Wraps by car

Lincoln Capri wrap

The Lincoln Capri wrap covers the 1952–1959 first generation of this full-size car. This generation of the Capri is the only one covered in this catalog. A full wrap of the newest body takes about 64 ft (19.5 m) for the convertible to 66 ft (20 m) for the coupe, using 60-inch (1.52 m) cast film. The wrap can be done in a color change, a chrome delete, or a clear paint protection film.

1generations19.5 mof film for a full wrap

Lincoln Capri, first generation, factory photo
Lincoln Capri, first generation. Factory color shown.

Lincoln Capri wrap colors and ideas

  • Capri black wrap
  • Capri white wrap
  • Capri gray wrap
  • Capri silver wrap
  • Capri red wrap
  • Capri blue wrap
  • Capri green wrap
  • Capri yellow wrap
  • Capri orange wrap
  • Capri purple wrap
  • Capri pink wrap
  • Capri teal wrap
  • Capri brown wrap
  • Capri gold wrap
  • Capri chrome wrap
  • Capri color shift wrap
  • Capri carbon fiber wrap
  • Capri camo and patterned wrap

How much vinyl to wrap a Lincoln Capri

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1952–1959convertible, coupe (2 doors)214.0 in (5,436 mm)about 64 ft (19.5 m) for the convertible to 66 ft (20 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m)

Capri wrap cost factors

Capri wrap cost is based on the size of the body, the amount of film, and the labor for cut-outs. The car is 214.0 in (5,436 mm) long and uses about 64 ft (19.5 m) to 66 ft (20 m) of 60-inch (1.52 m) cast film. Installing the two long side doors as single pieces adds time. A chrome or patterned film raises the amount to about 74 ft (22.5 m).

  • Film for a full wrap: about 64 ft (19.5 m) for the convertible to 66 ft (20 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.

Capri wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln Capri, first generation, factory photo
Factory color shown

1952–1959 Capri convertible, coupe (first generation)

1952–1959convertible, coupe (2 doors)214.0 in (5,436 mm)

The first generation Lincoln Capri is a 1952–1959 convertible or coupe. A fabric top on the convertible is not wrapped, and the film ends where the top begins. A folding hard top on the same body is wrapped as separate panels. The rest of the body is wrapped in normal pieces.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 64 ft (19.5 m) for the convertible to 66 ft (20 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Capri

A Lincoln Capri can get a partial wrap on the roof, hood, and mirror caps. A chrome delete wraps the window trim and badges with black film. Paint protection film (PPF) is a clear film placed on the front end. These smaller jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln Capri: body, cut-outs and film

The Lincoln Capri vinyl wrap is shaped by two body styles and a long 214.0 in (5,436 mm) body. The convertible uses about 64 ft (19.5 m) of film and the coupe uses about 66 ft (20 m). Each of the two long side doors is one large piece of film. A 60-inch (1.52 m) roll is wide enough for the hood and trunk without seams.

Capri wrap ideas start with the parts that need cut-outs or come off. The two long side doors are each one large piece of film. A fabric top on a convertible is not wrapped, and the film ends where the top begins. A folding hard top is wrapped as panels of its own.

How much vinyl to wrap a Capri depends on the body style. This page covers one generation, the 1952–1959 first generation. The coupe uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. The convertible uses about 64 ft (19.5 m) of the same film.

Questions about wrapping a Lincoln Capri

How much vinyl does it take to wrap a Lincoln Capri?

A full Lincoln Capri wrap takes about 64 ft (19.5 m) for the convertible to 66 ft (20 m) for the coupe, using 60-inch (1.52 m) cast film. The amount depends on the body style. Chrome or patterned film can raise the amount to about 74 ft (22.5 m).

Is the top of a Capri wrapped?

No, the top of a Capri is not wrapped when it is a fabric top. The film ends where the fabric top begins. A folding hard top is wrapped as panels of its own. The rest of the body is wrapped normally.

Which Capri body takes more film?

The Capri coupe takes more film than the convertible. The coupe needs about 66 ft (20 m) of 60-inch (1.52 m) cast film. The convertible uses about 64 ft (19.5 m) of the same film. The difference comes from the coupe's roof.

Can I wrap only the hood or the roof of a Capri?

Yes, you can wrap only the hood or the roof of a Capri. A partial wrap can also cover the mirror caps. The roof can be wrapped with black film as part of a chrome delete. Clear paint protection film on the front end is another partial option.