Wraps by car

Lincoln Mark LT wrap

A Lincoln Mark LT wrap gives the pickup a new look in vinyl. The catalog covers two generations of this four-door pickup. A full wrap of the newest body takes about 72 ft (22 m) of 60-inch (1.52 m) cast film.

2generations22 mof film for a full wrap

Lincoln Mark LT, second generation, factory photo
Lincoln Mark LT, second generation. Factory color shown.

Lincoln Mark LT wrap colors and ideas

  • Mark LT black wrap
  • Mark LT white wrap
  • Mark LT gray wrap
  • Mark LT silver wrap
  • Mark LT red wrap
  • Mark LT blue wrap
  • Mark LT green wrap
  • Mark LT yellow wrap
  • Mark LT orange wrap
  • Mark LT purple wrap
  • Mark LT pink wrap
  • Mark LT teal wrap
  • Mark LT brown wrap
  • Mark LT gold wrap
  • Mark LT chrome wrap
  • Mark LT color shift wrap
  • Mark LT carbon fiber wrap
  • Mark LT camo and patterned wrap

How much vinyl to wrap a Lincoln Mark LT

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2014pickup (4 doors)223.8 in (5,685 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)
2005–2009pickup (4 doors)223.8 in (5,685 mm)about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Mark LT wrap cost factors

A Mark LT wrap cost depends on the film and the labor for its large body. The pickup is 223.8 in (5,685 mm) long and 73.5 in (1,867 mm) tall, so installers work with a platform. The cab and the bed are two bodies, which adds time for trimming and seams.

  • Film for a full wrap: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • A tall body (73.5 in (1,867 mm)): the roof is wrapped from a platform.

Mark LT wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln Mark LT, second generation, factory photo
Factory color shown

2009–2014 Mark LT pickup (second generation)

2009–2014pickup (4 doors)223.8 in (5,685 mm)

The second generation of the Lincoln Mark LT has the pickup bed as two bodies for the film. The cab and the bed are wrapped separately, and the inside of the bed stays bare. This generation from 2009–2014 shares the same size as the earlier one.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (73.5 in (1,867 mm)): the roof is wrapped from a platform.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Lincoln Mark LT, first generation, factory photo
Factory color shown

2005–2009 Mark LT pickup (first generation)

2005–2009pickup (4 doors)223.8 in (5,685 mm)

The first generation of the Lincoln Mark LT wraps with attention to paint age. On a car of these years panels may be original or repainted. A test spot comes before a full wrap to avoid lifting old paint.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

A tall body (73.5 in (1,867 mm)): the roof is wrapped from a platform.

Film: about 72 ft (22 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Mark LT

A partial wrap on a Lincoln Mark LT covers only chosen panels. You can wrap the roof, the hood, or the mirror caps alone. A chrome delete covers window trim and badges with black film. Clear paint protection film (PPF) can be applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln Mark LT: body, cut-outs and film

A Lincoln Mark LT vinyl wrap is planned around its 223.8 in (5,685 mm) body. The cab and the bed are wrapped as two separate bodies, which adds seams. The tall body of 73.5 in (1,867 mm) requires a platform for the roof.

Mark LT wrap ideas start with covering the whole pickup in one color. The cab and the bed are two bodies, and the inside of the bed stays bare. The roof and the tall sides need extra care from a platform.

Knowing how much vinyl to wrap a Mark LT helps you plan the job. For both generations the same size means about 72 ft (22 m) of 60-inch (1.52 m) cast film. A chrome or patterned film uses about 85 ft (26 m) because the pattern must be matched.

Questions about wrapping a Lincoln Mark LT

How much vinyl does it take to wrap a Lincoln Mark LT?

About 72 ft (22 m) of 60-inch (1.52 m) cast film is needed to wrap a Lincoln Mark LT. This estimate is for the newest body, which is the same size for both generations. A chrome or patterned film takes about 85 ft (26 m).

Is the bed of a Mark LT wrapped?

The bed of a Mark LT is not wrapped on the inside. The cab and the bed are wrapped as two separate bodies. Only the outside surfaces of the bed receive film.

Can I wrap only the hood or the roof of a Mark LT?

Yes, you can wrap only the hood or the roof of a Mark LT. A partial wrap covers the roof, the hood, or the mirror caps. These smaller jobs use less film than a full wrap.

Is a Mark LT hard to wrap?

A Mark LT is not the easiest vehicle to wrap because of its size and body shape. The tall body of 73.5 in (1,867 mm) means the roof is wrapped from a platform. The pickup bed is wrapped as a separate body, which adds more cutting and joining.