Wraps by car

Nissan 200SX wrap

The Nissan 200SX wrap guide covers the three generations of this sports car, from the 1983–1989 first generation through the 1993–2020 third generation. A full vinyl wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 56 ft (17 m).

3generations15 mof film for a full wrap

Nissan 200SX, third generation, factory photo
Nissan 200SX, third generation. Factory color shown.

Nissan 200SX wrap colors and ideas

  • Nissan 200SX black wrap
  • Nissan 200SX white wrap
  • Nissan 200SX gray wrap
  • Nissan 200SX silver wrap
  • Nissan 200SX red wrap
  • Nissan 200SX blue wrap
  • Nissan 200SX green wrap
  • Nissan 200SX yellow wrap
  • Nissan 200SX orange wrap
  • Nissan 200SX purple wrap
  • Nissan 200SX pink wrap
  • Nissan 200SX teal wrap
  • Nissan 200SX brown wrap
  • Nissan 200SX gold wrap
  • Nissan 200SX chrome wrap
  • Nissan 200SX color shift wrap
  • Nissan 200SX carbon fiber wrap
  • Nissan 200SX camo and patterned wrap

How much vinyl to wrap a Nissan 200SX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2020coupe (2 doors)178.0 in (4,520 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1989–1994coupe (2 doors)178.5 in (4,535 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
1983–1989coupe, hatchback (2 or 3 doors)174.4 in (4,430 mm)about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Nissan 200SX wrap cost factors

The Nissan 200SX wrap cost depends on the body style, the film you pick, and the condition of the paint. A hatchback with its larger tailgate uses more material than a coupe, and chrome or patterned film adds about 10 to 15 percent to the film amount. Paint that is original or resprayed needs a clean, smooth surface before the film goes on. The number of cut-outs, like the door handles on a two-door body, also changes the labor.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Nissan 200SX wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan 200SX, third generation, factory photo
Factory color shown

1993–2020 Nissan 200SX coupe (third generation)

1993–2020coupe (2 doors)178.0 in (4,520 mm)

The third-generation Nissan 200SX from 1993–2020 is a two-door coupe with a length of 178.0 in (4,520 mm). Paint on a car of these years may be factory or repainted, and the film bonds differently to aged clear coat, so a test spot on a hidden area comes before a full wrap. The long doors each take one large piece of film, which reduces seams but calls for an extra pair of hands. A full wrap of this body uses about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Nissan 200SX, second generation, factory photo
Factory color shown

1989–1994 Nissan 200SX coupe (second generation)

1989–1994coupe (2 doors)178.5 in (4,535 mm)

The second-generation Nissan 200SX from 1989–1994 has the S13 body, a two-door coupe measuring 178.5 in (4,535 mm). Production years overlap with the third generation from 1993 to 1994, so an owner of a car from those two years checks the body shape to know which generation it is. The side doors are long and are wrapped as single pieces of film. A full vinyl wrap on this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Nissan 200SX, first generation, factory photo
Factory color shown

1983–1989 Nissan 200SX coupe, hatchback (first generation)

1983–1989coupe, hatchback (2 or 3 doors)174.4 in (4,430 mm)

The first-generation Nissan 200SX from 1983–1989 was sold as a coupe or a hatchback with two or three doors, and the body style decides the panel plan and the film amount. The coupe is 174.4 in (4,430 mm) long and needs about 48 ft (14.5 m) of 60-inch (1.52 m) film, while the hatchback can use up to 51 ft (15.5 m). The hatchback has a tailgate with the rear glass set into it, so the film ends at the edge of the glass. Chrome or patterned film on a hatchback can reach about 57 ft (17.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the coupe to 51 ft (15.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Nissan 200SX

The Nissan 200SX chrome delete covers the bright window trim and badges with black film, and a partial wrap can cover just the roof, hood, or mirror caps. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs let you change the look of the car without wrapping the whole body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan 200SX: body, cut-outs and film

A Nissan 200SX vinyl wrap follows the lines of a compact two-door body, so the side panels are large and the length stays close to 178 inches (4,520 mm). The coupe and hatchback styles have only a few major panels, which makes the layout straightforward for one installer. The third generation is a low coupe with bumpers and skirts that call for careful relief cuts. A wrap on this car looks best when the film is trimmed tight at the door edges and wheel arches.

Nissan 200SX wrap ideas start with the two long side doors, each of which can be covered in one large piece of film. The mirrors and door handles are small parts that need cut-outs, and they come off the car for a cleaner edge. The rear spoiler on later cars is wrapped off the car so the film can tuck under its base. You can also wrap the front bumper as one section with a seam hidden under the lower lip.

To know how much vinyl to wrap a Nissan 200SX you look at the body style and the generation, because the hatchback needs more film than the coupe. A first-generation coupe takes about 48 ft (14.5 m), while the hatchback can use up to 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The second and third generations both sit near 49 ft (15 m). Chrome or patterned film adds roughly ten percent to every figure.

Questions about wrapping a Nissan 200SX

How much vinyl does it take to wrap a Nissan 200SX?

A full wrap of a Nissan 200SX takes about 49 ft (15 m) of 60-inch (1.52 m) cast film on the newest generation. Chrome or patterned film needs about 56 ft (17 m). The first-generation hatchback can use up to 51 ft (15.5 m) of cast film.

Can I wrap only the hood or the roof of a Nissan 200SX?

Yes, you can wrap only the hood or the roof of a Nissan 200SX. A partial wrap on this car commonly covers the roof, hood, or mirror caps. A chrome delete for the window trim and badges is another small job.

Is a Nissan 200SX hard to wrap?

A Nissan 200SX is not especially hard to wrap, but the long doors and the hatchback tailgate add work. Each side door is one large piece of film that needs two people to lay down without wrinkles. The hatchback tailgate has the rear glass in it, so the film must be cut right at the glass edge.

How many generations of the Nissan 200SX does this page cover?

This page covers three generations of the Nissan 200SX: the first generation from 1983–1989, the second from 1989–1994, and the third from 1993–2020.