Wraps by car

Toyota Vanguard wrap

This page covers the Toyota Vanguard, a five-door SUV built from 2007 to 2013. Toyota offered one generation of the Vanguard in that period. A full vinyl wrap of the Vanguard body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Plan for about 69 ft (21 m) if you choose chrome or patterned film.

1generations18.5 mof film for a full wrap

Toyota Vanguard, first generation, factory photo
Toyota Vanguard, first generation. Factory color shown.

Toyota Vanguard wrap colors and ideas

  • Vanguard black wrap
  • Vanguard white wrap
  • Vanguard gray wrap
  • Vanguard silver wrap
  • Vanguard red wrap
  • Vanguard blue wrap
  • Vanguard green wrap
  • Vanguard yellow wrap
  • Vanguard orange wrap
  • Vanguard purple wrap
  • Vanguard pink wrap
  • Vanguard teal wrap
  • Vanguard brown wrap
  • Vanguard gold wrap
  • Vanguard chrome wrap
  • Vanguard color shift wrap
  • Vanguard carbon fiber wrap
  • Vanguard camo and patterned wrap

How much vinyl to wrap a Toyota Vanguard

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2013SUV (5 doors)179.9 in (4,570 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Vanguard wrap cost factors

Vanguard wrap cost on this page is not a price but the factors that decide the film bill. The fixed figures are the body length of 179.9 in (4,570 mm) and the film estimate of about 61 ft (18.5 m) for a full wrap. The cost also depends on film type: standard cast film, chrome film, or patterned film. Any partial wrap like a roof or a hood reduces the amount of film needed.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Vanguard wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Vanguard, first generation, factory photo
Factory color shown

2007–2013 Vanguard SUV (first generation)

2007–2013SUV (5 doors)179.9 in (4,570 mm)

The first generation Toyota Vanguard comes from 2007 to 2013 as a five-door SUV. On a car of these years the paint may be original or repainted panel by panel. A test spot of film on the paint comes before a full wrap to check adhesion. The XA30 body code tells you this is one fixed shape for all Vanguards of this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Vanguard

A partial wrap on a Toyota Vanguard can cover the roof, the hood, or the mirror caps. A Vanguard chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is clear film applied to the front end of the Vanguard. Each of these jobs uses less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Vanguard: body, cut-outs and film

A Toyota Vanguard vinyl wrap covers one uniform SUV body style with five doors. The body is 179.9 in (4,570 mm) long, which sets the size of wrap panels. A roof wrap and a tailgate wrap are the two largest pieces of film on this car. The five-door layout means the film is split at the door lines.

Vanguard wrap ideas often start with a full color change in cast vinyl film. The tailgate has the rear glass set into it, so the film ends at the edge of the glass. For a clean finish the installer cuts around the glass edge rather than wrapping the glass. The door handles and the side mirrors also need cut-outs or come off for wrap.

How much vinyl to wrap a Vanguard depends on the one body that Toyota made. The first generation from 2007 to 2013 uses the same XA30 body shell. A full wrap of the Vanguard needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. If you count film for chrome delete or patterned vinyl, the total rises to about 69 ft (21 m).

Questions about wrapping a Toyota Vanguard

How much vinyl does it take to wrap a Toyota Vanguard?

A Toyota Vanguard takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the estimate rises to about 69 ft (21 m). These figures cover the five-door SUV body of the Vanguard from 2007 to 2013.

Can I wrap only the hood or the roof of a Vanguard?

Yes, you can wrap only the hood or the roof of a Vanguard. A partial wrap on this car often covers the roof, the hood, or the mirror caps. A chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is clear film applied to the front end.

Is a Vanguard hard to wrap?

A Vanguard is not the hardest car to wrap, but the tailgate adds work. The tailgate has the rear glass set into it, so the film ends at the edge of the glass. The body length of 179.9 in (4,570 mm) means large panels that need careful alignment. The door handles and side mirrors need cut-outs or removal for a clean install.

How many generations of the Vanguard does this page cover?

This page covers one generation of the Toyota Vanguard. That is the first generation, built from 2007 to 2013. Toyota did not introduce another body for the Vanguard after that. All Vanguard wrap information on this page applies to that single XA30 body.