Wraps by car

Dodge Daytona wrap

This page covers the Dodge Daytona wrap in one generation from 1984 to 1993. A full vinyl wrap of the newest hatchback body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) for a total of about 59 ft (18 m).

1generations16 mof film for a full wrap

Dodge Daytona, first generation, factory photo
Dodge Daytona, first generation. Factory color shown.

Dodge Daytona wrap colors and ideas

  • Daytona black wrap
  • Daytona white wrap
  • Daytona gray wrap
  • Daytona silver wrap
  • Daytona red wrap
  • Daytona blue wrap
  • Daytona green wrap
  • Daytona yellow wrap
  • Daytona orange wrap
  • Daytona purple wrap
  • Daytona pink wrap
  • Daytona teal wrap
  • Daytona brown wrap
  • Daytona gold wrap
  • Daytona chrome wrap
  • Daytona color shift wrap
  • Daytona carbon fiber wrap
  • Daytona camo and patterned wrap

How much vinyl to wrap a Dodge Daytona

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1993hatchback (3 doors)179.5 in (4,560 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Daytona wrap cost factors

Daytona wrap cost depends on the size of the panels and the condition of the paint. The car is a compact hatchback with long doors and a tailgate, so most of the work is on flat and curved panels. Paint that is original or repainted may need a test spot before the full wrap. Film choice also matters because cast film and chrome or patterned film are not the same amount of material.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Daytona wraps by generation

Swipe sideways. Tap a card for the full description.

Dodge Daytona, first generation, factory photo
Factory color shown

1984–1993 Daytona hatchback (first generation)

1984–1993hatchback (3 doors)179.5 in (4,560 mm)

The first generation Dodge Daytona (1984–1993) is a hatchback with paint that may be original or repainted after all these years. Before a full wrap, a test spot on a hidden area shows whether the film will stick well to the paint. If the paint is weak or lifting, the wrap will not bond as it should.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Daytona

A partial wrap on a Dodge Daytona can cover the roof, hood, or mirror caps without wrapping the whole car. Chrome delete covers the window trim and badges with black film for a different look. Paint protection film (PPF) is another option, with clear film on the front end to shield the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Dodge Daytona: body, cut-outs and film

The Dodge Daytona vinyl wrap fits a compact three-door hatchback that is 179.5 in (4,560 mm) long. The single body style means every panel is sized the same across all years. Side panels and the tailgate are the largest surfaces, so they use most of the film. A full wrap on this car needs about 52 ft (16 m) of 60-inch (1.52 m) film.

Daytona wrap ideas start with the tailgate, where the film ends at the edge of the rear glass because the glass is set into the hatch. The two long side doors each take one large piece of film, which keeps seams away from the middle of the door. The front bumper and mirrors are separate pieces that need careful trimming.

To work out how much vinyl to wrap a Daytona, the only generation is the 1984–1993 hatchback, so film needs do not change between model years. The body length of 179.5 in (4,560 mm) stays the same for every car on this page. A full wrap always uses about 52 ft (16 m) of 60-inch (1.52 m) cast film.

Questions about wrapping a Dodge Daytona

How much vinyl does it take to wrap a Dodge Daytona?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Dodge Daytona. That figure covers the full hatchback body of the 1984–1993 generation. If you use chrome or patterned film, plan for about 59 ft (18 m).

Can I wrap only the hood or the roof of a Daytona?

Yes, you can wrap only the hood or the roof of a Daytona. A partial wrap on this car often covers the roof, hood, or mirror caps. Chrome delete is another smaller job for the window trim and badges.

Is a Daytona hard to wrap?

A Daytona is not the easiest car to wrap, mainly because of the tailgate with the rear glass in it. The film has to end cleanly at the edge of the glass, which takes extra care. The two long side doors each need one large piece of film, so they add time as well.

How many generations of the Daytona does this page cover?

This page covers one generation of the Dodge Daytona, from 1984 to 1993. That single generation is a compact hatchback with the same body for every year.