Wraps by car

Toyota Urban Cruiser wrap

The Toyota Urban Cruiser wrap page covers the first generation hatchback from 2009 to 2014. A full vinyl wrap of this car uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film jobs take about 59 ft (18 m) of material.

1generations15.5 mof film for a full wrap

Toyota Urban Cruiser, first generation, factory photo
Toyota Urban Cruiser, first generation. Factory color shown.

Toyota Urban Cruiser wrap colors and ideas

  • Urban Cruiser black wrap
  • Urban Cruiser white wrap
  • Urban Cruiser gray wrap
  • Urban Cruiser silver wrap
  • Urban Cruiser red wrap
  • Urban Cruiser blue wrap
  • Urban Cruiser green wrap
  • Urban Cruiser yellow wrap
  • Urban Cruiser orange wrap
  • Urban Cruiser purple wrap
  • Urban Cruiser pink wrap
  • Urban Cruiser teal wrap
  • Urban Cruiser brown wrap
  • Urban Cruiser gold wrap
  • Urban Cruiser chrome wrap
  • Urban Cruiser color shift wrap
  • Urban Cruiser carbon fiber wrap
  • Urban Cruiser camo and patterned wrap

How much vinyl to wrap a Toyota Urban Cruiser

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2014hatchback (5 doors)154.7 in (3,930 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Urban Cruiser wrap cost factors

An Urban Cruiser wrap cost depends on the film, the paint condition, and the labor. This compact hatchback needs about 51 ft of film, so material is a modest part of the job. Extra time for cleaning, removing badges, and working around the tailgate glass affects the final figure.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Urban Cruiser wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Urban Cruiser, first generation, factory photo
Factory color shown

2009–2014 Urban Cruiser hatchback (first generation)

2009–2014hatchback (5 doors)154.7 in (3,930 mm)

The first generation Toyota Urban Cruiser was made from 2009 to 2014. Paint age on these cars varies: panels may be original or repainted. A test spot comes before a full wrap to check paint adhesion. The installer will inspect the hood and roof first.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Urban Cruiser

Partial wrap jobs on a Toyota Urban Cruiser include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Urban Cruiser: body, cut-outs and film

A Toyota Urban Cruiser vinyl wrap is a compact car job at 154.7 in (3,930 mm) long. The five-door hatchback body has simple flat sides and a short roof. Film use is low for a modern hatchback. The tailgate glass is framed by the wrap, so the film stops at the edge of the rear window.

Urban Cruiser wrap ideas start with bright trim and mirror caps. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Door handles and badges come off for a clean install. The side moldings stay on and are wrapped in place.

How much vinyl to wrap a Urban Cruiser depends on the film you choose. The first generation needs about 51 ft (15.5 m) of standard cast film. A chrome or patterned finish uses about 59 ft (18 m) because of the extra waste.

Questions about wrapping a Toyota Urban Cruiser

How much vinyl does it take to wrap a Toyota Urban Cruiser?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Toyota Urban Cruiser. That figure is for the first generation hatchback body. Chrome or patterned film jobs use about 59 ft (18 m).

Can I wrap only the hood or the roof of a Urban Cruiser?

Yes, you can wrap only the hood or the roof of a Urban Cruiser. The roof, hood, and mirror caps are listed as standalone partial wrap jobs. This keeps the cost lower than a full wrap.

Is a Urban Cruiser hard to wrap?

The Urban Cruiser is not especially hard to wrap. The compact hatchback body has flat panels and a short roof. The main extra work is the tailgate with the rear glass in it: the film ends at the edge of the glass.

How many generations of the Urban Cruiser does this page cover?

This page covers one generation of the Urban Cruiser. The Toyota Urban Cruiser was produced as a first generation from 2009 to 2014. No other generations are listed in the catalog.