Wraps by car

Dodge Nitro wrap

The Dodge Nitro wrap page covers the first generation SUV built from 2006 to 2011. This single-generation vehicle measures 180.5 inches (4,584 mm) in length. A full vinyl wrap of the Nitro body takes about 62 feet (19 meters) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 72 feet (22 meters) for complete coverage.

1generations19 mof film for a full wrap

Dodge Nitro, first generation, factory photo
Dodge Nitro, first generation. Factory color shown.

Dodge Nitro wrap colors and ideas

  • Nitro black wrap
  • Nitro white wrap
  • Nitro gray wrap
  • Nitro silver wrap
  • Nitro red wrap
  • Nitro blue wrap
  • Nitro green wrap
  • Nitro yellow wrap
  • Nitro orange wrap
  • Nitro purple wrap
  • Nitro pink wrap
  • Nitro teal wrap
  • Nitro brown wrap
  • Nitro gold wrap
  • Nitro chrome wrap
  • Nitro color shift wrap
  • Nitro carbon fiber wrap
  • Nitro camo and patterned wrap

How much vinyl to wrap a Dodge Nitro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2011SUV (5 doors)180.5 in (4,584 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Nitro wrap cost factors

The Nitro wrap cost depends on the amount of film, the number of cut-outs, and the time for the tall roof. The full body needs about 62 feet (19 meters) of standard film, or about 72 feet (22 meters) for chrome or patterned film. Fog lamp cut-outs in the front bumper and careful edging at the tailgate glass add labor. A partial wrap, such as just the hood and roof, uses less film and fewer hours.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Nitro wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Nitro, first generation, factory photo
Factory color shown

2006–2011 Nitro SUV (first generation)

2006–2011SUV (5 doors)180.5 in (4,584 mm)

The first generation Dodge Nitro, from 2006 to 2011, is the only generation this page covers. Its 69.1-inch (1,755 mm) height means the roof is wrapped from a platform and takes more time than a lower SUV. The five-door body has a tailgate with glass and fog lamps in every front bumper. These details affect the film estimate and the work involved in a full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.1 in (1,755 mm)): the roof is wrapped from a platform.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Nitro

A partial wrap on the Dodge Nitro can cover the roof, hood, and mirror caps without wrapping the whole SUV. Chrome delete on this model includes the window trim and badges, using black film to cover the bright metal. Paint protection film (PPF) is another option: clear film on the front end guards against stone chips. These smaller jobs use less material than a full vinyl wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dodge Nitro: body, cut-outs and film

The Dodge Nitro vinyl wrap follows the boxy five-door SUV shape that makes panel layout straightforward. The tall body stands 69.1 inches (1,755 mm) high, so installers work from a platform to reach the roof. The rear tailgate includes the glass, and film ends at the edge of that glass. Fog lamps in every trim sit in the front bumper and need cut-outs in the bumper film.

Nitro wrap ideas often start with color change on the large side panels and the tailgate. The tailgate has rear glass in it, so the film edge must align cleanly with the glass edge. Every trim has fog lamps in the front bumper, which means cutting openings in the film there. The roof sits high enough that a platform is needed for safe installation.

How much vinyl to wrap a Nitro depends mainly on the film type you choose. A standard cast film full wrap uses about 62 feet (19 meters) of 60-inch (1.52 m) material. Chrome or patterned film adds waste because patterns must match, so the estimate rises to about 72 feet (22 meters). The tall roof and large tailgate are the biggest single panels on this SUV.

Questions about wrapping a Dodge Nitro

How much vinyl does it take to wrap a Dodge Nitro?

A full Dodge Nitro wrap takes about 62 feet (19 meters) of 60-inch (1.52 m) cast film. For chrome or patterned film, the figure rises to about 72 feet (22 meters) because of pattern matching. The estimate covers the first generation SUV from 2006 to 2011 with its tall roof and tailgate.

Can I wrap only the hood or the roof of a Nitro?

Yes, you can wrap only the hood or the roof of a Nitro. A partial wrap in the catalog includes the roof, hood, and mirror caps as separate options. Chrome delete on the window trim and badges is another smaller job. Clear paint protection film on the front end is also possible without a full color change.

Is a Nitro hard to wrap?

The Nitro is not hard to wrap, but its tall body and specific parts add work. The roof stands at 69.1 inches (1,755 mm), so wrapping it from a platform takes extra time. The tailgate has rear glass in it, and the film must end exactly at the glass edge. Every trim has fog lamps in the front bumper, which require cut-outs in the film.

How many generations of the Nitro does this page cover?

This page covers one generation of the Dodge Nitro, built from 2006 to 2011. It is the only generation of the Nitro produced. The film estimate and wrap notes refer to that first generation body.