Wraps by car

Nissan 180SX wrap

The Nissan 180SX wrap page covers the first generation coupe built from 1989 to 1998. A full wrap of this sports car uses about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film the estimate rises to about 49 ft (15 m). The page details a vinyl wrap for the two-door RS13 body.

1generations12.5 mof film for a full wrap

Nissan 180SX, first generation, factory photo
Nissan 180SX, first generation. Factory color shown.

Nissan 180SX wrap colors and ideas

  • Nissan 180SX black wrap
  • Nissan 180SX white wrap
  • Nissan 180SX gray wrap
  • Nissan 180SX silver wrap
  • Nissan 180SX red wrap
  • Nissan 180SX blue wrap
  • Nissan 180SX green wrap
  • Nissan 180SX yellow wrap
  • Nissan 180SX orange wrap
  • Nissan 180SX purple wrap
  • Nissan 180SX pink wrap
  • Nissan 180SX teal wrap
  • Nissan 180SX brown wrap
  • Nissan 180SX gold wrap
  • Nissan 180SX chrome wrap
  • Nissan 180SX color shift wrap
  • Nissan 180SX carbon fiber wrap
  • Nissan 180SX camo and patterned wrap

How much vinyl to wrap a Nissan 180SX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1998coupe (2 doors)178.0 in (4,520 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Nissan 180SX wrap cost factors

Nissan 180SX wrap cost follows the size of the two-door coupe and the film used. The body is 178.0 in (4,520 mm) long, and a full wrap takes about 41 ft (12.5 m) of standard cast film. Patterned or chrome film raises the amount to about 49 ft (15 m). The labor for the two long doors and the simple bumpers also shapes the final figure.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Nissan 180SX wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan 180SX, first generation, factory photo
Factory color shown

1989–1998 Nissan 180SX coupe (first generation)

1989–1998coupe (2 doors)178.0 in (4,520 mm)

The first generation Nissan 180SX was produced from 1989 to 1998 and is the only generation in this catalog. Panels on a car of these years may be original or repainted, so the shop does a test spot before a full wrap. The test spot checks that the film adheres well to the old paint. The coupe body with two long doors is covered with about 41 ft (12.5 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Nissan 180SX

Partial jobs on a Nissan 180SX include a roof wrap or a hood wrap for a smaller color change. Mirror caps can be wrapped to match or contrast with the body. A chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end is another option for this sports car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan 180SX: body, cut-outs and film

A Nissan 180SX vinyl wrap covers a coupe body that is 178.0 in (4,520 mm) long with two long side doors. Each door is one large piece of film, so the installer needs broad sheets and careful squeegee work. The two-door layout keeps the roof area small and the rear haunches simple to cover. Overall the shape is straightforward for a color change wrap.

Nissan 180SX wrap ideas begin with the long side doors and the clean bumpers of the RS13. The doors take one large piece of film each, so patterns with a strong grain or flake need careful alignment along the body line. Window trim and badges can be covered with black film for a chrome delete. The side mirrors come off easily for a neat edge.

How much vinyl to wrap a Nissan 180SX depends on the estimate for the only generation in this catalog. The first generation runs from 1989 to 1998 and is the sole body a full wrap is calculated for. A wrap of the coupe takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film pushes the figure to about 49 ft (15 m).

Questions about wrapping a Nissan 180SX

How much vinyl does it take to wrap a Nissan 180SX?

A full wrap of a Nissan 180SX takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. This estimate is for the coupe body of the first generation. If you choose chrome or patterned film, the amount grows to about 49 ft (15 m).

Can I wrap only the hood or the roof of a Nissan 180SX?

Yes, a partial wrap of only the hood or the roof is possible on a Nissan 180SX. The roof and hood are separate panels that can be wrapped without covering the whole car. Mirror caps and a chrome delete are also jobs smaller than a full wrap.

Is a Nissan 180SX hard to wrap?

A Nissan 180SX is not hard to wrap, but the two long side doors add work. Each door is one large piece of film, so the installer needs to handle a big sheet carefully. The coupe is 178.0 in (4,520 mm) long, which means long stretches of film on the sides. The rest of the body is simple, with clean bumpers and a small roof.

How many generations of the Nissan 180SX does this page cover?

This page covers one generation of the Nissan 180SX. It is the first generation built from 1989 to 1998. The body style is a two-door coupe with the code RS13.