Wraps by car

Dodge Intrepid wrap

The Dodge Intrepid wrap page covers the first and second generations of the full-size sedan. These two generations share the same four-door body style but differ in length and film needs. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film.

2generations17.5 mof film for a full wrap

Dodge Intrepid, second generation, factory photo
Dodge Intrepid, second generation. Factory color shown.

Dodge Intrepid wrap colors and ideas

  • Intrepid black wrap
  • Intrepid white wrap
  • Intrepid gray wrap
  • Intrepid silver wrap
  • Intrepid red wrap
  • Intrepid blue wrap
  • Intrepid green wrap
  • Intrepid yellow wrap
  • Intrepid orange wrap
  • Intrepid purple wrap
  • Intrepid pink wrap
  • Intrepid teal wrap
  • Intrepid brown wrap
  • Intrepid gold wrap
  • Intrepid chrome wrap
  • Intrepid color shift wrap
  • Intrepid carbon fiber wrap
  • Intrepid camo and patterned wrap

How much vinyl to wrap a Dodge Intrepid

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2004sedan (4 doors)203.7 in (5,175 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1992–1997sedan (4 doors)201.7 in (5,124 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Intrepid wrap cost factors

Intrepid wrap cost depends on the film type, the condition of the paint, and the amount of disassembly the job needs. A color change wrap uses about 57 ft (17.5 m) of cast film on the second generation, while chrome or patterned film uses about 70 ft (21.5 m). Removing door handles, mirrors, and trim adds labor time but gives a cleaner edge. Paint correction before wrapping adds steps on a car of this age.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: sedan (4 doors).

Intrepid wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Intrepid, second generation, factory photo
Factory color shown

1997–2004 Intrepid sedan (second generation)

1997–2004sedan (4 doors)203.7 in (5,175 mm)

On a 1997–2004 Dodge Intrepid, paint age matters before a full wrap because panels may be original or repainted. A test spot on each panel shows whether the film will lift old clear coat or leave adhesive behind. The second generation is 203.7 in (5,175 mm) long and takes about 57 ft (17.5 m) of 60-inch film. The large flat doors and hood reward careful surface prep with a smooth finish.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Dodge Intrepid, first generation, factory photo
Factory color shown

1992–1997 Intrepid sedan (first generation)

1992–1997sedan (4 doors)201.7 in (5,124 mm)

The 1992–1997 Dodge Intrepid is a full-size sedan with a length of 201.7 in (5,124 mm), which makes the side panels the biggest film pieces on the car. The four doors, roof, hood, and trunk add up to about 56 ft (17 m) of 60-inch vinyl. The front and rear bumpers wrap as separate pieces, and the rocker panels need a narrow strip along both sides.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Intrepid

A partial wrap on an Intrepid can cover the roof, hood, or mirror caps in a contrasting color. Intrepid chrome delete covers the window trim and badges with black film for a monochrome look. Paint protection film in a clear finish can be applied to the front end only. These smaller jobs use less film than a full wrap and can be done panel by panel.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dodge Intrepid: body, cut-outs and film

A Dodge Intrepid vinyl wrap starts with a large sedan body that has four doors and a long roof. The second generation is 203.7 in (5,175 mm) long, and the first generation is 201.7 in (5,124 mm) long. Both bodies need full-length side panels, a wide hood, and a tall rear bumper. The generous flat surfaces help the film lay down, but the deep front and rear fascias add seams.

Intrepid wrap ideas should account for the door handles, mirrors, and the trim around the side windows. The side moldings and badges sit on the panels and are cleaner to remove before wrapping. The front bumper has wide lower openings and fog light pockets that need relief cuts. The trunk lid wraps around the tail lights, so a tucked edge there keeps the film from lifting.

How much vinyl to wrap an Intrepid differs slightly between the two generations. The second generation from 1997–2004 is about 203.7 in (5,175 mm) long and takes about 57 ft (17.5 m) of film. The first generation from 1992–1997 is shorter at 201.7 in (5,124 mm) and takes about 56 ft (17 m). For chrome or patterned film, both generations take about 70 ft (21.5 m) because of pattern matching.

Questions about wrapping a Dodge Intrepid

How much vinyl does it take to wrap a Dodge Intrepid?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap a second-generation Dodge Intrepid. That figure covers the full sedan body including the bumpers, mirrors, and door jambs. The first generation from 1992–1997 uses slightly less at about 56 ft (17 m). For chrome or patterned film, both generations need about 70 ft (21.5 m).

Can I wrap only the hood or the roof of an Intrepid?

Yes, an Intrepid hood or roof can be wrapped on its own as a partial wrap job. The roof is a single large panel that takes about one third of the full roof film width. The hood on both generations is flat and wide, so a single piece of 60-inch film covers it without seams. Mirror caps are also a small job that can be done in the same film.

Is an Intrepid hard to wrap?

An Intrepid is not especially hard to wrap, but its size and bumper shapes add work. The sedan body is over 200 inches long, so the side panels are tall and need a second pair of hands. The front and rear fascias have deep curves and openings that require relief cuts and inlays. The trim around the side windows sits close to the glass, so a tucked edge there takes patience.

How many generations of the Intrepid does this page cover?

This page covers two generations of the Dodge Intrepid. The first generation ran from 1992 to 1997, and the second generation ran from 1997 to 2004. Both are four-door sedans, but the second generation is about 2 inches longer.