Wraps by car

Toyota Wish wrap

The Toyota Wish wrap page covers both generations of this five-door minivan. The first generation ran from 2003 to 2009 and the second from 2009 to 2017. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) film.

2generations20 mof film for a full wrap

Toyota Wish, second generation, factory photo
Toyota Wish, second generation. Factory color shown.

Toyota Wish wrap colors and ideas

  • Wish black wrap
  • Wish white wrap
  • Wish gray wrap
  • Wish silver wrap
  • Wish red wrap
  • Wish blue wrap
  • Wish green wrap
  • Wish yellow wrap
  • Wish orange wrap
  • Wish purple wrap
  • Wish pink wrap
  • Wish teal wrap
  • Wish brown wrap
  • Wish gold wrap
  • Wish chrome wrap
  • Wish color shift wrap
  • Wish carbon fiber wrap
  • Wish camo and patterned wrap

How much vinyl to wrap a Toyota Wish

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2017van (5 doors)180.7 in (4,590 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2003–2009van (5 doors)179.1 in (4,550 mm) to 179.5 in (4,560 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Wish wrap cost factors

Wish wrap cost depends on the film choice and the size of the vehicle. A full wrap of the 180.7 in (4,590 mm) second generation uses about 66 ft (20 m) of cast film. Chrome or patterned film raises the amount to about 76 ft (23 m). Door tracks and other cut-outs add labor time to the job.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2012: bumpers and lights differ between the versions, and so do the film cuts.

Wish wraps by generation

Swipe sideways. Tap a card for the full description.

Toyota Wish, second generation, factory photo
Factory color shown

2009–2017 Wish van (second generation)

2009–2017van (5 doors)180.7 in (4,590 mm)

The second generation Toyota Wish was produced from 2009 to 2017 with a restyling in 2012. This generation is 180.7 in (4,590 mm) long and takes about 66 ft (20 m) of 60-inch film for a full wrap. The sliding side door tracks stay bare, and the film is cut along them.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

2003–2009 Wish van (first generation)

2003–2009van (5 doors)179.1 in (4,550 mm) to 179.5 in (4,560 mm)

The first generation Toyota Wish was produced from 2003 to 2009 with a restyling in 2005. Paint age on a car of these years can vary between original and repainted panels. A test spot before a full wrap shows whether the surface is ready for film.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Wish

A partial wrap on a Toyota Wish can cover the roof, hood, or mirror caps. Wish chrome delete turns the window trim and badges black with film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Toyota Wish: body, cut-outs and film

The Toyota Wish vinyl wrap follows a single van body style across both generations. The second generation measures 180.7 in (4,590 mm) long, while the first is 179.1 in (4,550 mm) to 179.5 in (4,560 mm). This small difference does not change the film estimate between generations.

Wish wrap ideas start with the sliding side doors that define the vehicle. The door tracks stay bare, and the film is cut along them on both generations. Removing door handles, mirrors, and badges gives the installer clean edges around those parts.

How much vinyl to wrap a Wish changes little across the two generations. A full wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film on either body. Add roughly 10 ft (3 m) when using chrome or patterned film.

Questions about wrapping a Toyota Wish

How much vinyl does it take to wrap a Toyota Wish?

A Toyota Wish takes about 66 ft (20 m) of 60-inch (1.52 m) vinyl for a full wrap. The newest body in the catalog is the second generation, from 2009 to 2017. Chrome or patterned film would need about 76 ft (23 m).

Are the sliding doors of a Wish wrapped?

Yes, the sliding doors of a Wish are wrapped. The door tracks stay bare, and the film is cut along them. Both generations from 2003 to 2017 have this design.

Which years of the Wish take the same film cuts?

The film cuts for a Toyota Wish are the same within each generation. The second generation ran from 2009 to 2017, with a restyling in 2012. The first generation ran from 2003 to 2009, with a restyling in 2005.

Can I wrap only the hood or the roof of a Wish?

Yes, you can wrap only the hood or the roof of a Wish. A partial wrap can also cover the mirror caps. Chrome delete and paint protection film are other options for this car.