Wraps by car

Dodge Avenger wrap

The Dodge Avenger wrap page covers two generations of this full-size car. The second generation was produced from 2007 to 2014 as a four-door sedan. The first generation was built from 1994 to 2000 as a two-door coupe. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations18.5 mof film for a full wrap

Dodge Avenger, second generation, factory photo
Dodge Avenger, second generation. Factory color shown.

Dodge Avenger wrap colors and ideas

  • Avenger black wrap
  • Avenger white wrap
  • Avenger gray wrap
  • Avenger silver wrap
  • Avenger red wrap
  • Avenger blue wrap
  • Avenger green wrap
  • Avenger yellow wrap
  • Avenger orange wrap
  • Avenger purple wrap
  • Avenger pink wrap
  • Avenger teal wrap
  • Avenger brown wrap
  • Avenger gold wrap
  • Avenger chrome wrap
  • Avenger color shift wrap
  • Avenger carbon fiber wrap
  • Avenger camo and patterned wrap

How much vinyl to wrap a Dodge Avenger

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2014sedan (4 doors)190.9 in (4,850 mm) to 192.6 in (4,892 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
1994–2000coupe (2 doors)187.2 in (4,755 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Avenger wrap cost factors

The Avenger wrap cost depends on the generation, the size of the car, and the film choice. The second-generation sedan is 190.9 in (4,850 mm) to 192.6 in (4,892 mm) long and needs more material than the first-generation coupe at 187.2 in (4,755 mm). A cast film wrap uses about 61 ft (18.5 m) for the sedan and 49 ft (15 m) for the coupe. Chrome or patterned film raises the material amount to about 69 ft (21 m) and 64 ft (19.5 m) respectively.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

Avenger wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Avenger, second generation, factory photo
Factory color shown

2007–2014 Avenger sedan (second generation)

2007–2014sedan (4 doors)190.9 in (4,850 mm) to 192.6 in (4,892 mm)

The second generation of the Dodge Avenger was built from 2007 to 2014 as a four-door sedan. A restyling in 2010 changed the bumpers and lights, so film cut for one version does not fit the other. The car measures 190.9 in (4,850 mm) to 192.6 in (4,892 mm) long. A full wrap needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) for chrome or patterned film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Dodge Avenger, first generation, factory photo
Factory color shown

1994–2000 Avenger coupe (first generation)

1994–2000coupe (2 doors)187.2 in (4,755 mm)

The first generation of the Dodge Avenger was produced from 1994 to 2000 as a two-door coupe. Paint age matters on a car of these years, as panels may be original or repainted, and a test spot comes before a full wrap. The coupe is 187.2 in (4,755 mm) long. It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) for chrome or patterned film.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Avenger

The Dodge Avenger works well for smaller jobs than a full wrap. You can choose a partial wrap of the roof, hood, or mirror caps. An Avenger chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dodge Avenger: body, cut-outs and film

The Dodge Avenger vinyl wrap is shaped by the body styles and sizes of its two generations. The second-generation sedan measures 190.9 in (4,850 mm) to 192.6 in (4,892 mm) long and has four doors. The first-generation coupe is 187.2 in (4,755 mm) long and has only two doors. Larger panels and extra doors mean more film and more installation time.

Avenger wrap ideas start with the panels that need extra attention. The first-generation coupe has two long side doors, and each door is one large piece of film. The second-generation sedan has four doors, hood, roof, and trunk as the main wrapped areas. Door handles, mirrors, and badges require cut-outs or removal before the film goes on.

How much vinyl to wrap an Avenger changes between the two generations. A full wrap of the second-generation sedan needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The first-generation coupe is smaller and takes about 49 ft (15 m) of the same film. Chrome or patterned film adds waste, so the total rises to about 69 ft (21 m) for the sedan and 64 ft (19.5 m) for the coupe.

Questions about wrapping a Dodge Avenger

How much vinyl does it take to wrap a Dodge Avenger?

About 61 ft (18.5 m) of 60-inch (1.52 m) vinyl is needed to wrap a Dodge Avenger. This figure is for the newest body, the second-generation sedan from 2007 to 2014. The first-generation coupe is smaller and takes about 49 ft (15 m). Chrome or patterned film requires more material, about 69 ft (21 m) for the sedan.

Which years of the Avenger take the same film cuts?

The 2007 to 2009 sedans take one set of film cuts, and the 2010 to 2014 sedans take another. The Avenger was restyled in 2010 with different bumpers and lights, so the cuts are not interchangeable. The first-generation coupe from 1994 to 2000 uses its own cuts.

Can I wrap only the hood or the roof of an Avenger?

Yes, you can wrap only the hood or the roof of an Avenger. These panels are common choices for a partial wrap. Mirror caps can also be wrapped on their own. A smaller job uses less film and costs less than a full wrap.

Is an Avenger hard to wrap?

An Avenger is not especially hard to wrap, but a few things add work. The first-generation coupe has two long side doors, each requiring one large piece of film. The second-generation sedan is a full-size car up to 192.6 in (4,892 mm) long, so there is more surface area than on a compact. Careful cutting is needed around door handles, mirrors, and badges.