Wraps by car

Toyota Verso wrap

The Toyota Verso wrap page covers the first-generation minivan built from 2009 to 2018, its five-door van body, and the film estimate for a full wrap. A complete color change on the newest body uses about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap. If you choose chrome or patterned film, plan for about 76 ft (23 m).

1generations20 mof film for a full wrap

Toyota Verso, first generation, factory photo
Toyota Verso, first generation. Factory color shown.

Toyota Verso wrap colors and ideas

  • Verso black wrap
  • Verso white wrap
  • Verso gray wrap
  • Verso silver wrap
  • Verso red wrap
  • Verso blue wrap
  • Verso green wrap
  • Verso yellow wrap
  • Verso orange wrap
  • Verso purple wrap
  • Verso pink wrap
  • Verso teal wrap
  • Verso brown wrap
  • Verso gold wrap
  • Verso chrome wrap
  • Verso color shift wrap
  • Verso carbon fiber wrap
  • Verso camo and patterned wrap

How much vinyl to wrap a Toyota Verso

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2018van (5 doors)174.8 in (4,440 mm) to 175.6 in (4,460 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Verso wrap cost factors

Verso wrap cost depends on the size of the body, the film you pick, and the work the trim adds. The body is 174.8 in (4,440 mm) to 175.6 in (4,460 mm) long, so a full wrap needs about 66 ft (20 m) of 60-inch cast film, or about 76 ft (23 m) of chrome or patterned film. Some trims have a panoramic glass roof, roof rails, parking sensors, cameras, or fog lamps, and each one adds cut-outs or removal work. The restyle in 2012 did not change the main panels, so labor stays the same across the generation.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2012: bumpers and lights differ between the versions, and so do the film cuts.

Verso wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Verso, first generation, factory photo
Factory color shown

2009–2018 Verso van (first generation)

2009–2018van (5 doors)174.8 in (4,440 mm) to 175.6 in (4,460 mm)

The first generation Toyota Verso from 2009 to 2018 has sliding side doors, and the tracks stay bare and decide where the film is cut. The wrap film is trimmed along the top and bottom of each track, leaving a clean line that follows the door movement. The installer does not wrap the track itself, so the film does not interfere with the door sliding. This makes the sliding door area one of the key places to plan seams on this body.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Verso

If you want less than a full wrap on a Toyota Verso, a partial wrap covers the hood, mirror caps, and roof on cars without the glass panel. A Verso chrome delete covers the window trim and badges with black film, and it can be done with cast or calendared film. Paint protection film (PPF) is clear film on the front end, including the hood, bumper, and mirror caps, and it is cut around any sensors or cameras.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Verso: body, cut-outs and film

The Toyota Verso vinyl wrap has to suit a body that is 174.8 in (4,440 mm) to 175.6 in (4,460 mm) long, so the installer can work panel by panel without a full booth. The five-door van shape keeps the roof, hood, and side panels large and flat, which makes the film easier to lay down smoothly. The sliding side doors add extra seams because the film must stop at the door tracks. The rear bumper and tailgate wrap as separate pieces, so waste stays low on this body.

Verso wrap ideas start with the sliding side doors, because the door tracks stay bare and the film is cut along them. The front and rear bumpers may have parking sensors or fog lamps on some trims, and the film is cut around each sensor or lamp. Some trims have a panoramic glass roof that is not wrapped, so the film ends at the roof rails. If the car has roof rails, they come off before the roof is wrapped, or the film is cut along them. Cameras in the body also need the film cut around each lens.

To figure how much vinyl to wrap a Verso, you only need one generation: the first generation ran from 2009 to 2018 with a restyle in 2012. The restyle changed the bumpers and lights, but the main body panels stayed the same, so the same film cuts fit the whole run. The length range is 174.8 in (4,440 mm) to 175.6 in (4,460 mm), which changes the film needed by a small amount. A full wrap on the newest body uses about 66 ft (20 m) of 60-inch cast film, and chrome or patterned film needs about 76 ft (23 m).

Questions about wrapping a Toyota Verso

How much vinyl does it take to wrap a Toyota Verso?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap a Toyota Verso, assuming the newest body from 2009–2018. If you use chrome or patterned film, plan for about 76 ft (23 m) because the pattern repeat needs extra material.

Are the sliding doors of a Verso wrapped?

No, the sliding doors of a Verso are not wrapped over the tracks; the film is cut along the door tracks, which stay bare. The film covers the outer panel of each sliding door up to the track line, but it does not go into the track itself.

Can the roof of a Verso be wrapped?

Yes, the roof of a Verso can be wrapped, but on some trims there is a panoramic glass roof that is not wrapped, so the film ends at the roof rails. If the car has roof rails, they come off before the roof is wrapped, or the film is cut along them.

Which years of the Verso take the same film cuts?

All years of the first generation Verso from 2009 to 2018 take the same film cuts, except for the 2012 restyle, which changed the bumpers and lights. The main body panels are the same, so the side and roof cuts fit every year, but the front and rear bumper cuts differ before and after the restyle.