Wraps by car

Lincoln Premiere wrap

The Lincoln Premiere wrap page covers the 1955–1960 first generation in convertible, coupe, and sedan styles. A full vinyl wrap of this car takes about 61 ft (18.5 m) for the convertible to 70 ft (21.5 m) for the sedan. This guide explains how the body affects film use and what a wrap involves.

1generations18.5 mof film for a full wrap

Lincoln Premiere, first generation, factory photo
Lincoln Premiere, first generation. Factory color shown.

Lincoln Premiere wrap colors and ideas

  • Premiere black wrap
  • Premiere white wrap
  • Premiere gray wrap
  • Premiere silver wrap
  • Premiere red wrap
  • Premiere blue wrap
  • Premiere green wrap
  • Premiere yellow wrap
  • Premiere orange wrap
  • Premiere purple wrap
  • Premiere pink wrap
  • Premiere teal wrap
  • Premiere brown wrap
  • Premiere gold wrap
  • Premiere chrome wrap
  • Premiere color shift wrap
  • Premiere carbon fiber wrap
  • Premiere camo and patterned wrap

How much vinyl to wrap a Lincoln Premiere

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1955–1960convertible, coupe, sedan (2 or 4 doors)223.0 in (5,664 mm)about 61 ft (18.5 m) for the convertible to 70 ft (21.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m)

Premiere wrap cost factors

Premiere wrap cost is built from film quantity, body style, and labor. A sedan needs about 70 ft (21.5 m) of film while a convertible needs about 61 ft (18.5 m). Chrome or patterned film can raise the total to about 82 ft (25 m). The 223.0 in (5,664 mm) body length also adds time to surface preparation and installation.

  • Film for a full wrap: about 61 ft (18.5 m) for the convertible to 70 ft (21.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).
  • Body: convertible, coupe, sedan (2 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Premiere wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln Premiere, first generation, factory photo
Factory color shown

1955–1960 Premiere convertible, coupe, sedan (first generation)

1955–1960convertible, coupe, sedan (2 or 4 doors)223.0 in (5,664 mm)

The open top of the Lincoln Premiere is treated differently in a full wrap. A fabric top is not wrapped and the film ends where the top begins, so the edge is finished along that line. A folding hard top is wrapped as panels of its own, with seams at the panel gaps. This keeps the wrap even when the top is raised or lowered.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 61 ft (18.5 m) for the convertible to 70 ft (21.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 82 ft (25 m).

Roof, hood, chrome delete and PPF on a Premiere

Premiere chrome delete covers window trim and badges with black film, and a partial wrap can cover the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less film than a full wrap and can be done on any body style. They are a way to change the look without wrapping the whole 223.0 in (5,664 mm) body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln Premiere: body, cut-outs and film

A Lincoln Premiere vinyl wrap follows the long 223.0 in (5,664 mm) body, so film use is higher than on many cars. The convertible needs the least film at about 61 ft (18.5 m) because the top is not wrapped. Sedans take up to 70 ft (21.5 m) with their fixed roof and larger rear quarters. Two-door models fall between these figures depending on trim and details.

Premiere wrap ideas start with the parts that must be cut around or removed. Door handles, badges, and trim pieces come off for a clean install around them. The convertible body has a fabric top that is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own, so the installer treats it as separate sections.

How much vinyl to wrap a Premiere depends on body style and film width. Using 60-inch (1.52 m) cast film, a convertible takes about 61 ft (18.5 m) and a sedan about 70 ft (21.5 m). Chrome or patterned film adds up to about 82 ft (25 m) because the pattern must be matched. The first generation is the only one in this catalog, so these figures cover all 1955–1960 Premiere cars.

Questions about wrapping a Lincoln Premiere

How much vinyl does it take to wrap a Lincoln Premiere?

A Lincoln Premiere takes about 61 ft (18.5 m) to 70 ft (21.5 m) of 60-inch (1.52 m) cast film for a full wrap. The convertible uses the lower figure and the sedan uses the higher one. Chrome or patterned film may need up to about 82 ft (25 m).

Is the top of a Premiere wrapped?

The top of a Premiere is not wrapped when it is a fabric convertible top. The film ends where the fabric begins. If the car has a folding hard top, that top is wrapped as panels of its own.

Which Premiere body takes more film?

The sedan takes more film than the convertible or coupe. A sedan uses about 70 ft (21.5 m) while a convertible uses about 61 ft (18.5 m). The fixed roof and larger rear body of the sedan account for the difference.

Can I wrap only the hood or the roof of a Premiere?

Yes, you can wrap only the hood or the roof of a Premiere. A partial wrap may cover the roof, hood, or mirror caps. Chrome delete on window trim and badges is another small job. This uses less film than a full wrap and works on any body style.