Wraps by car

Lincoln Mark VII wrap

The Lincoln Mark VII wrap page covers the single generation sold from 1984 to 1992. A full wrap of this coupe takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Drivers looking for a Lincoln Mark VII wrap can use that estimate to plan a vinyl wrap order.

1generations17 mof film for a full wrap

Lincoln Mark VII, first generation, factory photo
Lincoln Mark VII, first generation. Factory color shown.

Lincoln Mark VII wrap colors and ideas

  • Mark VII black wrap
  • Mark VII white wrap
  • Mark VII gray wrap
  • Mark VII silver wrap
  • Mark VII red wrap
  • Mark VII blue wrap
  • Mark VII green wrap
  • Mark VII yellow wrap
  • Mark VII orange wrap
  • Mark VII purple wrap
  • Mark VII pink wrap
  • Mark VII teal wrap
  • Mark VII brown wrap
  • Mark VII gold wrap
  • Mark VII chrome wrap
  • Mark VII color shift wrap
  • Mark VII carbon fiber wrap
  • Mark VII camo and patterned wrap

How much vinyl to wrap a Lincoln Mark VII

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1992coupe (2 doors)202.8 in (5,151 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Mark VII wrap cost factors

A Mark VII wrap cost depends on the size of the coupe and the condition of its paint. The body is 202.8 in (5,151 mm) long, so a full wrap needs about 56 ft (17 m) of 60-inch (1.52 m) cast film. A longer print run for chrome or patterned film raises the material figure to about 69 ft (21 m). Paint correction before the wrap adds labor on a car of these years.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Mark VII wraps by generation

Swipe sideways. Tap a card for the full description.

Lincoln Mark VII, first generation, factory photo
Factory color shown

1984–1992 Mark VII coupe (first generation)

1984–1992coupe (2 doors)202.8 in (5,151 mm)

The first generation Lincoln Mark VII covers production from 1984 to 1992 as a two-door coupe. The single body style keeps the film pattern the same for every year. Paint age is the main variable: panels may be original or repainted, and a test spot comes before a full wrap.

Two long side doors: each door is one large piece of film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Mark VII

A partial wrap on a Mark VII can cover just the roof, the hood, or the mirror caps. The chrome delete covers the window trim and badges with black film. Another option is paint protection film (PPF), which is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Lincoln Mark VII: body, cut-outs and film

The Lincoln Mark VII vinyl wrap starts with a coupe body that measures 202.8 in (5,151 mm) long. Two doors and a fixed roof mean fewer panel gaps than a four-door, so the sides go on as large continuous pieces. The long quarter panels behind the doors add surface area, which is already included in the full-car film estimate. A single generation also keeps the panel count identical for every production year.

Mark VII wrap ideas should account for the two long side doors, since each door is one large piece of film. The door handles, mirrors, and the trim around the side windows are removed or masked before the film goes on. The front and rear bumpers are separate pieces, and the hood is cut around the grille and headlights.

Working out how much vinyl to wrap a Mark VII is simpler because Lincoln built one body style for all years. The coupe shell, doors, and bumpers are the same from 1984 to 1992, so one estimate fits every car. Only the condition of the paint changes from car to car, not the amount of film. A buyer can order the same 56 ft (17 m) roll for a 1984 coupe or a 1992 coupe.

Questions about wrapping a Lincoln Mark VII

How much vinyl does it take to wrap a Lincoln Mark VII?

A Lincoln Mark VII takes about 56 ft (17 m) of 60-inch (1.52 m) cast film for a full wrap. The estimate covers the coupe body from 1984 to 1992, including the long side doors and bumpers.

Can I wrap only the hood or the roof of a Mark VII?

Yes, you can wrap only the hood or the roof of a Mark VII. A partial wrap on this car also covers the mirror caps or the front end with clear paint protection film.

Is a Mark VII hard to wrap?

A Mark VII is not difficult to wrap, but the two long side doors add work because each door is one large piece of film. The body length of 202.8 in (5,151 mm) also means a bigger panel than on a smaller coupe.

How many generations of the Mark VII does this page cover?

This page covers one generation of the Lincoln Mark VII, built from 1984 to 1992.