Wraps by car

Lincoln Aviator wrap

The Lincoln Aviator wrap page covers both generations of the Aviator SUV and the film needed for a full wrap of the newest body. The current, second generation has been in production since 2018, while the first generation ran from 2002 to 2005. This page includes sizes, wrap details, and answers to common questions about wrapping an Aviator. For the latest model, a full vinyl wrap takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

2generations20.5 mof film for a full wrap

Lincoln Aviator, second generation, factory photo
Lincoln Aviator, second generation. Factory color shown.

Lincoln Aviator wrap colors and ideas

  • Aviator black wrap
  • Aviator white wrap
  • Aviator gray wrap
  • Aviator silver wrap
  • Aviator red wrap
  • Aviator blue wrap
  • Aviator green wrap
  • Aviator yellow wrap
  • Aviator orange wrap
  • Aviator purple wrap
  • Aviator pink wrap
  • Aviator teal wrap
  • Aviator brown wrap
  • Aviator gold wrap
  • Aviator chrome wrap
  • Aviator color shift wrap
  • Aviator carbon fiber wrap
  • Aviator camo and patterned wrap

How much vinyl to wrap a Lincoln Aviator

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–nowSUV (5 doors)199.3 in (5,062 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
2002–2005SUV (5 doors)193.3 in (4,909 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Aviator wrap cost factors

An Aviator wrap cost depends on film choice, labor, and the vehicle's condition. The second generation uses about 67 ft (20.5 m) of standard film or 87 ft (26.5 m) of patterned film, which affects material expense. The first generation needs slightly less, at 66 ft (20 m) or 82 ft (25 m). Additional work like chrome delete or paint protection film on the front end adds to the total.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (69.6 in (1,768 mm)): the roof is wrapped from a platform.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Aviator wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln Aviator, second generation, factory photo
Factory color shown

2018–now Aviator SUV (second generation)

2018–nowSUV (5 doors)199.3 in (5,062 mm)

The second generation Lincoln Aviator was restyled in 2024, changing the bumpers and lights. Film cut for a 2018–2023 Aviator will not fit a 2024 or later model without adjustment. When ordering pre-cut kits, confirm whether they are for the pre- or post-restyling body. For full wraps, installers trim on the car, so the restyling mainly affects patterned designs and pre-cut partial pieces.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (69.6 in (1,768 mm)): the roof is wrapped from a platform.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Lincoln Aviator, first generation, factory photo
Factory color shown

2002–2005 Aviator SUV (first generation)

2002–2005SUV (5 doors)193.3 in (4,909 mm)

The first generation Lincoln Aviator was built from 2002 to 2005, and paint age is a key factor before wrapping. Panels on a car of these years may be original, repainted, or have clear coat damage, so a test spot is essential. The installer will check adhesion on several areas before committing to a full wrap. Any paint repairs should be completed and cured before the vinyl is applied.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on an Aviator

Partial wraps on the Lincoln Aviator include the roof, hood, and mirror caps as separate jobs. An Aviator chrome delete covers the window trim and badges with black film for a monochrome look. Clear paint protection film on the front end guards against stone chips without changing the color. These smaller jobs use less film and are a way to change the appearance without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln Aviator: body, cut-outs and film

A Lincoln Aviator vinyl wrap must account for the tall SUV body and a tailgate that includes the rear glass. The second generation is 199.3 in (5,062 mm) long and 69.6 in (1,768 mm) tall, so the roof requires a platform for safe installation. The first generation is slightly shorter at 193.3 in (4,909 mm) but taller at 70.9 in (1,800 mm). Both are five-door SUVs with large side panels that benefit from a two-person install.

Aviator wrap ideas often start with addressing the tailgate, where the film ends at the edge of the rear glass. The tall body means the roof is wrapped from a platform rather than from the ground. For chrome delete, the window trim and badges are covered with black film. Paint protection film on the front end is a popular partial option for newer Aviators.

How much vinyl to wrap an Aviator depends on the generation, but the difference is modest. The second generation needs about 67 ft (20.5 m) of standard cast film, while the first generation takes about 66 ft (20 m). If you choose chrome or patterned film, the second generation uses about 87 ft (26.5 m) and the first about 82 ft (25 m). The extra film accounts for matching patterns across the larger roof and body panels.

Questions about wrapping a Lincoln Aviator

How much vinyl does it take to wrap a Lincoln Aviator?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to fully wrap a second generation Lincoln Aviator. That figure covers the exterior painted surfaces with standard film, not chrome or patterned film. The first generation needs slightly less, about 66 ft (20 m). Always have extra film on hand for mistakes and complex areas.

Which years of the Aviator take the same film cuts?

The same film cuts fit the Lincoln Aviator within each generation, except for the 2024 restyling. For the second generation, films cut for 2018–2023 models do not fit 2024 and later models because the bumpers and lights changed. The first generation (2002–2005) uses one set of cuts throughout its run. Between the two generations, the bodies differ enough that film is not interchangeable.

Can I wrap only the hood or the roof of an Aviator?

Yes, you can wrap only the hood or the roof of an Aviator as a partial job. The roof wrap on these SUVs is done from a platform because the body is tall. Hood wraps are straightforward and use a manageable amount of film. Mirror caps are another small area that can be done alone or with other pieces.

Is an Aviator hard to wrap?

An Aviator is not especially hard to wrap, but its size and tailgate add labor. The tailgate includes the rear glass, so the film edge must be carefully finished at the glass line. The roof is high, requiring a platform for safe and precise installation. Both generations are large SUVs, so a full wrap takes more time and film than a smaller vehicle.