Wraps by car

Toyota Vios wrap

This page covers the Toyota Vios wrap across three generations of the compact sedan. Each generation has a four-door body, so every Vios wrap includes four doors, fenders, roof, hood, and trunk. The newest body, the third generation from 2013 to 2016, needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a full color change wrap. Chrome or patterned vinyl raises that figure to about 62 ft (19 m).

3generations16.5 mof film for a full wrap

Toyota Vios, third generation, factory photo
Toyota Vios, third generation. Factory color shown.

Toyota Vios wrap colors and ideas

  • Vios black wrap
  • Vios white wrap
  • Vios gray wrap
  • Vios silver wrap
  • Vios red wrap
  • Vios blue wrap
  • Vios green wrap
  • Vios yellow wrap
  • Vios orange wrap
  • Vios purple wrap
  • Vios pink wrap
  • Vios teal wrap
  • Vios brown wrap
  • Vios gold wrap
  • Vios chrome wrap
  • Vios color shift wrap
  • Vios carbon fiber wrap
  • Vios camo and patterned wrap

How much vinyl to wrap a Toyota Vios

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2016sedan (4 doors)173.6 in (4,409 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2007–2013sedan (4 doors)169.3 in (4,300 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2002–2007sedan (4 doors)168.7 in (4,285 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Vios wrap cost factors

The Vios wrap cost depends on the amount of film and the labor for the body size and film type. A full wrap of the newest generation needs about 54 ft (16.5 m) of cast film, while the first generation needs about 48 ft (14.5 m). If you choose chrome or patterned film, the cost is higher because it requires a more careful layout and uses more material. Partial jobs like a roof wrap or chrome delete use less film and less labor.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Vios wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Vios, third generation, factory photo
Factory color shown

2013–2016 Vios sedan (third generation)

2013–2016sedan (4 doors)173.6 in (4,409 mm)

The third generation of the Toyota Vios, produced from 2013 to 2016, is a four-door sedan with a compact body. Its length of 173.6 in (4,409 mm) means a full wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The four doors and the short overhangs make the panel shapes straightforward. The roof is flat and the hood is moderate in size, so the film can be cut efficiently.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Toyota Vios, second generation, factory photo
Factory color shown

2007–2013 Vios sedan (second generation)

2007–2013sedan (4 doors)169.3 in (4,300 mm)

The second generation Vios, from 2007 to 2013, may have original paint that is now more than a decade old. Before wrapping, we test a small area of the paint with low-tack masking tape to check adhesion. If a panel has been repainted, the film may lift the paint when removed, so a test spot on each panel is necessary. This step prevents damage to the finish before the full wrap begins.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Toyota Vios, first generation, factory photo
Factory color shown

2002–2007 Vios sedan (first generation)

2002–2007sedan (4 doors)168.7 in (4,285 mm)

The first generation Vios, produced from 2002 to 2007, is the shortest of the three generations at 168.7 in (4,285 mm). A full wrap of this body needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The four-door sedan body style means the same number of panels as later generations, but the panels are slightly smaller. The compact size makes the wrap a manageable amount of work.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Vios

A partial wrap on the Toyota Vios typically covers the roof, the hood, and the mirror caps. Vios chrome delete means covering the window trim and badges with black film to change the bright trim. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs can be done without wrapping the entire car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Vios: body, cut-outs and film

A Toyota Vios vinyl wrap is planned around the sedan’s four doors and compact footprint. The third generation is 173.6 in (4,409 mm) long, so the film estimate is about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl. The body style keeps the number of panels moderate, with ten main exterior panels for a full wrap. The roof and hood are simple shapes, and the doors are tall but not unusually wide.

Vios wrap ideas often include covering the side mirrors and deleting the chrome window trim with black film. The door handles, badges, and antenna need cut-outs or are removed before the vinyl is applied. The bumper corners and the lower rocker panels take extra time because of their compound curves. The fuel filler door is wrapped separately as a small panel.

For someone counting film, the generations change by body length and film requirements. The third generation from 2013 to 2016 uses about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The second generation from 2007 to 2013 uses about 52 ft (16 m) of the same film, and the first generation from 2002 to 2007 uses about 48 ft (14.5 m). All generations are four-door sedans, so the panel count stays the same, but the newer the car, the longer the panels.

Questions about wrapping a Toyota Vios

How much vinyl does it take to wrap a Toyota Vios?

Yes. A full wrap of a Toyota Vios, using the newest body, takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl. The exact amount can vary slightly depending on the installer's cutting method and the film's pattern match. For chrome or patterned film, you need about 62 ft (19 m) because the pattern must be aligned.

Can I wrap only the hood or the roof of a Vios?

Yes, you can wrap only the hood or the roof of a Vios. These are classic partial wrap jobs, and the hood and roof are flat panels that use a small amount of film. The mirror caps and window trim can also be wrapped separately, often with a black film for a chrome delete.

Is a Vios hard to wrap?

A Vios wrap is moderately difficult because of its four-door sedan body and compact size. The doors are tall enough that the film must be stretched over a large flat area, and the bumper corners need careful heating. The first generation has a shorter body, but the curves are similar. A test spot on older paint is necessary before the full wrap to prevent lifting the paint.

How many generations of the Vios does this page cover?

This page covers three generations of the Toyota Vios. The first generation is from 2002 to 2007, the second from 2007 to 2013, and the third from 2013 to 2016. Each generation is a four-door sedan.