Wraps by car

Dodge Neon wrap

This page covers the Dodge Neon wrap for both generations built from 1994 to 2005. A full wrap of the newest body uses about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap. The first generation coupe needs about 46 ft (14 m), and the sedan up to 49 ft (15 m). Details for each body follow below.

2generations15 mof film for a full wrap

Dodge Neon, second generation, factory photo
Dodge Neon, second generation. Factory color shown.

Dodge Neon wrap colors and ideas

  • Neon black wrap
  • Neon white wrap
  • Neon gray wrap
  • Neon silver wrap
  • Neon red wrap
  • Neon blue wrap
  • Neon green wrap
  • Neon yellow wrap
  • Neon orange wrap
  • Neon purple wrap
  • Neon pink wrap
  • Neon teal wrap
  • Neon brown wrap
  • Neon gold wrap
  • Neon chrome wrap
  • Neon color shift wrap
  • Neon carbon fiber wrap
  • Neon camo and patterned wrap

How much vinyl to wrap a Dodge Neon

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2005sedan (4 doors)172.8 in (4,390 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1994–1999coupe, sedan (2 or 4 doors)171.8 in (4,364 mm)about 46 ft (14 m) for the coupe to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Neon wrap cost factors

Neon wrap cost depends on the film amount, the body style and the condition of the paint. The compact size means a full wrap uses about 46 to 49 ft (14 to 15 m) of 60-inch (1.52 m) film, less than a mid-size car. A first-generation coupe needs about 3 ft (1 m) less than a sedan, which lowers the film cost slightly. Paint age also matters, because older or repainted panels need more prep before the vinyl goes on.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Neon wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Neon, second generation, factory photo
Factory color shown

1999–2005 Neon sedan (second generation)

1999–2005sedan (4 doors)172.8 in (4,390 mm)

The second-generation Dodge Neon from 1999 to 2005 is a four-door sedan that is 172.8 in (4,390 mm) long. A full wrap of this body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 61 ft (18.5 m) for chrome or patterned film. Because the car is now over 20 years old, panels may be original or repainted, and a test spot on the paint comes before a full wrap. The four door handles and long roof are the main areas that need cut-outs.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Dodge Neon, first generation, factory photo
Factory color shown

1994–1999 Neon coupe, sedan (first generation)

1994–1999coupe, sedan (2 or 4 doors)171.8 in (4,364 mm)

The first-generation Dodge Neon from 1994 to 1999 came as a coupe or sedan with two or four doors. The coupe is 171.8 in (4,364 mm) long and needs about 46 ft (14 m) of 60-inch (1.52 m) film, while the sedan needs up to 49 ft (15 m). The body style decides the panel plan: a coupe has long doors and a fixed B-pillar, while a sedan has four door cut lines and a separate trunk. Both styles fit in the compact class, so the wrap job is similar in total area.

Film: about 46 ft (14 m) for the coupe to 49 ft (15 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Neon

A partial wrap on a Dodge Neon can cover the roof, hood or mirror caps to change the look without a full color change. Neon chrome delete covers the window trim and badges with black film for a clean accent. Paint protection film (PPF) is clear film on the front end to guard the bumper, hood and fenders. These smaller jobs use only a few feet of film and are a good first step before a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dodge Neon: body, cut-outs and film

The Dodge Neon vinyl wrap is planned around a compact sedan or coupe body. The second-generation sedan is 172.8 in (4,390 mm) long, while the first generation ranges from 171.8 in (4,364 mm) for the coupe to similar sedans. The 4-door body has four door handles, mirrors and a trunk, so a full wrap needs about 49 ft (15 m) of 60-inch (1.52 m) film. The 2-door coupe has longer doors and no rear door cut lines, which reduces film to about 46 ft (14 m).

Neon wrap ideas start with the front and rear bumpers, which need inlays or relief cuts on the curved corners. The door handles, mirrors and antenna are removed or cut out for a clean install. The window trim and badges are common areas for chrome delete with black film. The roof and hood are flat enough for one-piece panels, but the hood scoop on some first-generation coupes adds a seam.

To know how much vinyl to wrap a Neon, compare the two generations. The second-generation sedan uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, while a first-generation coupe uses about 46 ft (14 m) and a first-generation sedan up to 49 ft (15 m). Chrome or patterned film requires about 61 ft (18.5 m) because the pattern must be matched. The body length differs by only 1 inch (25 mm), so the panel count stays the same.

Questions about wrapping a Dodge Neon

How much vinyl does it take to wrap a Dodge Neon?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl to wrap a Dodge Neon. That figure is for the newest body, the second-generation sedan from 1999 to 2005. A first-generation coupe needs about 46 ft (14 m), and a first-generation sedan up to 49 ft (15 m). If you choose chrome or patterned film, plan for about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Neon?

Yes, you can wrap only the hood or the roof of a Neon. A partial wrap often includes the roof, hood or mirror caps, and a chrome delete covers window trim and badges. These jobs use far less film than a full wrap, often just a few feet of 60-inch (1.52 m) material. The roof and hood on a Neon are flat enough for a single piece without seams.

Is a Neon hard to wrap?

A Neon is not hard to wrap as a compact car, but some areas add work. The front and rear bumpers have curved corners that need relief cuts or inlays. The door handles, mirrors and antenna must be removed or cut around, and the hood scoop on some first-generation coupes adds a seam. Its small size means fewer panels and less film than a larger car.

How many generations of the Neon does this page cover?

This page covers two generations of the Dodge Neon. The first generation ran from 1994 to 1999 and offered a coupe and sedan. The second generation ran from 1999 to 2005 as a sedan only. Each generation has its own film estimate and body details in the sections above.