Wraps by car

Lincoln Blackwood wrap

The Lincoln Blackwood wrap page covers the 2001–2002 Lincoln Blackwood, a single-generation pickup with four doors. A vinyl wrap on this vehicle changes its color and protects the original paint. The full body uses about 72 ft (22 m) of 60-inch (1.52 m) cast film, or 84 ft (25.5 m) if you choose chrome or patterned film.

1generations22 mof film for a full wrap

Lincoln Blackwood, first generation, factory photo
Lincoln Blackwood, first generation. Factory color shown.

Lincoln Blackwood wrap colors and ideas

  • Blackwood black wrap
  • Blackwood white wrap
  • Blackwood gray wrap
  • Blackwood silver wrap
  • Blackwood red wrap
  • Blackwood blue wrap
  • Blackwood green wrap
  • Blackwood yellow wrap
  • Blackwood orange wrap
  • Blackwood purple wrap
  • Blackwood pink wrap
  • Blackwood teal wrap
  • Blackwood brown wrap
  • Blackwood gold wrap
  • Blackwood chrome wrap
  • Blackwood color shift wrap
  • Blackwood carbon fiber wrap
  • Blackwood camo and patterned wrap

How much vinyl to wrap a Lincoln Blackwood

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2002pickup (4 doors)220.2 in (5,593 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m)

Blackwood wrap cost factors

Blackwood wrap cost depends on the size and the body style, because the truck is a long pickup at 220.2 in (5,593 mm). The cab and bed are wrapped as two bodies, which adds labor to the job. Film choice changes the amount of material, from about 72 ft (22 m) to 84 ft (25.5 m), and custom cut-outs on tall sections add time.

  • Film for a full wrap: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (73.6 in (1,869 mm)): the roof is wrapped from a platform.

Blackwood wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln Blackwood, first generation, factory photo
Factory color shown

2001–2002 Blackwood pickup (first generation)

2001–2002pickup (4 doors)220.2 in (5,593 mm)

The first generation Lincoln Blackwood, sold in 2001–2002, is the only generation of this pickup. Its pickup bed means the cab and the bed are two bodies for the film, and the inside of the bed stays bare. The tailgate and the rear bumper are wrapped as part of the bed section, with care around the lettering.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (73.6 in (1,869 mm)): the roof is wrapped from a platform.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 84 ft (25.5 m).

Roof, hood, chrome delete and PPF on a Blackwood

A partial wrap on a Blackwood covers the roof, hood, or mirror caps without wrapping the whole truck. Blackwood chrome delete replaces bright trim with black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln Blackwood: body, cut-outs and film

A Lincoln Blackwood vinyl wrap is planned around the pickup body style, which has a separate cab and bed. The truck is 220.2 in (5,593 mm) long, so the installer works on two body sections. The tall body at 73.6 in (1,869 mm) means the roof is wrapped from a platform, not a step ladder.

Blackwood wrap ideas often start with the chrome trim, because chrome delete uses black film on window trim and badges. The pickup bed is treated as a second body, and its inside stays bare. Door handles, mirrors, and the tailgate are removed or wrapped in place, depending on the film and finish.

To know how much vinyl to wrap a Blackwood, compare the single generation sold in 2001–2002. The pickup body style has not changed, so the film estimate stays the same for all Blackwoods. A full wrap needs about 72 ft (22 m) of standard cast film, while chrome or patterned film uses about 84 ft (25.5 m).

Questions about wrapping a Lincoln Blackwood

How much vinyl does it take to wrap a Lincoln Blackwood?

Yes, a Lincoln Blackwood takes about 72 ft (22 m) of 60-inch (1.52 m) cast film for a standard color change wrap. If you choose chrome or patterned film, the amount goes up to about 84 ft (25.5 m). These numbers cover the full exterior of the 220.2 in (5,593 mm) pickup, excluding the inside of the bed.

Is the bed of a Blackwood wrapped?

No, the inside of the Blackwood bed is not wrapped. The bed is treated as a separate body from the cab, so only the outside surfaces get film. The inside stays bare because it is a cargo area and film would not hold up to loading and abrasion.

Can I wrap only the hood or the roof of a Blackwood?

Yes, you can wrap only the hood or the roof of a Blackwood as a partial wrap. Other small jobs are the mirror caps or a chrome delete on the window trim and badges. A partial wrap uses less film and costs less in labor than a full wrap.

Is a Blackwood hard to wrap?

The Blackwood is harder to wrap than a standard sedan because it is a tall pickup. Its 73.6 in (1,869 mm) height means the roof needs a platform for safe installation. The separate pickup bed adds time, because the cab and the bed are wrapped as two bodies with many edges and cut-outs.