Wraps by car

Nissan Almera Tino wrap

The Nissan Almera Tino wrap page covers the first-generation minivan built from 2000 to 2006. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the estimate rises to about 72 ft (22 m).

1generations19 mof film for a full wrap

Nissan Almera Tino, first generation, factory photo
Nissan Almera Tino, first generation. Factory color shown.

Nissan Almera Tino wrap colors and ideas

  • Almera Tino black wrap
  • Almera Tino white wrap
  • Almera Tino gray wrap
  • Almera Tino silver wrap
  • Almera Tino red wrap
  • Almera Tino blue wrap
  • Almera Tino green wrap
  • Almera Tino yellow wrap
  • Almera Tino orange wrap
  • Almera Tino purple wrap
  • Almera Tino pink wrap
  • Almera Tino teal wrap
  • Almera Tino brown wrap
  • Almera Tino gold wrap
  • Almera Tino chrome wrap
  • Almera Tino color shift wrap
  • Almera Tino carbon fiber wrap
  • Almera Tino camo and patterned wrap

How much vinyl to wrap a Nissan Almera Tino

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2000–2006van (5 doors)167.9 in (4,264 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Almera Tino wrap cost factors

The Almera Tino wrap cost depends on the size of the body and the film chosen. A full wrap of the 167.9 in (4,264 mm) van uses about 62 ft (19 m) of cast film, or 72 ft (22 m) with chrome or patterned film. Installer time is set by the sliding door cut-outs and the number of parts removed for a clean edge.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2003: bumpers and lights differ between the versions, and so do the film cuts.

Almera Tino wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Almera Tino, first generation, factory photo
Factory color shown

2000–2006 Almera Tino van (first generation)

2000–2006van (5 doors)167.9 in (4,264 mm)

The first generation Nissan Almera Tino was produced from 2000 to 2006 as a five-door van. It was restyled in 2003, but the body dimensions and panel shapes stayed the same. The sliding side doors are the main point for wrapping: the tracks stay bare and decide where the film is cut.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on an Almera Tino

An Almera Tino partial wrap can cover the roof, hood or mirror caps without wrapping the full van. Chrome delete changes the window trim and badges to black film. Paint protection film (PPF) is a clear film for the front end that guards against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Almera Tino: body, cut-outs and film

A Nissan Almera Tino vinyl wrap has to follow the shape of a five-door van body. The car is 167.9 in (4,264 mm) long, so installers work with a single large roof panel and tall side sections. The sliding doors create a long uninterrupted surface that needs careful film alignment.

Almera Tino wrap ideas start with the front bumper, mirrors and rear hatch, which need cut-outs for lights, sensors and handles. The sliding side doors have tracks that stay bare, and the film is cut along them. Door handles, badges and trim pieces are removed before the film is applied.

An installer needs to know how much vinyl to wrap an Almera Tino for each generation. There is only one generation in this catalog, produced from 2000 to 2006 with a restyling in 2003. The body dimensions stay the same for all years, so the film estimate of 62 ft (19 m) applies to every V10.

Questions about wrapping a Nissan Almera Tino

How much vinyl does it take to wrap a Nissan Almera Tino?

A full Nissan Almera Tino wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the estimate is about 72 ft (22 m). This figure is based on the newest body style in the catalog.

Are the sliding doors of an Almera Tino wrapped?

The sliding doors of an Almera Tino are wrapped, but the tracks stay bare. The film is cut along the edge of the track so the door can open without scraping. This detail is part of the standard wrap process on this car.

Which years of the Almera Tino take the same film cuts?

The 2000–2006 Almera Tino takes the same film cuts for every year. A restyling in 2003 changed some trim details, but the body panels and sliding door tracks are unchanged. The same cut kit works for the whole first generation.

Can I wrap only the hood or the roof of an Almera Tino?

Yes, the hood or the roof of an Almera Tino can be wrapped on its own. A partial wrap may cover the roof, hood or mirror caps without a full body wrap. This is a smaller job that uses less film than a complete color change wrap.