Wraps by car

Nissan Auster wrap

The Nissan Auster wrap page covers all three generations from 1977 to 1990 and the amount of vinyl wrap each body needs. A full wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on that body uses about 62 ft (19 m).

3generations15.5 mof film for a full wrap

Nissan Auster, third generation, factory photo
Nissan Auster, third generation. Factory color shown.

Nissan Auster wrap colors and ideas

  • Auster black wrap
  • Auster white wrap
  • Auster gray wrap
  • Auster silver wrap
  • Auster red wrap
  • Auster blue wrap
  • Auster green wrap
  • Auster yellow wrap
  • Auster orange wrap
  • Auster purple wrap
  • Auster pink wrap
  • Auster teal wrap
  • Auster brown wrap
  • Auster gold wrap
  • Auster chrome wrap
  • Auster color shift wrap
  • Auster carbon fiber wrap
  • Auster camo and patterned wrap

How much vinyl to wrap a Nissan Auster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1985–1990hatchback, sedan (4 or 5 doors)176.2 in (4,475 mm) to 177.8 in (4,515 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
1981–1985hatchback, sedan (4 doors)166.3 in (4,225 mm) to 168.5 in (4,280 mm)about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1977–1981coupe, sedan (2 or 4 doors)169.7 in (4,310 mm)about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)

Auster wrap cost factors

Auster wrap cost depends on the amount of film, the body style, and the condition of the paint. The third generation needs about 51 ft (15.5 m) of cast film, while the first generation coupe needs about 46 ft (14 m), so the larger car uses more material. A hatchback adds time at the tailgate because the film ends at the edge of the glass. Paint that is failing or has rust means more preparation before the vinyl can be applied.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Auster wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Auster, third generation, factory photo
Factory color shown

1985–1990 Auster hatchback, sedan (third generation)

1985–1990hatchback, sedan (4 or 5 doors)176.2 in (4,475 mm) to 177.8 in (4,515 mm)

The third generation Nissan Auster, from 1985 to 1990, came as a hatchback or a sedan with four or five doors. The body style decides the panel plan and the film amount, because a five-door hatchback has a larger rear hatch than a sedan trunk lid. A full wrap of this body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film. The tailgate includes the rear glass and the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Nissan Auster, second generation, factory photo
Factory color shown

1981–1985 Auster hatchback, sedan (second generation)

1981–1985hatchback, sedan (4 doors)166.3 in (4,225 mm) to 168.5 in (4,280 mm)

The second generation Nissan Auster, from 1981 to 1985, came as a hatchback or a four-door sedan. Paint age on a car of these years means panels may be original or repainted, and a test spot comes before a full wrap. The film estimate is about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback in 60-inch (1.52 m) cast film. A test spot tells the installer which areas will hold the vinyl well.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 49 ft (15 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Nissan Auster, first generation, factory photo
Factory color shown

1977–1981 Auster coupe, sedan (first generation)

1977–1981coupe, sedan (2 or 4 doors)169.7 in (4,310 mm)

The first generation Nissan Auster, from 1977 to 1981, came as a coupe or a sedan with two or four doors. The size of 169.7 in (4,310 mm) and the coupe or sedan body mean a full wrap takes about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan of 60-inch (1.52 m) cast film. The coupe has a longer door and a shorter roof, which changes how the film is cut. The sedan has four separate door panels to wrap.

Film: about 46 ft (14 m) for the coupe to 48 ft (14.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Auster

Partial wrap on a Nissan Auster can cover the roof, hood and mirror caps, while chrome delete covers the window trim and badges. Paint protection film (PPF) is clear film on the front end to guard against stone chips. Auster chrome delete turns bright trim into black, which suits the boxy lines of these cars. A partial wrap on the hood and roof uses less film than a full wrap and can be done in one visit.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Auster: body, cut-outs and film

The Nissan Auster vinyl wrap plan depends on the body style and the length of the car. The first generation is a coupe or a sedan from 169.7 in (4,310 mm) long, while the second generation is a hatchback or sedan from 166.3 in (4,225 mm) to 168.5 in (4,280 mm) long. The third generation is a hatchback or sedan, 176.2 in (4,475 mm) to 177.8 in (4,515 mm), and needs the most material. A mid-size body means the roof and hood are large panels that are simple to cover.

Auster wrap ideas start with the parts that need cut-outs or come off for a clean job. On the T12 hatchback and the second generation hatchback, the tailgate has the rear glass in it, so the film ends at the edge of the glass. The door handles, mirrors, badges and trim usually come off so the vinyl can be tucked, not cut around them. Removing trim on a car of these years can take extra time if clips are brittle, so the installer works slowly.

How much vinyl to wrap an Auster changes by generation, and the third generation needs the most film. The first generation sedan takes about 48 ft (14.5 m), the coupe about 46 ft (14 m), each in 60-inch (1.52 m) cast film. The second generation needs about 48 ft (14.5 m) for the sedan and 49 ft (15 m) for the hatchback with the same width. The third generation needs about 51 ft (15.5 m) in total, which is the highest figure in this catalog.

Questions about wrapping a Nissan Auster

How much vinyl does it take to wrap a Nissan Auster?

A Nissan Auster wrap takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for the newest body. Chrome or patterned film on the same body uses about 62 ft (19 m). The first generation coupe uses less, 46 ft (14 m), while the second generation hatchback uses 49 ft (15 m).

Which Auster body takes more film?

The Auster body that takes more film is the third generation hatchback or sedan, at about 51 ft (15.5 m) in cast film. The first generation coupe takes the least, 46 ft (14 m), and the first generation sedan is in between at 48 ft (14.5 m). The second generation hatchback takes 49 ft (15 m), and its sedan takes 48 ft (14.5 m).

Can I wrap only the hood or the roof of an Auster?

Yes, you can wrap only the hood or the roof of an Auster as a partial wrap, often with the mirror caps. Chrome delete on the window trim and badges is another focused job on this car. Paint protection film, clear film on the front end, is a third partial option that leaves the rest of the body as it is.

Is an Auster hard to wrap?

An Auster is not hard to wrap, but a few details add work. The third generation and second generation hatchbacks have a tailgate with the rear glass in it, so the film ends at the edge of the glass. The first generation coupe has long doors that need careful handling of the vinyl. The mid-size body of 166.3 in (4,225 mm) up means the roof is large but flat, which is straightforward for a patient installer.