Wraps by car

Dodge Viper wrap

The Dodge Viper wrap page covers all five generations of the Dodge Viper, from 1992 to 2017. A full wrap of the fifth-generation Viper (2012–2017) coupe takes about 49 ft (15 m) of 60-inch (1.52 m) cast vinyl wrap. The Viper is a two-door sports car with a body length of about 175.7 in (4,463 mm) on the newest body. This guide explains film amounts, body-specific steps, and wrap options for each Viper generation.

5generations15 mof film for a full wrap

Dodge Viper, fifth generation, factory photo
Dodge Viper, fifth generation. Factory color shown.

Dodge Viper wrap colors and ideas

  • Viper black wrap
  • Viper white wrap
  • Viper gray wrap
  • Viper silver wrap
  • Viper red wrap
  • Viper blue wrap
  • Viper green wrap
  • Viper yellow wrap
  • Viper orange wrap
  • Viper purple wrap
  • Viper pink wrap
  • Viper teal wrap
  • Viper brown wrap
  • Viper gold wrap
  • Viper chrome wrap
  • Viper color shift wrap
  • Viper carbon fiber wrap
  • Viper camo and patterned wrap

How much vinyl to wrap a Dodge Viper

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2017coupe (2 doors)175.7 in (4,463 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2007–2010convertible, coupe (2 doors)175.6 in (4,460 mm) to 175.7 in (4,463 mm)about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)
2002–2007convertible, coupe (2 doors)175.6 in (4,459 mm) to 175.6 in (4,460 mm)about 46 ft (14 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)
1995–2002convertible, coupe (2 doors)175.1 in (4,448 mm) to 176.8 in (4,490 mm)about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m)
1992–1995convertible (2 doors)175.2 in (4,450 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Viper wrap cost factors

Viper wrap cost depends on the film amount, body style, and condition of the paint. A full wrap of a fifth-generation coupe uses about 49 ft (15 m) of film, while a fourth-generation convertible uses about 41 ft (12.5 m). The two long side doors are each one large piece of film, which affects labor. Paint correction before wrapping adds to the total if the finish is rough.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Viper wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Viper, fifth generation, factory photo
Factory color shown

2012–2017 Viper coupe (fifth generation)

2012–2017coupe (2 doors)175.7 in (4,463 mm)

The fifth-generation Dodge Viper (2012–2017) is a coupe with two long side doors, each wrapped as one large piece of film. A full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, or about 56 ft (17 m) if using chrome or patterned film. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Dodge Viper, fourth generation, factory photo
Factory color shown

2007–2010 Viper convertible, coupe (fourth generation)

2007–2010convertible, coupe (2 doors)175.6 in (4,460 mm) to 175.7 in (4,463 mm)

The fourth-generation Dodge Viper (2007–2010) came as a convertible and a coupe. On the convertible, the fabric top is not wrapped and the film ends where the top begins; a folding hard top is wrapped as panels of its own. The coupe needs about 49 ft (15 m) of 60-inch cast film, while the convertible needs about 41 ft (12.5 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Dodge Viper, third generation, factory photo
Factory color shown

2002–2007 Viper convertible, coupe (third generation)

2002–2007convertible, coupe (2 doors)175.6 in (4,459 mm) to 175.6 in (4,460 mm)

The third-generation Dodge Viper (2002–2007) was offered as a convertible and a coupe. The body style decides the panel plan and the film amount: the coupe takes about 49 ft (15 m) of 60-inch cast film, the convertible about 46 ft (14 m). On convertibles, a fabric top is not wrapped, and a folding hard top is wrapped as separate panels.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Dodge Viper, second generation, factory photo
Factory color shown

1995–2002 Viper convertible, coupe (second generation)

1995–2002convertible, coupe (2 doors)175.1 in (4,448 mm) to 176.8 in (4,490 mm)

The second-generation Dodge Viper (1995–2002) is a convertible or coupe with a body length from 175.1 in (4,448 mm) to 176.8 in (4,490 mm). The coupe takes about 49 ft (15 m) of 60-inch cast film, while the convertible takes about 43 ft (13 m). The two long side doors are each one large piece of film, keeping the panel count low.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 49 ft (15 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 56 ft (17 m).

Dodge Viper, first generation, factory photo
Factory color shown

1992–1995 Viper convertible (first generation)

1992–1995convertible (2 doors)175.2 in (4,450 mm)

The first-generation Dodge Viper (1992–1995) is a convertible with a body length of 175.2 in (4,450 mm). A full wrap takes about 43 ft (13 m) of 60-inch cast film, or about 48 ft (14.5 m) with chrome or patterned film. The fabric top is not wrapped, so the film ends where the top begins.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Viper

A partial wrap on a Dodge Viper can cover the roof, hood, or mirror caps. Viper chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap and can be done on any generation.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dodge Viper: body, cut-outs and film

A Dodge Viper vinyl wrap follows the car's two long side doors and compact sports car body. Each door is one large piece of film, so a full wrap uses a small number of large panels. The fifth-generation coupe is 175.7 in (4,463 mm) long, and a full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Convertible bodies from other generations need less film because the fabric top is not wrapped.

Viper wrap ideas include color change wraps, chrome delete, and paint protection film (PPF). A color change wrap covers the painted body panels, while chrome delete uses black film on bright trim and badges. PPF is a clear film applied to the front end to protect against stone chips. On Viper convertibles, the fabric top is not wrapped and the film ends where the top begins.

How much vinyl to wrap a Viper depends on the generation and body style. The fifth-generation coupe needs about 49 ft (15 m) of 60-inch (1.52 m) cast film, while a fourth-generation convertible needs about 41 ft (12.5 m). A chrome or patterned film adds about 10–15 percent to the film amount. The first-generation convertible takes about 43 ft (13 m) of cast film.

Questions about wrapping a Dodge Viper

How much vinyl does it take to wrap a Dodge Viper?

How much vinyl does it take to wrap a Dodge Viper? A full wrap of the newest Viper body, the fifth-generation coupe from 2012–2017, takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Viper?

Can I wrap only the hood or the roof of a Viper? Yes, a partial wrap can cover the roof, hood, or mirror caps on any Dodge Viper.

Is a Viper hard to wrap?

Is a Viper hard to wrap? The Dodge Viper is not the hardest car to wrap, but its two long side doors mean each door is one large piece of film, which takes care to lay down smoothly.

How many generations of the Viper does this page cover?

How many generations of the Viper does this page cover? This page covers all five generations of the Dodge Viper, from the first generation (1992–1995) to the fifth generation (2012–2017).