Wraps by car

Nissan Almera wrap

This page covers the Nissan Almera vinyl wrap across its three generations. The newest body is the third generation sedan, produced from 2012 to 2019. A full wrap of that body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film.

3generations17 mof film for a full wrap

Nissan Almera, third generation, factory photo
Nissan Almera, third generation. Factory color shown.

Nissan Almera wrap colors and ideas

  • Almera black wrap
  • Almera white wrap
  • Almera gray wrap
  • Almera silver wrap
  • Almera red wrap
  • Almera blue wrap
  • Almera green wrap
  • Almera yellow wrap
  • Almera orange wrap
  • Almera purple wrap
  • Almera pink wrap
  • Almera teal wrap
  • Almera brown wrap
  • Almera gold wrap
  • Almera chrome wrap
  • Almera color shift wrap
  • Almera carbon fiber wrap
  • Almera camo and patterned wrap

How much vinyl to wrap a Nissan Almera

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–2019sedan (4 doors)183.3 in (4,656 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)
2000–2006hatchback, sedan (3 or 4 or 5 doors)164.7 in (4,184 mm) to 174.6 in (4,436 mm)about 49 ft (15 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
1995–2000hatchback, sedan (3 or 4 or 5 doors)162.2 in (4,120 mm) to 170.1 in (4,320 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Almera wrap cost factors

The Almera wrap cost depends on the film amount, labor, and condition of the car's paint. The car needs between about 48 ft (14.5 m) and 56 ft (17 m) of cast film. A older car may need extra prep time if panels are repainted or have deep scratches. Complex areas like bumpers and door jambs add labor hours.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: sedan (4 doors).
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Almera wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Almera, third generation, factory photo
Factory color shown

2012–2019 Almera sedan (third generation)

2012–2019sedan (4 doors)183.3 in (4,656 mm)

The third generation Nissan Almera (2012–2019) is a sedan that often has aging paint by now. Some panels may be original or repainted, so a test spot tells if the film will bond well. The G15 body is 183.3 in (4,656 mm) long and takes about 56 ft (17 m) of film. Fog lamp cut-outs are needed on some trims.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Nissan Almera, second generation, factory photo
Factory color shown

2000–2006 Almera hatchback, sedan (second generation)

2000–2006hatchback, sedan (3 or 4 or 5 doors)164.7 in (4,184 mm) to 174.6 in (4,436 mm)

The second generation Nissan Almera (2000–2006) came as a hatchback or sedan, with a restyling in 2003. The restyling changed bumpers and lights, so film cut for one version does not fit the other. Lengths run from 164.7 in (4,184 mm) to 174.6 in (4,436 mm). The tailgate's rear glass means the film stops at its edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Nissan Almera, first generation, factory photo
Factory color shown

1995–2000 Almera hatchback, sedan (first generation)

1995–2000hatchback, sedan (3 or 4 or 5 doors)162.2 in (4,120 mm) to 170.1 in (4,320 mm)

The first generation Nissan Almera (1995–2000) offered hatchback and sedan styles. The style decides the panel plan and the film amount for this N15 body. Overall length is 162.2 in (4,120 mm) to 170.1 in (4,320 mm). A full wrap uses about 48 ft (14.5 m) of cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Almera

A partial wrap on an Almera can cover the roof, hood, or mirror caps. For chrome delete, we wrap the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Almera: body, cut-outs and film

The Nissan Almera vinyl wrap work is shaped by the car's compact size and body styles. The third generation is a sedan at 183.3 in (4,656 mm) long. The earlier generations offered hatchback and sedan bodies from 162.2 in (4,120 mm) to 174.6 in (4,436 mm) long. These dimensions keep the film area moderate for a color change wrap.

For Almera wrap ideas, consider the parts that need extra attention. Some third generation trims have fog lamps in the front bumper, which require cut-outs in the film. On the first and second generations, the tailgate includes the rear glass, so the film ends at the edge of the glass. Removing door handles and mirrors gives a cleaner edge and reduces visible seams.

When you ask how much vinyl to wrap an Almera, the generation changes the answer. The first generation needs about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The second generation ranges from about 49 ft (15 m) for the hatchback to 54 ft (16.5 m) for the sedan. The third generation sedan requires about 56 ft (17 m).

Questions about wrapping a Nissan Almera

How much vinyl does it take to wrap a Nissan Almera?

It takes about 56 ft (17 m) of 60-inch (1.52 m) cast film to wrap a Nissan Almera of the newest body. That figure is for the third generation sedan from 2012 to 2019. Earlier generations need less film, from about 48 ft (14.5 m) upward.

Can I wrap only the hood or the roof of an Almera?

Yes, you can wrap only the hood or the roof of an Almera. Partial wraps like these are common for a color change on those panels. Mirror caps are another small job that uses little film.

Is an Almera hard to wrap?

An Almera is moderately hard to wrap because of its compact size and a few tricky parts. The third generation may have fog lamps that need cut-outs in the bumper film. On the older generations, the tailgate with the rear glass means the film ends at the edge of the glass.

How many generations of the Almera does this page cover?

This page covers three generations of the Almera: the first (1995–2000), second (2000–2006), and third (2012–2019).