?

Yes, you can wrap only the hood or the roof of a Tank. A partial wrap can cover the roof, hood, or mirror caps, and chrome delete covers the window trim and badges.

Is a Tank hard to wrap?

A Tank is harder to wrap than a small sedan because of its size and the sliding doors. The body is 146.3 in (3,715 mm) long, which adds film area. The sliding door tracks stay bare, so the film must be cut along them, and that adds work to the install.