Wraps by car

Lincoln Mark VIII wrap

The Lincoln Mark VIII wrap is a large color change job on a car that runs 207.3 in (5,265 mm) from bumper to bumper. This page covers the single first generation, produced from 1992 to 1998. A full vinyl wrap of that coupe takes about 56 ft (17 m) of 60-inch (1.52 m) cast film, or about 70 ft (21.5 m) of chrome or patterned film.

1generations17 mof film for a full wrap

Lincoln Mark VIII, first generation, factory photo
Lincoln Mark VIII, first generation. Factory color shown.

Lincoln Mark VIII wrap colors and ideas

  • Mark VIII black wrap
  • Mark VIII white wrap
  • Mark VIII gray wrap
  • Mark VIII silver wrap
  • Mark VIII red wrap
  • Mark VIII blue wrap
  • Mark VIII green wrap
  • Mark VIII yellow wrap
  • Mark VIII orange wrap
  • Mark VIII purple wrap
  • Mark VIII pink wrap
  • Mark VIII teal wrap
  • Mark VIII brown wrap
  • Mark VIII gold wrap
  • Mark VIII chrome wrap
  • Mark VIII color shift wrap
  • Mark VIII carbon fiber wrap
  • Mark VIII camo and patterned wrap

How much vinyl to wrap a Lincoln Mark VIII

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1992–1998coupe (2 doors)207.3 in (5,265 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Mark VIII wrap cost factors

Mark VIII wrap cost depends on the size of the car and the film you choose, not on paint color or trim level. The car's 207.3 in (5,265 mm) length and long door panels add labor time compared with a compact coupe. Cast film uses about 56 ft (17 m), while a chrome or patterned film uses about 70 ft (21.5 m) and costs more per unit. A shop also quotes for removing and reinstalling trim pieces such as bumpers and mirrors.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mark VIII wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln Mark VIII, first generation, factory photo
Factory color shown

1992–1998 Mark VIII coupe (first generation)

1992–1998coupe (2 doors)207.3 in (5,265 mm)

The 1992–1998 Lincoln Mark VIII is a personal luxury coupe with a long hood and a low roofline. Paint age on a car of these years is the first thing to check: panels may be original or repainted, and a test spot comes before a full wrap. Because the body has only two doors, each side is one large canvas that must be handled as a single piece.

Two long side doors: each door is one large piece of film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Mark VIII

A partial wrap on the Mark VIII covers the roof, hood, or mirror caps separately, and it uses far less film than a full wrap. A Mark VIII chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF), a clear film on the front end, guards the nose and leading hood edge against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln Mark VIII: body, cut-outs and film

A Lincoln Mark VIII vinyl wrap covers a two-door luxury coupe with long side panels and a long roof. The body has no separate door handles or roof gutters to work around, so the main surfaces are clean and open. The car's length of 207.3 in (5,265 mm) makes every horizontal panel longer than on many modern coupes, which means more film per panel and careful positioning.

For Mark VIII wrap ideas, the two long side doors are each one large piece of film, which rewards a patient installer and limits seams. The front and rear bumpers, mirrors, and side moldings are removed where possible so film edges wrap behind them. The door handles and badges are removed for a clean finish, and the window trim can be covered for a chrome delete.

When counting how much vinyl to wrap a Mark VIII, know that only the 1992–1998 coupe is in this catalog. There are no earlier or later body styles to compare, so the film estimate stays the same for every year. The only real difference is paint condition, because a car of these years may have original or repainted panels.

Questions about wrapping a Lincoln Mark VIII

How much vinyl does it take to wrap a Lincoln Mark VIII?

Yes, a Lincoln Mark VIII takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap, or about 70 ft (21.5 m) of chrome or patterned film. The exact amount depends on how much waste the installer allows for the long doors and bumpers.

Can I wrap only the hood or the roof of a Mark VIII?

Yes, you can wrap only the hood or the roof of a Mark VIII, and the same goes for the mirror caps. These partial wrap jobs use less film and cost less labor than a full body wrap. A shop can also do a chrome delete on the window trim and badges.

Is a Mark VIII hard to wrap?

The Mark VIII is not hard to wrap if you plan for its size and its long two-door body. Each side door is one large piece of film, so you need a clean, dust-free space and a second pair of hands. The car's 207.3 in (5,265 mm) length means the roof and quarter panels are longer than average, which adds time and care.

How many generations of the Mark VIII does this page cover?

This page covers one generation of the Lincoln Mark VIII, the first generation built from 1992 to 1998. There is no second generation in this catalog, so every body detail and film estimate on this page refers to that single coupe.