Wraps by car

Toyota Vellfire wrap

This Toyota Vellfire wrap page covers the second generation (2015–2017) and the first generation (2008–2015). A full wrap of the newest Vellfire body takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film. More film, about 84 ft (25.5 m), is needed if you choose chrome or patterned vinyl wrap.

2generations22.5 mof film for a full wrap

Toyota Vellfire, second generation, factory photo
Toyota Vellfire, second generation. Factory color shown.

Toyota Vellfire wrap colors and ideas

  • Vellfire black wrap
  • Vellfire white wrap
  • Vellfire gray wrap
  • Vellfire silver wrap
  • Vellfire red wrap
  • Vellfire blue wrap
  • Vellfire green wrap
  • Vellfire yellow wrap
  • Vellfire orange wrap
  • Vellfire purple wrap
  • Vellfire pink wrap
  • Vellfire teal wrap
  • Vellfire brown wrap
  • Vellfire gold wrap
  • Vellfire chrome wrap
  • Vellfire color shift wrap
  • Vellfire carbon fiber wrap
  • Vellfire camo and patterned wrap

How much vinyl to wrap a Toyota Vellfire

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2017van (5 doors)194.1 in (4,930 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)
2008–2015van (5 doors)190.9 in (4,850 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Vellfire wrap cost factors

Vellfire wrap cost depends on the film type, the van size, and the labor for its tall body and sliding doors. The second generation is 194.1 in (4,930 mm) long and the first generation is 190.9 in (4,850 mm) long. Chrome or patterned film adds about 10 ft (3 m) to the material needed. A full wrap includes working on the roof from a platform.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (76.8 in (1,950 mm)): the roof is wrapped from a platform.

Vellfire wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Vellfire, second generation, factory photo
Factory color shown

2015–2017 Vellfire van (second generation)

2015–2017van (5 doors)194.1 in (4,930 mm)

The second generation Toyota Vellfire (2015–2017) has sliding side doors. The tracks stay bare, so the film is cut along them to allow proper door movement. This body is 194.1 in (4,930 mm) long and 76.8 in (1,950 mm) tall. The roof is wrapped from a platform due to the height.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (76.8 in (1,950 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Toyota Vellfire, first generation, factory photo
Factory color shown

2008–2015 Vellfire van (first generation)

2008–2015van (5 doors)190.9 in (4,850 mm)

The first generation Toyota Vellfire (2008–2015) often has older paint. Panels may be original or repainted, so a test spot is done before a full wrap. This generation is 190.9 in (4,850 mm) long and 74.4 in (1,890 mm) tall. Its sliding doors also have tracks that stay bare and guide the film cut.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (74.4 in (1,890 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Vellfire

A Vellfire chrome delete covers the window trim and badges with black film. A partial wrap can include the roof, hood, and mirror caps. For paint protection, clear film (PPF) is applied to the front end. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Vellfire: body, cut-outs and film

The Toyota Vellfire vinyl wrap must cover a large five-door van body. The second generation measures 194.1 in (4,930 mm) long, and the first generation is 190.9 in (4,850 mm) long. Both are tall, so the roof requires a platform during installation. The sliding side doors have tracks that stay bare and guide where the film is cut.

Vellfire wrap ideas often start with the sliding side doors. The door tracks remain uncovered, and the film is cut neatly along them. The roof is tall, so a full wrap needs a safe working platform. You can also plan cut-outs for door handles, lights, and badges.

To know how much vinyl to wrap a Vellfire, check the generation. The first generation from 2008–2015 needs about 74 ft (22.5 m) of standard cast film, or about 82 ft (25 m) for chrome or patterned film. The second generation from 2015–2017 needs the same 74 ft (22.5 m) for standard film, but about 84 ft (25.5 m) for special films.

Questions about wrapping a Toyota Vellfire

How much vinyl does it take to wrap a Toyota Vellfire?

About 74 ft (22.5 m) of 60-inch (1.52 m) cast film is needed to wrap a Toyota Vellfire. This figure is for the newest body, the second generation from 2015–2017, using standard cast film. If you choose chrome or patterned film, allow about 84 ft (25.5 m).

Are the sliding doors of a Vellfire wrapped?

Yes, the sliding doors of a Vellfire are wrapped. The door tracks stay bare, and the film is cut along them so the doors slide correctly. This applies to both generations, from 2008 to 2017.

Can I wrap only the hood or the roof of a Vellfire?

Yes, you can wrap only the hood or the roof of a Vellfire. A partial wrap can cover the roof, hood, and mirror caps. Chrome delete on window trim and badges is another smaller job. Clear paint protection film on the front end is also an option.

Is a Vellfire hard to wrap?

A Vellfire is not overly hard to wrap, but its size and sliding doors add work. The body is tall: 76.8 in (1,950 mm) on the second generation, so the roof is wrapped from a platform. The sliding door tracks must stay bare, which means careful cutting along them.