Wraps by car

Toyota Voltz wrap

A Toyota Voltz wrap is a vinyl wrap applied to the compact Toyota Voltz hatchback. The page covers one generation of the Voltz, produced from 2002 to 2004. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 66 ft (20 m).

1generations17 mof film for a full wrap

Toyota Voltz, first generation, factory photo
Toyota Voltz, first generation. Factory color shown.

Toyota Voltz wrap colors and ideas

  • Voltz black wrap
  • Voltz white wrap
  • Voltz gray wrap
  • Voltz silver wrap
  • Voltz red wrap
  • Voltz blue wrap
  • Voltz green wrap
  • Voltz yellow wrap
  • Voltz orange wrap
  • Voltz purple wrap
  • Voltz pink wrap
  • Voltz teal wrap
  • Voltz brown wrap
  • Voltz gold wrap
  • Voltz chrome wrap
  • Voltz color shift wrap
  • Voltz carbon fiber wrap
  • Voltz camo and patterned wrap

How much vinyl to wrap a Toyota Voltz

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2002–2004hatchback (5 doors)171.9 in (4,365 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Voltz wrap cost factors

Voltz wrap cost depends on the size of the car, the film chosen, and the condition of the paint. The Voltz is a compact hatchback at 171.9 in (4,365 mm) long, so it uses less film than a larger vehicle. Chrome or patterned film raises the cost because it needs about 66 ft (20 m) instead of 56 ft (17 m). Paint repairs before wrapping also add to the total.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Voltz wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Voltz, first generation, factory photo
Factory color shown

2002–2004 Voltz hatchback (first generation)

2002–2004hatchback (5 doors)171.9 in (4,365 mm)

The first-generation Toyota Voltz was built from 2002 to 2004. A car of these years may have original or repainted panels, so a test spot comes before a full wrap. The paint condition affects how well the vinyl adheres. You should check each panel for peeling or uneven clear coat.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Voltz

A partial wrap on a Toyota Voltz can cover the roof, hood, or mirror caps. Voltz chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs cost less in material than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Voltz: body, cut-outs and film

A Toyota Voltz vinyl wrap has to cover a five-door hatchback body that measures 171.9 in (4,365 mm) long. The single body style keeps the wrap layout straightforward, but the roof and tailgate add surface area. You will use most of the film on the large side panels and roof. The compact size means fewer seams than on a longer vehicle.

Voltz wrap ideas start with the tailgate, since the rear glass is set into it and the film must end at the edge of the glass. Other areas need cut-outs for door handles, mirrors, lights, and the fuel filler. The door handles and mirror caps can be removed for cleaner edges. The tailgate glass cannot be wrapped over, so the film line follows the glass exactly.

How much vinyl to wrap a Voltz depends on the film type, because the car came in only one generation. The estimate for a full wrap is about 56 ft (17 m) of standard 60-inch (1.52 m) cast film. If you choose chrome or patterned film, you need about 66 ft (20 m) to match the pattern direction. Always buy a little extra for mistakes and complex curves.

Questions about wrapping a Toyota Voltz

How much vinyl does it take to wrap a Toyota Voltz?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Toyota Voltz. That estimate covers a full wrap of the standard body. With chrome or patterned film, you need about 66 ft (20 m).

Can I wrap only the hood or the roof of a Voltz?

Yes, you can wrap only the hood or the roof of a Voltz. The partial wrap options for this car include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges. Paint protection film on the front end is another smaller job.

Is a Voltz hard to wrap?

A Voltz is not especially hard to wrap, but the tailgate adds work because the rear glass is set into it. The film must end at the edge of the glass, so you trim carefully around that opening. The car's compact size at 171.9 in (4,365 mm) long is easier to manage than a longer vehicle. You still need to remove or mask door handles and mirrors.

How many generations of the Voltz does this page cover?

This page covers one generation of the Toyota Voltz. That generation was produced from 2002 to 2004. All Voltz models fall into this single generation.