Wraps by car

Dodge Journey wrap

The Dodge Journey wrap page covers the first-generation SUV produced from 2007 to 2016. A full vinyl wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases that figure to about 76 ft (23 m). This page explains the film amounts, body details and wrap options for the Journey.

1generations20 mof film for a full wrap

Dodge Journey, first generation, factory photo
Dodge Journey, first generation. Factory color shown.

Dodge Journey wrap colors and ideas

  • Journey black wrap
  • Journey white wrap
  • Journey gray wrap
  • Journey silver wrap
  • Journey red wrap
  • Journey blue wrap
  • Journey green wrap
  • Journey yellow wrap
  • Journey orange wrap
  • Journey purple wrap
  • Journey pink wrap
  • Journey teal wrap
  • Journey brown wrap
  • Journey gold wrap
  • Journey chrome wrap
  • Journey color shift wrap
  • Journey carbon fiber wrap
  • Journey camo and patterned wrap

How much vinyl to wrap a Dodge Journey

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2016SUV (5 doors)192.4 in (4,887 mm) to 192.4 in (4,888 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Journey wrap cost factors

Journey wrap cost depends on the film amount and the labor for this SUV. A full wrap uses about 66 ft (20 m) of 60-inch (1.52 m) cast film, or about 76 ft (23 m) for chrome or patterned film. The tailgate with its rear glass adds trimming time compared to a flat liftgate. The consistent body size keeps the material estimate steady across the generation.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2010: bumpers and lights differ between the versions, and so do the film cuts.

Journey wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Journey, first generation, factory photo
Factory color shown

2007–2016 Journey SUV (first generation)

2007–2016SUV (5 doors)192.4 in (4,887 mm) to 192.4 in (4,888 mm)

The first-generation Dodge Journey ran from 2007 to 2016 with a restyling in 2010. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. The body length remained at 192.4 in (4,887 mm) to 192.4 in (4,888 mm) through the whole run. If you order a pre-cut kit, match it to your Journey's production year.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Journey

A partial wrap on a Dodge Journey can cover the roof, hood or mirror caps. Journey chrome delete means covering the window trim and badges with black film. Paint protection film (PPF) on the front end uses clear film to guard against stone chips. These smaller jobs use less material than a full wrap and still change the look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dodge Journey: body, cut-outs and film

A Dodge Journey vinyl wrap works on a single five-door SUV body style. The body length stays at 192.4 in (4,887 mm) to 192.4 in (4,888 mm) across the generation. That consistent size means film cut for one Journey fits another with the same front and rear design. The tall roof and large side panels add square footage to the job.

Journey wrap ideas start with planning around the tailgate. The tailgate carries the rear glass in it, so the film ends at the edge of the glass. A wrap installer will trim carefully around that glass and remove badges for a clean finish. The door handles and mirrors also need film trimmed around their edges.

How much vinyl to wrap a Journey depends on which version of the SUV you have. The 2010 restyling changed the bumpers and lights, so film patterns from early cars do not fit later ones. The body length stayed the same, but the front and rear shapes mean you must choose the right cut. Counting film by the numbers above gives you a safe starting point.

Questions about wrapping a Dodge Journey

How much vinyl does it take to wrap a Dodge Journey?

A full Dodge Journey wrap takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the need to about 76 ft (23 m) for the same SUV. The body length of 192.4 in (4,887 mm) to 192.4 in (4,888 mm) stays the same across the generation. These figures cover the whole exterior, including the tailgate.

Which years of the Journey take the same film cuts?

The same film cuts fit a Journey built in the same version of the first generation. The original version covers 2007 to 2009, and the restyled version covers 2010 to 2016. The 2010 restyling changed the bumpers and lights, so cuts do not swap between the two. Check your production year before buying a pre-cut kit.

Can I wrap only the hood or the roof of a Journey?

Yes, you can wrap only the hood or the roof of a Journey. A partial wrap can cover the roof, hood or mirror caps by themselves. Journey chrome delete is another partial job that covers the window trim and badges. Paint protection film (PPF) on the front end is a clear partial wrap for protection.

Is a Journey hard to wrap?

The Journey adds a little work for a wrapper because of its tailgate. The tailgate has the rear glass in it, so the film must end at the edge of the glass. The SUV body is 192.4 in (4,887 mm) to 192.4 in (4,888 mm) long, with tall panels that take time to cover. A flat-sided body with separate glass is simpler, but the Journey is manageable.