Wraps by car

Nissan Bassara wrap

The Nissan Bassara wrap page covers this minivan from 1999–2003, its single generation, and the vinyl wrap material a full wrap of the newest body takes. The Bassara is a five-door van with sliding side doors on a 188.8 in (4,795 mm) body. A complete color change wrap uses about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 76 ft (23 m).

1generations18 mof film for a full wrap

Nissan Bassara, first generation, factory photo
Nissan Bassara, first generation. Factory color shown.

Nissan Bassara wrap colors and ideas

  • Bassara black wrap
  • Bassara white wrap
  • Bassara gray wrap
  • Bassara silver wrap
  • Bassara red wrap
  • Bassara blue wrap
  • Bassara green wrap
  • Bassara yellow wrap
  • Bassara orange wrap
  • Bassara purple wrap
  • Bassara pink wrap
  • Bassara teal wrap
  • Bassara brown wrap
  • Bassara gold wrap
  • Bassara chrome wrap
  • Bassara color shift wrap
  • Bassara carbon fiber wrap
  • Bassara camo and patterned wrap

How much vinyl to wrap a Nissan Bassara

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2003van (5 doors)188.8 in (4,795 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

Bassara wrap cost factors

The Bassara wrap cost depends on the size of the van, the film type, and how much of the body is covered. At 188.8 in (4,795 mm) long, this minivan needs about 59 ft (18 m) of standard cast film for a full wrap. Chrome or patterned film raises the material figure to about 76 ft (23 m). A partial wrap costs less because it covers only chosen panels.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Bassara wraps by generation

Swipe sideways. Tap a card for the full description.

Nissan Bassara, first generation, factory photo
Factory color shown

1999–2003 Bassara van (first generation)

1999–2003van (5 doors)188.8 in (4,795 mm)

The first generation Nissan Bassara has sliding side doors whose tracks stay bare and decide where the film is cut. The wrap installer leaves those tracks unpainted by trimming the film along each edge. This van from 1999–2003 is a five-door body with the JU30 code. The 188.8 in (4,795 mm) length makes the side film the longest single piece of the job.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a Bassara

A partial wrap on a Nissan Bassara can cover the roof, hood, or mirror caps instead of the whole van. A chrome delete replaces the bright window trim and badges with black film for a cleaner look. Paint protection film (PPF) is a clear film applied to the front end to shield it from stone chips. These smaller jobs use less material than the full 59 ft (18 m) estimate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Nissan Bassara: body, cut-outs and film

The Nissan Bassara vinyl wrap has to follow the tall sides and long roof of this 188.8 in (4,795 mm) five-door van. The large flat roof panel takes a wide piece of film and a second pair of hands. The sliding side doors need precise cutting to keep the door tracks bare. The rear hatch has a big surface that is straightforward to wrap.

For Bassara wrap ideas, start with the sliding door tracks because the film is cut along them and the tracks stay bare. The door handles, badges, and side mirrors come off to give the vinyl clean edges without a visible seam. The front and rear bumpers stay on the car and the film is tucked around their edges. A chrome delete covers the window trim and badges with black film.

How much vinyl to wrap a Bassara depends on the film type, because the generation kept the same 188.8 in (4,795 mm) body from 1999 to 2003. A full wrap with standard cast film takes about 59 ft (18 m) of 60-inch (1.52 m) material. Chrome or patterned film needs about 76 ft (23 m) because the pattern has to line up at the seams. The sliding side doors do not change the total, only where the film is cut.

Questions about wrapping a Nissan Bassara

How much vinyl does it take to wrap a Nissan Bassara?

A full wrap of a Nissan Bassara takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the estimate to about 76 ft (23 m) because the pattern must match across seams. These figures are based on the newest body in the catalog, the 1999–2003 first generation.

Are the sliding doors of a Bassara wrapped?

The sliding doors of a Bassara are wrapped, but the tracks stay bare and the film is cut along them. The vinyl covers the door panels up to the edge of each track. The installer trims precisely so the doors can open and close without touching the film.

Can I wrap only the hood or the roof of a Bassara?

Yes, you can wrap only the hood or the roof of a Bassara, as part of a partial wrap. The hood is a single panel that uses a modest piece of film. The roof is larger and benefits from a wide roll of cast film. Mirror caps are another small job for a partial wrap.

Is a Bassara hard to wrap?

A Bassara is not the hardest van to wrap, but the sliding side doors add work. The film must be cut along the door tracks so the tracks stay bare and the doors still move freely. The 188.8 in (4,795 mm) length means long side panels that need careful handling. The tall roof also takes extra time to cover smoothly.