Wraps by car

Lincoln MKT wrap

The Lincoln MKT wrap covers this SUV from 2009–2019, a single generation in the catalog. A vinyl wrap of the newest body takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, plan for about 82 ft (25 m).

1generations21.5 mof film for a full wrap

Lincoln MKT, first generation, factory photo
Lincoln MKT, first generation. Factory color shown.

Lincoln MKT wrap colors and ideas

  • Lincoln MKT black wrap
  • Lincoln MKT white wrap
  • Lincoln MKT gray wrap
  • Lincoln MKT silver wrap
  • Lincoln MKT red wrap
  • Lincoln MKT blue wrap
  • Lincoln MKT green wrap
  • Lincoln MKT yellow wrap
  • Lincoln MKT orange wrap
  • Lincoln MKT purple wrap
  • Lincoln MKT pink wrap
  • Lincoln MKT teal wrap
  • Lincoln MKT brown wrap
  • Lincoln MKT gold wrap
  • Lincoln MKT chrome wrap
  • Lincoln MKT color shift wrap
  • Lincoln MKT carbon fiber wrap
  • Lincoln MKT camo and patterned wrap

How much vinyl to wrap a Lincoln MKT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2019SUV (5 doors)207.6 in (5,273 mm)about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m)

Lincoln MKT wrap cost factors

The Lincoln MKT wrap cost depends on the film area of this 207.6 in (5,273 mm) SUV. Chrome or patterned film adds material, about 82 ft (25 m) against 70 ft (21.5 m) for cast film. The tailgate glass cut-out and a full color change also add labor time.

  • Film for a full wrap: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 2012: bumpers and lights differ between the versions, and so do the film cuts.

Lincoln MKT wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln MKT, first generation, factory photo
Factory color shown

2009–2019 Lincoln MKT SUV (first generation)

2009–2019SUV (5 doors)207.6 in (5,273 mm)

The first generation Lincoln MKT was built from 2009 to 2019 and restyled in 2012. Bumpers and lights changed with the restyling, so film cut for one version does not fit the other. A wrapper should note the production date before cutting panels.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 70 ft (21.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Lincoln MKT

A partial wrap on the Lincoln MKT covers the roof, hood, or mirror caps instead of the whole body. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln MKT: body, cut-outs and film

The Lincoln MKT vinyl wrap must fit a 207.6 in (5,273 mm) long SUV with five doors. The tall body and large panels add film area compared with a sedan. A full wrap uses about 70 ft (21.5 m) of cast film, and any chrome or pattern raises the total.

Lincoln MKT wrap ideas include a full color change or a two-tone layout with the roof in a contrasting film. The tailgate has the rear glass in it, so the film ends at the edge of the glass. That edge needs careful trimming to keep the line clean.

How much vinyl to wrap a Lincoln MKT stays the same for the whole generation because the body dimensions did not change. The restyling in 2012 altered the bumpers and lights, but the main panels kept the same shape. A shop counting film for one version can use the same total for the other.

Questions about wrapping a Lincoln MKT

How much vinyl does it take to wrap a Lincoln MKT?

It takes about 70 ft (21.5 m) of 60-inch (1.52 m) cast film to wrap a Lincoln MKT. If you use chrome or patterned film, plan for about 82 ft (25 m).

Which years of the Lincoln MKT take the same film cuts?

The Lincoln MKT years 2009 to 2019 take the same film cuts for the main panels. The 2012 restyling changed the bumpers and lights, so those parts differ before and after 2012.

Can I wrap only the hood or the roof of a Lincoln MKT?

Yes, you can wrap only the hood or the roof of a Lincoln MKT. A partial wrap covers one or more of these panels without doing the whole vehicle.

Is a Lincoln MKT hard to wrap?

A Lincoln MKT is not especially hard to wrap, but two details add work. The tailgate has the rear glass in it, so the film must end at the glass edge. The 207.6 in (5,273 mm) body also means large panels to handle.