Wraps by car

Nissan Almera Classic wrap

The Nissan Almera Classic wrap page covers the first generation sedan built from 2006 to 2012. A full vinyl wrap of this compact four-door body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 64 ft (19.5 m) for the same coverage.

1generations15.5 mof film for a full wrap

Nissan Almera Classic, first generation, factory photo
Nissan Almera Classic, first generation. Factory color shown.

Nissan Almera Classic wrap colors and ideas

  • Almera Classic black wrap
  • Almera Classic white wrap
  • Almera Classic gray wrap
  • Almera Classic silver wrap
  • Almera Classic red wrap
  • Almera Classic blue wrap
  • Almera Classic green wrap
  • Almera Classic yellow wrap
  • Almera Classic orange wrap
  • Almera Classic purple wrap
  • Almera Classic pink wrap
  • Almera Classic teal wrap
  • Almera Classic brown wrap
  • Almera Classic gold wrap
  • Almera Classic chrome wrap
  • Almera Classic color shift wrap
  • Almera Classic carbon fiber wrap
  • Almera Classic camo and patterned wrap

How much vinyl to wrap a Nissan Almera Classic

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2012sedan (4 doors)177.6 in (4,510 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Almera Classic wrap cost factors

Almera Classic wrap cost depends on the size of the sedan, the film chosen, and the amount of disassembly. The car's length of 177.6 in (4,510 mm) and four doors set a baseline for labor and material use. A full wrap uses about 51 ft (15.5 m) of cast film, while chrome or patterned film raises the needed amount. Additional work like removing door handles and badges also affects the final cost.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Almera Classic wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Almera Classic, first generation, factory photo
Factory color shown

2006–2012 Almera Classic sedan (first generation)

2006–2012sedan (4 doors)177.6 in (4,510 mm)

The first generation Nissan Almera Classic was produced from 2006 to 2012 as a four-door sedan. Panels on a car of these years may be original or repainted, so a test spot comes before a full wrap. The body code for this generation is B10.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Almera Classic

A partial wrap on an Almera Classic can cover the roof, hood, or mirror caps without doing the whole car. Chrome delete is another option that covers the window trim and badges with black film. Paint protection film (PPF) in clear film can be applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Almera Classic: body, cut-outs and film

A Nissan Almera Classic vinyl wrap covers a single sedan body with four doors and a length of 177.6 in (4,510 mm). The compact size keeps film use lower than on larger cars, but the roof, hood, and trunk are straightforward panels. Door handles, mirror caps, and the trunk lip add small areas that need precise trimming.

Almera Classic wrap ideas often focus on the chrome window trim and badges, which benefit from a chrome delete using black film. The door handles and mirror caps are removed for a clean edge around those parts. Cut-outs are needed for the antenna base, door locks, and any parking sensors if fitted.

When counting film for a full wrap, the only body style is the four-door sedan from 2006 to 2012, so there is no variation between generations. For how much vinyl to wrap an Almera Classic, the estimate is about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Patterned or chrome film needs about 64 ft (19.5 m) because of alignment waste.

Questions about wrapping a Nissan Almera Classic

How much vinyl does it take to wrap a Nissan Almera Classic?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to fully wrap a Nissan Almera Classic. Chrome or patterned film requires about 64 ft (19.5 m) because of alignment and waste.

Can I wrap only the hood or the roof of an Almera Classic?

Yes, you can wrap only the hood or the roof of an Almera Classic. Partial wraps often include the roof, hood, and mirror caps as separate jobs.

Is an Almera Classic hard to wrap?

An Almera Classic is not hard to wrap, but the chrome trim and badges need extra work for a chrome delete. The car's size of 177.6 in (4,510 mm) is manageable, and removing door handles and mirror caps improves the result.

How many generations of the Almera Classic does this page cover?

This page covers one generation of the Almera Classic, built from 2006 to 2012 as a four-door sedan.